Banerji S K, McMahon Jr C J, Feng H C. Metall Trans A, 1978; 9A(2) : 237
[2]
Bandyopadhyay N, Kameda J, McMahon Jr C J. Metall Trans A, 1983; 14A(5) : 881
[3]
Proctor R P M, Paxton H W. Trans Am Soc Met, 1969;62(4) : 989
[4]
McDarmaid D S. Met Technol, 1978; 5(1) : 7
[5]
Lessar J F, Gerberich W W. Metall Trans A, 1976; 7A:953
[6]
Padmanabhan R, Wood W E. Metall Trans A, 1983;14A(11) : 2347
[7]
Lin D L, Lan Y, Wu J S. Metall Trans A, 1988; 19A(9) :2225
[8]
Li G F, Wu R G, Lei T C. Metall Trans A, 1990; 21A(2) :503
[9]
Kawasaki K, Chiba T, Koga H, Yamazaki T. Tetsu-to-Hagane, 1987; 73(16) : 2298(川奇一博, 千叶贵世, 古贺久喜, 山崎隆雄.铁钢, 1987;73(16) : 2298)
[10]
Webster D. Trans ASM,1969; 62: 759
[11]
Weng Y Q. Ultra Steel 2000, Proc Inter Workshop on the Innovative Structural Materials for Infrastructure in 21st Century. Japan, Tsukuba: NIMS, 2000: 11
[12]
Chu W Y. Hydrogen Damage and Delayed Failure. Bei-(褚武扬.氢损伤和滞后断裂.北京: 冶金工业出版社, 1988:474)
Chu W Y, Qiao L J, Chen Q Z, Gao K W. Fracture and Environmental Fracture. Beijing: Science Press, 2000:149(褚武扬, 乔利杰, 陈奇志, 高克玮.断裂与环境断裂. 北京:科学出版社, 2000: 149)
[16]
Umemoto M, Tamura I. J Heat Treat, 1984; 24(6) : 334(梅本, 田村今男. 热处理, 1984; 24(6) : 334)
[17]
The Commercial and Industrial Ministry of Japan. Iron & Steel World, 1996; (12) : 18(通商产业省基础产业局制铁课. 铁钢界, 1996; (12) : 18)
[18]
Banerji S K, McMahon Jr. C J, Feng H C. Metall Trans A, 1978; 9A(2) : 237
[19]
Tien J K. In: Thompson A W, Bernstein I M eds, Met Soc AIMK,1976: 309
[20]
Hui W J. PhD Thesis, Beijing: Central Iron & Steel Research Institute, 2003(惠卫军.钢铁研究总院博士学位论文, 北京, 2003)
[21]
Li G F, Wu R G, Lei T C. Metall Trans A, 1992; 23A(10) :2879
[22]
Pressouyre G M. Metall Trans A, 1979; 10A(10) : 1571
