|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
对称拉压循环下金属屈服硬化的各向异性与细观变形转动的不均匀性
DOI: 10.3724/SP.J.1037.2011.00110, PP. 1292-1300
Keywords: 循环塑性,晶体滑移,各向异性屈服与硬化,不均匀变形
Abstract:
考虑金属材料晶体细观塑性变形流动的各向异性性质以及晶体滑移的非线性运动硬化,以Voronoi多晶集合体作为材料的代表性单元(RVE),用晶体塑性模型描述金属材料的细观本构关系,对多晶纯Cu进行了晶粒尺度的对称应变循环细观分析.证实了本文模型和方法可以用于描述多晶金属材料不同应变幅的循环滞回特性,并可以用于估计金属材料在循环加载过程中后继屈服面形状和曲率与预加载方向相关的变化.分析发现在对称应变循环中,随循环数增加,多晶材料宏观拉伸方向的内部细观应变分量的统计变异系数(COV)不断增加,材料内部晶格的不均匀细观转动也越来越显著.这些结果表明,循环过程中应变分布差异和晶格转动差异逐渐增大,从而导致材料内部微结构越来越不均匀.
| [1] | Morrison J L M, Shepherd W. Proc Inst Mech Eng, 1950; 163: 1
|
| [2] | Marin J, Hu L W. ASME Trans, 1956; 78: 499
|
| [3] | Marin J, Sauer J A. J Franklin I, 1953; 256: 119
|
| [4] | Yang N S. Acta Mech Sin, 1958; 2: 43
|
| [5] | (杨南生. 力学学报, 1958; 2: 43)
|
| [6] | Frederick C O, Armstrong P J. Mater High Temp, 2007; 24: 1
|
| [7] | Jiang Y, Kurath P. Int J Plast, 1996; 12: 387
|
| [8] | Chaboche J L. Int J Plast, 1986; 2: 149
|
| [9] | Chaboche J L. Int J Plast, 2008; 24: 1642
|
| [10] | Ohno N, Wang J D. Int J Plast, 1993; 9: 375
|
| [11] | Bodner S, Partom Y. J Appl Mech, 1975; 42: 385
|
| [12] | Khan A S, Wang X. Int J Plast, 1993; 9: 889
|
| [13] | Khan A S, Chen P. Int J Plast, 1996; 12: 737
|
| [14] | Khan A S, Kazmi R, Pandey A, Stoughton T. Int J Plast, 2009; 25: 1611
|
| [15] | Khan A S, Pandey A, Stoughton T. Int J Plast, 2010; 26: 1421
|
| [16] | Shi Y K, Zhang K S, Hu G J. Acta Metall Sin, 2009; 45: 1370
|
| [17] | (石艳柯, 张克实, 胡桂娟. 金属学报, 2009; 45: 1370)
|
| [18] | Hu G J, Zhang K S, Shi Y K. Acta Metall Sin, 2010; 46: 466
|
| [19] | (胡桂娟, 张克实, 石艳柯. 金属学报, 2010; 46: 466)
|
| [20] | Su L, Zhang K S, Zhang G, Gao H S. J Mech Strength, 2008; 30: 565
|
| [21] | (苏 莉, 张克实, 张光, 高行山. 机械强度, 2008; 30: 565)
|
| [22] | Taylor G L. J Inst Met, 1938; 62: 307
|
| [23] | Hill R, Rice J R. J Mech Phys Solids, 1972; 20: 401
|
| [24] | Asaro R J, Needleman A. Acta Metall, 1985; 33: 923
|
| [25] | Liang N G, Cheng P S. Acta Mech Sin, 1990; 22: 680
|
| [26] | (梁乃刚, 程品三. 力学学报, 1990; 22: 680)
|
| [27] | Liang N G, Liu H Q, Wang Z Q. Sci China, 1995; 25A: 858
|
| [28] | (梁乃刚, 刘洪秋, 王自强. 中国科学, 1995; 25A: 858)
|
| [29] | Chiang D Y, Beck J L. Int J Solids Struct, 1994; 31: 469
|
| [30] | Chiang D Y, Su K H, Liao C H. Int J Plast, 2002; 18: 51
|
| [31] | Fu Q, Liu F, Zhang J, Liang N G. Acta Mech Sin, 2010; 42: 880
|
| [32] | (付 强, 刘芳, 张晶, 梁乃刚. 力学学报, 2010; 42: 880)
|
| [33] | Zhang K S. Acta Mech Sin, 2004; 36: 714
|
| [34] | (张克实. 力学学报, 2004; 36: 714)
|
| [35] | Zhang K S, Wu M S, Feng R. Int J Plast, 2005; 21: 801
|
| [36] | Hutchinson J W. Proc R Soc London, 1976; 348A: 101
|
| [37] | Kang G Z, Ohno N, Nebu A. Int J Plast, 2003; 19: 1801
|
| [38] | Cailletaud G, Forest S, Jeulin D, Feyel F, Galliet I, Mounoury V, Quilici S. Comput Mater Sci, 2003; 27: 351
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
