Kattamis T Z, Piccone T J. Mater Sci Eng, 1991; A131:265
[2]
Turng L S, Wang K K. J Mater Sci, 1991; 26: 12173
[3]
Loue W R, Landkroon S, Kool W H. Mater Sci Eng, 1992;9: 241
[4]
Mada M, Ajersch F. Mater Sci Eng, 1996; A212: 157
[5]
Mada M, Ajersch M. Mater Sci Eng, 1996; A212: 171
[6]
Modigell M, Koke J. In: Bhasin A K eds., Proc 5th Int Conf on Semi-Solid Processing Of Alloys and Composites,Colorado School of Mines, 1998: 417
[7]
Modigell M, Koke J. Mechan Time-Depend Mater, 1999;3: 15
[8]
Quaak C J, Katgerman L, Kool W H. In: Kirkwood D H, Kapranos P eds., Proc 4th Int Conf on Semi-Solid Processing of Alloys and Composites, The University of Sheffield, 1996: 35
[9]
Kumar P, Martin C L, Brown S. Acta Metall Mater, 1994; 42: 3595
[10]
Koke J, Modigell M. Proc Int Symp on Advanced Forming and Die Manufacturing Technology, Pusan, South Korea, 1999: 101
[11]
Koke J, Modigell M, Peter J. Appl Mech Eng, 1999; 4: 345
[12]
Burgos G R, Alexandrou A N. J Rheology, 1999; 43: 485
[13]
Cross J. Colloid Sci, 1965; 20: 417
[14]
Cheng D C H, Inter J. Cosmetic Sci, 1987; 9: 151
[15]
Alexandrou A N, Burgos G R, Entov V M. In: Chiarmetta G J, Rosso M eds., Proc 6th Int Coof on Semi-Solid Processing of Alloys and Composites, Turin, Italy: Politenico di Torion, 2000: 553
[16]
Kirkwood D H. Int Mater Rev, 1994; 39: 173
[17]
Flemings M C. Metall Trans, 1991; 22A: 957
[18]
Fan Z. Int Mater Rev, 2002; 47: 49
[19]
Joly P A, Mehrabian R. J Mater Sci, 1976; 11: 1393
[20]
Wang N, Shu G, Yang J. Mater Trans JIM, 1990; 31: 715
[21]
Kirkwood, Ward P J, Barkhudarov M, Chin S B, Atkinson H V, Liu Y. In: Chiarmetta G L, Rosso M eds., Proc 6th Int Coof on Semi-Solid Processing of Alloys and Composites, Turin, Italy: Politenico di Torion, 2000: 545
[22]
Kumar P, Martin C L, Brown S. Metall Trans, 1993: 24A: 1107
[23]
Chen J Y, Fan Z. Mater Sci Technol, 2002; 18: 237
[24]
Fan Z, Chen J Y. Mater Sci Technol, 2002; 18: 243
[25]
Chen J Y, Fan Z. Mater Sci Technol, 2002; 18: 250
[26]
Fan Z, Chen J Y. Mater Sci Technol, 2002; 18: 258
[27]
Sharma K C, Ferreira J H, Govender G, Damm O. In: Chiarmetta G L, Rosso M eds., Proc 6th Int Coof on Semi-Solid Processing of Alloys and Composites, Turin, Italy: Politenico di Torion, 2000: 253
[28]
Kopper A, Apelian D. In: Chiarmetta G L, Rosso M eds., Proc 6th In t Coof on Semi-Solid Processing of Alloys and Composites, Turin, Italy: Politenico di Torion, 2000: 379
[29]
Ito Y, Flemings M C, Cornie J A. In: Sekhar J A, Dantzig J A eds., Nature and Properties of Semi-Solid Materials, Warrendale, Pennsylvania: The Metals Society of AIME, 1991: 3
[30]
Sigworth G K. Can Metall Q, 1996; 35: 101
[31]
Suery M, Zavaliangos A. In: Chiarmetta G L, Rosso M eds., Proc 6th Int Coof on Semi-Solid Processing of Alloys and Composites, Turin, Italy: Politenico di Torion, 2000: 129
[32]
Alexandrou A N, Burgos G R, Entov V M. In: Chiarmetta G L, Rosso M eds., Proc 6h Int Coof on Semi-Solid Processing of Alloys and Composites, Turin, Italy: Politenico di Torion, 2000: 161
[33]
Burgos G R, Alexandrou A N, Entov V. J Mater Proc Technol, 2001; 110: 164
[34]
Matin C L, Kumar P, Brown S. Acta Metall Mater, 1994; 42: 3603
