|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
包晶合金定向凝固平界面前沿的形核分析
, PP. 20-26
Keywords: 成分过冷,定向凝固,包晶合金
Abstract:
利用成分过冷和充分形核判据以及定向凝固中相稳定生长的最高界面温度假设,在包晶合金定向凝固初始过渡区及其之后两相低速平界面凝固时建立了初生相和包晶相界面前沿发生第二相形核转变所满足的成分条件,确定了不同凝固距离下出现两相平界面凝固带状组织的成分区间.Fe--Ni和Pb--Bi包晶合金理论计算结果与现有的实验结果进行了对比,两者吻合较好.
| [1] | Kerr H W, Kurz W. Inter Mater Rev, 1996; 41:129
|
| [2] | Barker N J W, Hellawell A. Metal Sci, 1974; 8:353
|
| [3] | Brody H D, David S A. Int Conf on Solidification and Casting, Institute of Metals, London, 1977:144
|
| [4] | Tichener A P, Spittle J A. Acta Metall, 1975; 23:497
|
| [5] | Ostowski A, Langer E W. Int Conf on Solidification and Casting, Institute of Metals, London, 1977:139
|
| [6] | Boettinger W J. Metall Trans, 1974; 5:2203
|
| [7] | Trivedi R. Metall Mater Trans, 1995; 26A: 1583
|
| [8] | Zeissler M K, Lograsso T. Metall Mater Trans, 1997; 28A: 1543
|
| [9] | Kurz W, Trivedi R. Metall Mater Trans, 1996; 27A: 625
|
| [10] | Tokieda K, Yasuda H, Ohnaka I. Mater Sci Eng, 1999; A262:241
|
| [11] | Karma A, Rappel W J, Fuh B C, Trivedi R. Metall Mater Trans, 1998; 29A: 1457
|
| [12] | Trivedi R, Park J S. J Cryst Growth, 2002; 235:572
|
| [13] | Hunziker O, Vandyoussefi M. Kurz W. Acta Mater, 1998; 46:6325
|
| [14] | Tiller W A. The Science of Crystallization: Macroscopic Phenomena and Defect Generation. Cambribge: Cambridge University Press, 1991:143
|
| [15] | Hu H Q. Solidification Principle of Metals. The 2nd edition. Beijing: Machinary Industry Press, 2000:114(胡汉起.金属凝固原理.第2版,北京:机械工业出版社,2000:114)
|
| [16] | Umeda T. Okane T, Kurz W. Acta Mater, 1996; 44:4214
|
| [17] | Umeda T, Okane T. Sci Technol Adv Mater, 2001; 2:239
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
