|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
打底层对铝合金表面GLC镀层组织和摩擦学特性的影响
DOI: 10.3724/SP.J.1037.2011.00748, PP. 983-988
Keywords: 非平衡磁控溅射离子镀,GLC镀层,微观结构,结合力,摩擦学性能
Abstract:
采用非平衡磁控溅射离子镀技术在铝合金表面分别制备了以Cr和Al为打底层,Cr-C和Al-Cr-C为过渡层的Cr/Cr-C/类石墨碳(GLC)和Al/Al-Cr-C/GLC复合镀层,并与无打底层制备GLC镀层对比,系统研究了不同镀层微观结构、膜基结合力及摩擦学性能.结果表明,铝合金基体表面Cr打底层呈柱状晶生长,Cr/C过渡层无柱状晶特征,且随过渡层增厚,富Cr区域减少,实现了成分的梯度变化;Al打底层与铝合金基体间为一个整体,没有明显界面;Al-Cr-C过渡层的成分也呈梯度变化;采用不同打底层和过渡层时,GLC层均为非晶态结构.较无打底层制备GLC镀层,Cr/Cr-C/GLC和Al/Al-Cr-C/GLC复合镀层与铝合金基底间的膜基结合力显著增强,以Al为打底层的复合镀层的失效临界载荷最大.磨损实验中,在不同载荷条件下2种复合镀层均具有低的摩擦系数.
| [1] | Wang Y X, Wang L P, Wang S C, Zhang G A, Wood R J K, Xue Q J. Tribol Lett, 2010; 40: 301
|
| [2] | Teer D G. Wear, 2001; 251: 1068
|
| [3] | Renevier N M, Hamphire J, Fox V C, Allen T, Teer D G. Surf Coat Technol, 2001; 142: 67
|
| [4] | Zhao L, Fu Y H, Liu D Y, Zhu X D, He J W. Chin J Inorg Mater, 2005; 20: 181
|
| [5] | (赵蕾, 付永辉, 刘登益, 朱晓东, 何家文. 无机材料学报, 2005; 20: 181)
|
| [6] | Chen D C, Jiang B L, Shi H Y, Long Y N. Vacuum, 2012; 86: 1576
|
| [7] | Shi H Y, Zhang B, Jiang B L, Zhang Y H, Chen Z S. Trans Mater Heat Treat, 2009; 30: 136
|
| [8] | Ichimur H, Ishii Y. Surf Coat Technol, 2003; 165: 1
|
| [9] | Wei T, Yan F, Tian J. J Alloys Compd, 2005; 389: 169
|
| [10] | Sun X, Jiang Z, Xin S, Yao Z. Thin Solid Films, 2005; 471: 194
|
| [11] | Akarca S S, Altenhof W J, Alpas A T. Tribol Int, 2007; 40: 735
|
| [12] | Wu J J. Foundry Technol, 2002; 23: 273
|
| [13] | (吴浚郊. 铸造技术, 2002; 23: 273)
|
| [14] | Xue W B, Shi X L, Hua M, Li Y L. Appl Surf Sci, 2007; 253: 6118
|
| [15] | Donnet C, Erdemir A. Surf Coat Technol, 2004; 180: 76
|
| [16] | Xu B S, Zhu S H, Liu S S. Materials Surface Engineering. Harbin: Harbin Institute of Technology Press, 2005: 1
|
| [17] | (徐滨士, 朱绍华, 刘世参. 材料表面工程. 哈尔滨 : 哈尔滨工业大学出版社, 2005: 1)
|
| [18] | Zhou F, Wang Y, Ding H Y, Wang M L, Yu M, Dai Z D. Surf Coat Technol, 2008; 202: 3808
|
| [19] | Zhu M H, Cai Z B, Lin X Z, Ren P D, Tan J, Zhou Z R. Wear, 2007; 263: 472
|
| [20] | Ding H Y, Dai Z D, Skuiry S C, Hui D. Tribol Int, 2010; 43: 868
|
| [21] | Li H X, Rudnev V S, Zheng X H, Yarovay T P, Song R G. J Alloys Compd, 2008; 462: 99
|
| [22] | Nie X,Wilson A, Leyland A, Matthews A. Surf Coat Technol, 2000; 121: 506
|
| [23] | Dobrzanski L A, Polok M, Panjan P, Bugliosi S, Adamiak M. J Mater Process Technol, 2004; 155-156: 1995
|
| [24] | Baragetti S, Gerosa R, Rivolta B, Silva G, Tordini F. Procedia Eng, 2011; 10: 3375
|
| [25] | Dobrza’nski L A, Polok M, Adamiak M. J Mater Process Technol, 2005; 164-165: 843
|
| [26] | Hua M, Ma H Y, Li J, Mok C K. Surf Coat Technol, 2006; 200: 3612
|
| [27] | Xia C B, Wang D J. Surface Engineering of Aviation Maintenance. Xinyang: Air Force flight School Press, 1997: 206
|
| [28] | (夏成宝, 汪定江. 航空维修表面工程. 信阳: 空军一航院出版社, 1997: 206)
|
| [29] | Wang Y X, Wang L P, Xue Q J. Appl Surf Sci, 2011; 257: 10246
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
