|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
Be对铸态Al-11Si-0.3Mg合金时效效果的影响
, PP. 43-46
Keywords: 铝硅合金,Be添加,铸态时效
Abstract:
采用差分扫描量热分析和硬度测定手段，研究了元素Be对铸态Al-11Si-0.3Mg(质量分数,%)合金时效效果的影响.结果表明在Al-11Si-0.3Mg合金中加入0.25%的Be,铸态时效时硬化相析出速度加快,析出热效应增大,时效硬化效果明显增加.动力学分析表明亚稳相β’的析出符合Avrami公式,Be的加入对亚稳相β’的生长方式参数n影响不大,但明显增大了亚稳相β’的形核率参数k.金属型铝硅合金铸件中存在很多空位“陷阱”,Be与空位结合阻止空位迁移消失可以解释Be对亚稳相β’形核率的影响.
| [1] | Shivkumar S, Keller C, Apelian D. AFS Trans, 1990; 98:905
|
| [2] | Kang H G, Kida M, Miyahara H, Ogi K. AFS Trans, 1999;107: 507
|
| [3] | Kaczorowski M, Bindas J. Aluminium, 1994; 9/10: 566
|
| [4] | Crowell N, Shivkumar S. AFS Trans, 1995; 103: 721
|
| [5] | Caceres C H, Wang Q G. AFS Trans, 1996; 104: 1039
|
| [6] | Shivkumar S, Wang L, Keller C. AFS Trans, 1995; 103:705
|
| [7] | Bailey W A. J Inst Met, 1967; 95: 443
|
| [8] | Ouellet P, Samuel F H. J Mater Sci, 1999; 34: 4671
|
| [9] | Eskin D G, Massardier V, Merle P A. J Mater Sci, 1999;34: 811
|
| [10] | Malinov S, Guo Z. Metall Mater Trans A, 2001; 32A: 879
|
| [11] | Xu Z Y. The Theory of Phase Transformations. Beijing: Science Press, 1988: 32(徐祖耀.相变原理.北京:科学出版社, 1988:32)
|
| [12] | Friend C M, Luxton S D. J Mater Sci, 1988; 23: 3173
|
| [13] | kim T S, kim T H, Oh K H, I.Lee H. J Mater Sci, 1992;27: 2599
|
| [14] | Samuel A M, Samuel F H. AFS Trans, 1994; 102: 397x
|
| [15] | Murali S, Raman K S. Cast Met, 1991; 4: 31
|
| [16] | Gregson P J, Flower H M, Tite C N J. Mater Sci Technol,1986; 2: 349．
|
| [17] | Xiao T, Youdelis W V. Mater Sci Technol, 1989; 5: 991
|
| [18] | Youdelis W V, Fang W. Mater Sci Technol, 1994; 10: 1031
|
| [19] | Zhen 1, Fei W D, Kang S B. J Mater Sci, 1997; 32: 1895
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
