Rosado L, Jain V K, Trivedi H K. Wear, 1997; 212: 19
[4]
Pearson P K, Dickinson T W. in: Hoo J J C ed., Effect of Steel Manufacturing Processes on the Quality of Bearing Steels, ASTM STP 987, Philadelphia, PA: American
[5]
society for testing and materials, 1988: 113
[6]
Xia G Z. China Aeronautical Materials Handbook, Beijing: China Standard Press, 1988: 20
[7]
(夏恭枕. 中国航空材料手册. 北京: 中国标准出版社, 1988: 20)
[8]
Boehmer H J, Ebert F J, Trojahn W. J Soc Tribol Lubr Eng, 1992; 48: 28
[9]
Braza J F, Pearson P K. in: Hoo J J C ed., Creative Use of Bearing Steels, ASTM STP 1195, Philadelphia, PA: American society for testing and materials, 1993: 49
[10]
Fu Y Q, Gu Y W, Batchelor A W, Zhou W. Mater Sci Technol, 1998; 14: 461
[11]
Harris T A, Skiller J, Spitzer R F. Tribol Trans, 1992, 35: 731
[12]
Liu J D, Wang G C, Chen K M, Xu Z L, Hou D P. Met Heat Treat, 2006; 31: 57
[13]
(刘菊东, 王贵成, 陈康敏, 许志龙, 侯达盘. 金属热处理, 2006; 31: 57)
[14]
Ma S Y, Xu J H, He X C, Tan M, Li J B. Acta Metall Sin, 2003; 39: 168
[15]
(马素媛, 徐建辉, 贺笑春, 覃明, 李家宝. 金属学报, 2003; 39: 168)
[16]
Yang Y Y, Fang H S, Huang W G. Tribol Int, 1996; 29: 425
[17]
Gao C Q. Friction Metallography. Harbin: Harbin Institute of Technology Press, 1988: 32
[18]
(高彩桥. 摩擦金属学. 哈尔滨: 哈尔滨工业大学出版社, 1988: 32)
[19]
Fu Y F, Cui L J, L iu Y L, Yan Y J. Heavy Machin Sci Technol, 2003; 4: 37
[20]
(付云峰, 崔连进, 刘雅琳, 严衍军. 重型机械科技, 2003; 4: 37)
[21]
Boehmer H J, Ebert F J, Trojahn W. Lubr Eng, 1992; 48: 28
[22]
B¨ohmer H J. in: Hoo J J C ed., Creative Use of Bearing Steels, ASTM STP 1195, Philadelphia, PA: American society for testing and materials, 1993: 34
