|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
快速凝固(2024Al)-20Si-5Fe合金的磨损行为
, PP. 467-473
Keywords: 快速凝固,耐磨铝合金,磨损失效
Abstract:
采用双级雾化水冷快凝与粉末冶金技术制备了(2024Al)-20Si-5Fe(质量分数,%)耐磨合金,分析了合金的微观组织,利用磨损实验研究了合金的耐磨性和磨损失效形式结果表明快凝粉末冶金合金具有比铸造合金更细小的微观组织,更高的耐磨性和减磨性.耐磨性是铸造合金的2.5-4倍.快凝合金的磨损失效形式主要是磨粒磨损和疲劳磨损.而铸造合金的磨损失效形式主要是磨粒磨损、粘着磨损和部分氧化磨损.
| [1] | Yuan X G, Xu D M, Li Q C. Trans Nonferrous Met SocChin, 1997; 7(Suppl.1): 358
|
| [2] | Mocellin A A, Fougeres R, Gobin P F. J Mater Sci, 1993;28. 4855]
|
| [3] | Compilation Committee of Cast Nonferrous Alloys andSmelting. Cast Nonferrous Alloys and Smelting. Bei-
|
| [4] | (《铸造有色合金及熔炼》联合编写组编.铸造有色合金及熔炼.北京:国防工业出版社,1981:9)
|
| [5] | Wang Z T, Zhang Z L. Structure and Properties of Alu-minium Allog. Beijing: Metallurgy Industry Press, 1988:313
|
| [6] | (王祝堂. 张振录.铝合金的组织与性能.北京:冶金工业出版社．1988:313)
|
| [7] | Dciss P. Recent Met Powder Rep, 1983; 38: 185
|
| [8] | Amano N, Odani Y. Met Powder Rep, 1989, 44: 186
|
| [9] | Zhou J, Duszczyk J, Korevaar B M. J Mater Sci, 1991;26: 3041
|
| [10] | Zhou J, Duszczyk J, Korevaar B M. J Mater Sci, 1992;27: 3341
|
| [11] | Yuan X G, Ren L Q, Cui C S, Xu D M, Li Q C. J MaterSci Technol, 1998; 14: 402
|
| [12] | Amano N, Odani Y, Takeda Y. Met Powder Rep, 1985;40: 640
|
| [13] | Yuan X G, Ren L. Q, ZhangJ. F, Cui C. S, Li Q C. ActaMetall Sin. 35: 482
|
| [14] | (袁晓光．任露泉.张锦峰.崔成松.李庆春.金属学报．1999;35:482)
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
