|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
冷拔高强00Cr18Ni10N不锈钢丝显微组织与力学性能
, PP. 275-279
Keywords: 不锈钢丝,冷拔,孪生片层,形变孪晶,形变马氏体
Abstract:
对00Cr18Ni10N(质量分数,%)不锈钢丝进行室温拔制,获得了不同面缩率的不锈钢丝。拉伸实验、磁性实验与显微组织观察表明,面缩率小于40%的形变初期阶段,滑移与孪生是主要的变形方式,显微组织含大量孪生片层,亚结构由形变孪晶和位错胞组成,抗拉强度在600---1200MPa范围内变化.面缩率大于40%的大变形阶段,形变马氏体继孪生之后开始参与变形,显微组织是纤维状的条带,亚结构由位错胞与形状不规则、细碎的形变孪晶所组成,抗拉强度在1200MPa以上.
| [1] | Tang G Y, Zhang J, Yan Y J, Zhou H H, FangW. J Mater Process Technol, 2003; 137: 96
|
| [2] | Skolyszewski A, Pa′cko M, Luksza J, Rumi′nski M. J Mater Process Technol, 2002; 125-126: 326
|
| [3] | Christian J W, Mahajan S. Prog Mater Sci, 1995; 39: 1
|
| [4] | Huang C X, Yang G, Gao Y L, Wu S D, Zhang Z F. Mater Sci Eng, 2008; A485: 643
|
| [5] | Topic M, Tait R B, Allen C. Int J Fatigue, 2007; 29: 656
|
| [6] | Goodchild D, Roberts W T, Wilson D V. Acta Metall, 1970; 18: 1137
|
| [7] | Fang X F, Dahl W. Mater Sci Eng, 1991; A141: 189
|
| [8] | Milad M, Zreiba N, Elhalouani F, Baradai C. J Mater Process Technol, 2008; 203: 80
|
| [9] | Nagy E, Mertinger V, Tranta F, S′olyom J. Mater Sci Eng, 2004; A378: 308
|
| [10] | Lebedev A A, Kosarchuk V V. Int J Plast, 2000; 16: 749
|
| [11] | Zhang S L, Li M J, Wang X B, Chen S B. J Chin Soc Corrosi Prot, 2007; 27: 124
|
| [12] | (张述林, 李敏娇, 王晓波, 陈世波. 中国腐蚀与防护学报, 2007; 27: 124)
|
| [13] | Tavares S S M, Fruchart D, Miraglia S. J Alloys Compd, 2000; 307: 311
|
| [14] | Mangonon P L, Thomas G. Metall Trans, 1970; 1: 1587
|
| [15] | Tsakiris V, Edmonds D V. Mater Sci Eng, 1999; A273-275: 430
|
| [16] | Xue Q, Liao X Z, Zhu Y T, Gray III G T. Mater Sci Eng, 2005; A410-411: 252
|
| [17] | Talonen J, H¨anninen H. Acta Mater, 2007; 55: 6108
|
| [18] | Spencer K. PhD Thesis, McMaster University, 2004
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
