OALib Journal期刊
ISSN: 2333-9721
费用:99美元
|
|
|
镍基高温合金的强化
, PP. 307-321
Abstract:
簡要地評述了鎳基合金的强化机制的发展;对鎳的合金化物理化学基础作了一些初步分析。鎳基高溫合金的三种强化方式固溶强化、沉淀强化与晶界强化也分别进行了討論。
References
[1] | Nutting, J., Arrowsmith, J. M.: Structural Processes in Creep, (Iron Steel Inst., 1962) , p. 147.
|
[2] | Betteridge, W.: The Nimonic Alloys, (Edward Arnold, 1959) .
|
[3] | Mader, S.: Electron Microscopy and Strength of Crystals, (Interscience. 1962) , p. 183.
|
[4] | Ver Snyder, F. L.: High Temperature Materials, Conference Held in Cleveland, Ohio, ed. R. F. Hehemann, (AIME, 1959) , p. 3.
|
[5] | #12
|
[6] | #12
|
[7] | #12
|
[8] | Bieber, C. G., Raudebaugh, R. J.: Precipitation from Solid Solution, (ASM, 1959) , p. 417.
|
[9] | Fell, E. A., Mitchell, W. I., Wakeman, D. W.: Structural Processes in Creep, (Iron Steel Inst., 1962,), p. 136.
|
[10] | #12
|
[11] | Nordheim, R., Grant, N. J.: Trans. AIME, 1954, 200, 211.
|
[12] | Betteridge, W.: Metallurgia, 1961, 63, 79.
|
[13] | Wilde, R. F., Grant, N. J.: Trans. AIME, 1957, 209, 865.
|
[14] | Jahnke, L. P., Frank, R. G.: Metal Progr., 1958, 74, (5) , 77. Jahnke, L. P., Frank, R. G.: Metal Progr., 1958, 74, (6) , 86.
|
[15] | Kaufman, M., Palty, A. E.: Trans. AIME, 1960, 218, 107.
|
[16] | Glenny, E.: Foundary, 1961, 111, 293.
|
[17] | Hagel, W. C., Beattie, Jr., H. J.: Trans. AIME, 1959, 215, 967.
|
[18] | Drennen, D. C., Lund, C. H.: PB, No. 161245, 1961.
|
[19] | Rogen, N. E., Grant, N. J.: Trans. AIME, 1960, 218, 180.
|
[20] | #12
|
[21] | Mihalisin, J. R., Decker, R. F.: Trans. AIME, 1960, 218, 507.
|
[22] | Jaffee, R. I.: Progress in Metal Physics, (Pergamon, 1958) , vol. 7, p. 65.
|
[23] | #12
|
[24] | #12
|
[25] | #12
|
[26] | Hansen, M.: Constitution of Binary Alloys, 2nd ed., (McGraw-Hill, 1958) .
|
[27] | Mihalisin, J. R., Carroll, K. G.: Symposium on Advance in Electron Metallography, (ASTM, 1958) , p. 68.
|
[28] | #12
|
[29] | #12
|
[30] | #12
|
[31] | McLean, D.: Met. Rev., 1962, 7, (28) , 481.
|
[32] | Guard, R. W.: Mechanical Behavior of Materials at Elevated Temperatures, (McGraw-Hill, 1961) , p. 270.
|
[33] | Firey, D. N., Freeman, J. W., White, A. E.: NACA TN-No. 2385, 1951.
|
[34] | Fell, E. A.: Metallurgia, 1961, 63, 157.
|
[35] | Mott, N. F., Nabarro, F. R. N.: Conference on Strength of Solid, (Bristal, 1948) , p. 1.
|
[36] | Flinn, P. A.: Trans. AIME, 1960, 218, 145.
|
[37] | #12
|
[38] | Guard, R.. W., Westbrook, J. H.: Trans. AIME, 1959, 215, 807.
|
[39] | Radavich, J. F., Pennington, W. J.: Metal Progr., 1961, 79, (2) , 94.
|
[40] | Nicholson, R. B., Nutting, J., Hirsch, P. B.: J. Inst. Metals, 1957-1958, 86, 7.
|
[41] | #12
|
[42] | Dew-Hughes, D., Robertson, W. D.: Acta Met., 1960. 8, 147.
|
[43] | Kelly, A., Fine, M. F.: Acta Met., 1957, 5, 365.
|
[44] | Beattie, Jr., H. J., Ver Snyder, F. L.: Trans. Am. Soc. Metals, 1957, 49, 883.
|
[45] | Kelly, A.: Phil. Mag., 1958, 3, 1472.
|
[46] | Kaufman, M.: Trans. AIME, 1963, 227, 405.
|
[47] | Orowan, E.: Symposium on Internal Stresses in Metals and Alloys, (Inst. Metals, 1948) , p. 47.
|
[48] | Radavich, J. F., Couts, Jr., W. H.: Trans. Am, Soc. Metals, 1961, 54, 591.
|
[49] | Fischer, J. C., Hart, E. W., Pry, R. H.: Acta Met., 1953, 1, 336.
|
[50] | Radavich, J. F., Boesch, W. J.: Advance in X-ray Analysis, ed. W. M. Mueller, (Plenum Press, 1960) , vol. 4, p. 233.
|
[51] | 张兴钤:合金的強化,全国第一次金属物理学术报告会論文,1961年,沈阳.
|
[52] | Beattie, Jr., H. J.: Acta Cryst., 1958, 11, 607.
|
[53] | Gregory, E., Goetzel, C. G.: Trans. AIME, 1958, 212, 868.
|
[54] | #12
|
[55] | Cremens, W. S., Grant, N. J.: Proc. Am. Soc. Testing Mater., 1958, 58, 714.
|
[56] | #12
|
[57] | Gatti, A.: Powder Met., 1962, (10) , 77.
|
[58] | #12
|
[59] | Schafer, R. J., Quatinetz, M., Weeton, J. W.: Trans. AIME, 1961, 221, 1099.
|
[60] | #12
|
[61] | 师昌緒:高温材料的发展,1963年中国金属学会学术年会論文,青島.
|
[62] | #12
|
[63] | Greenwald, M., Sparrow, W. H.: J. Metals, 1963, 15, 78.
|
[64] | McLean, D.: Vancancies and Other Point Defects in Metals and Alloys, (Inst. Metals, 1958) , p. 159.
|
[65] | Cottrell, A. H.: Symposium on Creep and Fracture of Metals at High Temperature, (London, 1956) , p. 141.
|
[66] | #12
|
[67] | Glen, J.: J. Iron Steel Inst. (London), 1958, 189, 333.
|
[68] | Schoeck, G.: Mechanical Behavior of Materials at Elevated Temperatures, (McGraw-Hill, 1961) , p. 79.
|
[69] | Hale, K. F.: Vierter Internationaler Kongress fur Electronen Mikroskopie, (Berlin, 1958) , p. 650.
|
[70] | Cottrell, A. H., Relation of Properties to Microstructure, (ASM, 1954) , p. 330.
|
[71] | #12
|
[72] | Nutting, J., Arrowsmith, J. M.: Structural Processes in Creep, (Iron Steel Inst., 1962) , p. 147.
|
[73] | #12
|
[74] | Mader, S.: Electron Microscopy and Strength of Crystals, (Interscience. 1962) , p. 183.
|
[75] | Betteridge, W., Franklin, A. W.: J. Inst. Metals, 1956-1957, 85, 473.
|
[76] | #12
|
[77] | Weaver, C. W.: J. Inst. Metals, 1959-1960, 88, 296.
|
[78] | #12
|
[79] | Fleetwood, M. J.: J. Inst. Metals, 1962, 90, 429.
|
[80] | Fell, E. A., Mitchell, W. I., Wakeman, D. W.: Structural Processes in Creep, (Iron Steel Inst., 1962,), p. 136.
|
[81] | Weaver, C. W.: J. Inst. Metals, 1962, 90, 404.
|
[82] | Nordheim, R., Grant, N. J.: Trans. AIME, 1954, 200, 211.
|
[83] | #12
|
[84] | Wilde, R. F., Grant, N. J.: Trans. AIME, 1957, 209, 865.
|
[85] | McLean, D.: Grain Boundaries in Metals, (Oxford, 1957) , p. 322.
|
[86] | Kaufman, M., Palty, A. E.: Trans. AIME, 1960, 218, 107.
|
[87] | McLean, D.: Mechanical Properties of Metals, (Wiley, 1962) , p. 223.
|
[88] | Hagel, W. C., Beattie, Jr., H. J.: Trans. AIME, 1959, 215, 967.
|
[89] | Cottrell, A. H.: Structural Processes in Creep, (Iron Steel Inst. 1962) , p. 1.
|
[90] | Rogen, N. E., Grant, N. J.: Trans. AIME, 1960, 218, 180.
|
[91] | #12
|
[92] | Mihalisin, J. R., Decker, R. F.: Trans. AIME, 1960, 218, 507.
|
[93] | Davies, P. W., Dennison, J. P.: J. Inst. Metals, 1958-1959, 87, 119.
|
[94] | #12
|
[95] | Chang, H. C. (张兴钤), Grant, N. J.: Trans. AIME, 1953, 197, 1175. Chang, H. C. (张兴钤), Grant, N. J.: Trans. AIME, 1956, 206, 544.
|
[96] | #12
|
[97] | Gemmell, G. D., Grant, N. J.: Trans. AIME, 1957, 209, 417.
|
[98] | Mihalisin, J. R., Carroll, K. G.: Symposium on Advance in Electron Metallography, (ASTM, 1958) , p. 68.
|
[99] | #12
|
[100] | Resnick, R., Seigle, L.: Trans. AIME, 1957, 209, 87.
|
[101] | McLean, D.: Met. Rev., 1962, 7, (28) , 481.
|
[102] | Firey, D. N., Freeman, J. W., White, A. E.: NACA TN-No. 2385, 1951.
|
[103] | Mott, N. F., Nabarro, F. R. N.: Conference on Strength of Solid, (Bristal, 1948) , p. 1.
|
[104] | Chen, C. W. (陈志文), Machlin, E. S.: Trans. AIME, 1957, 209, 829.
|
[105] | #12
|
[106] | Reid, B. J., Greenwood, J. N.: Trans. AIME, 1958, 212, 503.
|
[107] | Nicholson, R. B., Nutting, J., Hirsch, P. B.: J. Inst. Metals, 1957-1958, 86, 7.
|
[108] | Weaver, C. W.: Acta Met., 1960, 8, 343.
|
[109] | Dew-Hughes, D., Robertson, W. D.: Acta Met., 1960. 8, 147.
|
[110] | Weaver, C. W.: J. Inst. Metals, 1958, 87, 126.
|
[111] | Kelly, A., Fine, M. F.: Acta Met., 1957, 5, 365.
|
[112] | Conrad, H.: Mechanical Behavior of Materials at Elevated Temperatures, (McGraw-Hill, 1961) , p. 218.
|
[113] | Kelly, A.: Phil. Mag., 1958, 3, 1472.
|
[114] | Orowan, E.: Symposium on Internal Stresses in Metals and Alloys, (Inst. Metals, 1948) , p. 47.
|
[115] | Zener, C.: Elasticity and Anelasticity of Metals, (Univ. of Chicago Press, 1948) , p. 158.
|
[116] | Fischer, J. C., Hart, E. W., Pry, R. H.: Acta Met., 1953, 1, 336.
|
[117] | Gifkins, R. D.: Acta Met., 1956, 4, 98.
|
[118] | 张兴钤:合金的強化,全国第一次金属物理学术报告会論文,1961年,沈阳.
|
[119] | Weaver, C. W.: J. Inst. Metals, 1959-1960, 88, 296.
|
[120] | #12
|
[121] | Gregory, E., Goetzel, C. G.: Trans. AIME, 1958, 212, 868.
|
[122] | Pennington, W. J.: Metal Progr., 1958, 73, (3) , 82.
|
[123] | Cremens, W. S., Grant, N. J.: Proc. Am. Soc. Testing Mater., 1958, 58, 714.
|
[124] | Decker, R. F., Freeman, J. W.: Trans. AIME, 1960, 218, 277.
|
[125] | Gatti, A.: Powder Met., 1962, (10) , 77.
|
[126] | McLean, D.: J. Inst. Met., 1957, 85, 468.M
|
[127] | Schafer, R. J., Quatinetz, M., Weeton, J. W.: Trans. AIME, 1961, 221, 1099.
|
[128] | 师昌緒:高温材料的发展,1963年中国金属学会学术年会論文,青島.
|
[129] | Greenwald, M., Sparrow, W. H.: J. Metals, 1963, 15, 78.
|
[130] | Cottrell, A. H.: Symposium on Creep and Fracture of Metals at High Temperature, (London, 1956) , p. 141.
|
[131] | Glen, J.: J. Iron Steel Inst. (London), 1958, 189, 333.
|
[132] | Hale, K. F.: Vierter Internationaler Kongress fur Electronen Mikroskopie, (Berlin, 1958) , p. 650.
|
[133] | #12
|
[134] | #12
|
[135] | Betteridge, W., Franklin, A. W.: J. Inst. Metals, 1956-1957, 85, 473.
|
[136] | Weaver, C. W.: J. Inst. Metals, 1959-1960, 88, 296.
|
[137] | Fleetwood, M. J.: J. Inst. Metals, 1962, 90, 429.
|
[138] | Weaver, C. W.: J. Inst. Metals, 1962, 90, 404.
|
[139] | #12
|
[140] | McLean, D.: Grain Boundaries in Metals, (Oxford, 1957) , p. 322.
|
[141] | McLean, D.: Mechanical Properties of Metals, (Wiley, 1962) , p. 223.
|
[142] | Cottrell, A. H.: Structural Processes in Creep, (Iron Steel Inst. 1962) , p. 1.
|
[143] | #12
|
[144] | Davies, P. W., Dennison, J. P.: J. Inst. Metals, 1958-1959, 87, 119.
|
[145] | Chang, H. C. (张兴钤), Grant, N. J.: Trans. AIME, 1953, 197, 1175. Chang, H. C. (张兴钤), Grant, N. J.: Trans. AIME, 1956, 206, 544.
|
[146] | Gemmell, G. D., Grant, N. J.: Trans. AIME, 1957, 209, 417.
|
[147] | Resnick, R., Seigle, L.: Trans. AIME, 1957, 209, 87.
|
[148] | Chen, C. W. (陈志文), Machlin, E. S.: Trans. AIME, 1957, 209, 829.
|
[149] | Reid, B. J., Greenwood, J. N.: Trans. AIME, 1958, 212, 503.
|
[150] | Weaver, C. W.: Acta Met., 1960, 8, 343.
|
[151] | Weaver, C. W.: J. Inst. Metals, 1958, 87, 126.
|
[152] | Conrad, H.: Mechanical Behavior of Materials at Elevated Temperatures, (McGraw-Hill, 1961) , p. 218.
|
[153] | Zener, C.: Elasticity and Anelasticity of Metals, (Univ. of Chicago Press, 1948) , p. 158.
|
[154] | Gifkins, R. D.: Acta Met., 1956, 4, 98.
|
[155] | Weaver, C. W.: J. Inst. Metals, 1959-1960, 88, 296.
|
[156] | #12
|
[157] | Pennington, W. J.: Metal Progr., 1958, 73, (3) , 82.
|
[158] | Decker, R. F., Freeman, J. W.: Trans. AIME, 1960, 218, 277.
|
[159] | McLean, D.: J. Inst. Met., 1957, 85, 468.M
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|