全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
金属学报  1979 

K_Ⅰ,K_Ⅱ复合型裂纹的脆性断裂

, PP. 380-391

Full-Text   Cite this paper   Add to My Lib

Abstract:

本文用三点弯曲和四点弯曲试样,在K_Ⅱ/K_Ⅰ=0—14的范围内,对GC-4超高强度钢、30Cr2MoV中强度转子钢和稀土球墨铸铁进行了线弹性平面应变复合型脆断试验。结果表明复合型裂纹的脆断开裂方向与现有的三种复合型理论符合较好;但是,复合型裂纹扩展阻力随K_Ⅱ/K_Ⅰ比值增加而增大,与现有复合型理论差别较大。本文从塑性区的形状、大小和裂纹顶端在开裂方向的应力状态等方面对此问题进行了分析并指出,现有理论关于复合型裂纹扩展阻力与变形特征无关的假设,对于具有一定塑性变形能力的金属材料,是不合适的。文章还对简单且偏于安全的处理复合型问题的工程分析方法作了讨论。

References

[1]  Ueda, Y. Iked, K. et al., Advances in Research on the Strength and Fracture of Materials, Vol. 2A, Ed. by D. M. R. Taplin, 4th Int. Conf. Fracture, June 1977, University of Waterloo, Canada, pp. 173--182.
[2]  Erdogan, F. and Sih, G. C., J. Basic Eng., 85 (1963) , 519.
[3]  Pook, L. P., Eng. Fract. Mech., 3 (1971) , 205.
[4]  力学所断裂力学组,力学,(1976) ,№ 2,98.
[5]  Williams, F. G. and Ewing, P. D., Int. J. Fract. Mech., 8 (1972) , 441.
[6]  Sih, G. C., Methods of Analysis and Solutions of Crack Problems, Ed. by G. C. Sih, Leyden, Noordhoff International Publishing, 1973, p. 221.
[7]  Hussain, M. A., Pu, S. L. and Underwood, J., Amer. Soc. Test. Mater., Spec. Tech. Publ., № 560, 1974, p. 2.
[8]  Wilson, W. K., Clark. W. G. and Wessel, E. T., AD 682754, 1968.
[9]  Wang Tzu-chiang (王自强), Advances in Research on the Strength and Fracture of Materials, Vol. 4, Ed. by D. M. R. Taplin, 4th. Int. Conf. Fracture, June 1977, University of Waterloo, Canada, pp. 135--154.
[10]  Finnie, I. and Weiss, H. D., Int. J. Fract., 10 (1974) , 136.
[11]  力学所断裂力学组,力学,(1976) , № 3,168.
[12]  Shan, R. C., Amer. Soc. Test. Mater., Spec. Tech. Publ., № 560, 1974, pp. 29--52.
[13]  Wang Keren(王克仁),Xu Jilin(徐纪林)and Gao Hua(高桦),Scientia, Sinica 22 (1979) , 579.
[14]  Ueda, Y. Iked, K. et al., Advances in Research on the Strength and Fracture of Materials, Vol. 2A, Ed. by D. M. R. Taplin, 4th Int. Conf. Fracture, June 1977, University of Waterloo, Canada, pp. 173--182.
[15]  McLintock, F. A. and Irwin, G. R., Amer. Soc. Test. Mater., Spec. Tech. Publ., № 381, 1964, p. 84
[16]  Erdogan, F. and Sih, G. C., J. Basic Eng., 85 (1963) , 519.
[17]  力学所断裂力学组,力学,(1976) ,№ 2,98.
[18]  Sih, G. C., Methods of Analysis and Solutions of Crack Problems, Ed. by G. C. Sih, Leyden, Noordhoff International Publishing, 1973, p. 221.
[19]  Hussain, M. A., Pu, S. L. and Underwood, J., Amer. Soc. Test. Mater., Spec. Tech. Publ., № 560, 1974, p. 2.
[20]  Wang Tzu-chiang (王自强), Advances in Research on the Strength and Fracture of Materials, Vol. 4, Ed. by D. M. R. Taplin, 4th. Int. Conf. Fracture, June 1977, University of Waterloo, Canada, pp. 135--154.
[21]  力学所断裂力学组,力学,(1976) , № 3,168.
[22]  Wang Keren(王克仁),Xu Jilin(徐纪林)and Gao Hua(高桦),Scientia, Sinica 22 (1979) , 579.
[23]  McLintock, F. A. and Irwin, G. R., Amer. Soc. Test. Mater., Spec. Tech. Publ., № 381, 1964, p. 84

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133