Juric D, Tryggvason G. J Comput Phys, 1996; 123: 127
[2]
Udaykumar H S, Mao L. Int J Heat Mass Transfer, 2002; 45: 4793
[3]
Udaykumar H S, Marella S, Krishnan S. Int J Heat Mass Transfer, 2003; 46: 2615
[4]
Kobayashi R. Physica, 1993; 63D: 410
[5]
Warren J A, Boettinger W J. Acta Metall Mater, 1992; 43: 689
[6]
Karma A, Rappel W J. Phys Rev, 1996; 53E: R3017
[7]
Liu B C, Jing T. Simulation and Quality Control of Foundry Engineering. Beijing: China Machine Press, 2001: 178 (柳百成,荆 涛．铸造工程的模拟仿真与质量控制北京:机 械工业出版社,2001:178)
[8]
Sasikumar R, Jacob E, George B. Scr Mater, 1998; 38: 693
[9]
Dilthey U, Pavlik V. In: Thomas B G, Beckermann C, eds., Modeling of Casting, Welding and Advanced Solidification Processes VIII, Warrendale PA: TMS, 1998: 589
[10]
Nastac L. Acta Mater, 1999; 47: 4253
[11]
Beltran-Sanchez L, Stefanescu D M. Metall Mater Trans, 2003; 34A: 367
[12]
Jacot A, Rappaz M. Acta Mater, 2002; 50: 1909
[13]
Li Q, Li D Z, Qian B N. Acta Metall Sin, 2004; 40: 634 (李强,李殿中,钱百年．金属学报, 2004;40:634)
[14]
Xie S Y. Vector Analysis and Field Theory. Beijing: Higher Education Press, 1985: 27 (谢树艺．矢量分析与场论．北京:高等教育出版社,1985:27)
[15]
Rider W J, Kothey D B. J Comput Phys, 1998; 141: 112
[16]
Min N B. Physical Fundamentals of Crystal Growth. Shanghai: Shanghai Science and Technology Press, 1982: 230 (闵乃本．晶体生长的物理基础．上海:上海科技出版社,1982: 230)
[17]
Lipton J, Glicksman M E, Kurz W. Mater Sci Eng, 1984; 65: 57
[18]
Glicksman M E, Marsh S P. Handbook of Crystal Growth I, Part B. Amsterdam: North-Holland, 1993: 1078
