OALib Journal期刊
新型无Ni高N奥氏体不锈钢的低温变形行为
DOI: 10.3724/SP.J.1037.2011.00141
Keywords: 高N奥氏体不锈钢 ,冲击韧性 ,力学性能 ,马氏体转变
Abstract:
利用冲击实验、拉伸实验、XRD和TEM对2种不同N含量的无Ni高N奥氏体不锈钢低温变形行为进行了研究.结果表明,高N奥氏体不锈钢在低温下发生明显的韧脆转变和加工硬化现象.在实验材料的Mn含量水平内,提高Mn含量能够改善高N奥氏体不锈钢的低温塑性和韧性,降低其韧脆转变温度.18Cr-12Mn-0.55N钢在低温拉伸变形时会发生形变诱导马氏体相变,但马氏体转变量很少,降低温度对马氏体转变量无明显影响.形变诱导马氏体能提高高N奥氏体不锈钢的加工硬化能力,但降低了钢的低温塑性和韧性.加工硬化能力和层错能随温度的降低而降低是Fe-Cr-Mn高N奥氏体不锈钢在低温下发生脆断的主要原因.
References
[1] Cheng X N, Dai Q X. The Design and Control of Austenitic Stainless Steel. Beijing: National Defense IndustryPress, 2005: 3 [2] (程晓农, 戴起勋. 奥氏体钢设计与控制. 北京: 国防工业出版社, 2005: 3) [3] Mudali U K, Raj B, translated by Li J, Huang Y H. High Nitrogen Steels and Stainless Steels, Manufacturing, Properties and Applications. Beijing: Chemical Industry Press, 2006: 5 [4] (Mudali U K, Raj B著, 李晶, 黄运华 译. 高氮钢和不锈钢--生产、性能与应用. 北京: 化学工业出版社, 2006: 5) [5] Ilola R J, H？nninen H E, Ullakko K M. ISIJ Int, 1996; 36: 873 [6] Tomota Y, Endo S. ISIJ Int, 1990; 30: 656 [7] Gavriljuk V G, Sozinova A L, Foct J, Petrov J N, Polushkin Y A. Acta Mater, 1998; 46: 1157 [8] Milititsky M, Matlock D K, Regully A, Dewispelaere N, Penning J, Hanninen H. Mater Sci Eng, 2008; A496: 189 [9] Tomoto Y, Xia Y, Inoue K. Acta Mater, 1998; 46: 1577 [10] Ishizaka J, Orita K, Terao K. Tetsu Hagan′e, 1992; 78: 1846 [11] Tobler R L, Leyn D. Metall Mater Trans, 1988; 19A: 1626 [12] Ojima M, Adachi Y, Tomota Y, Ikeda K, Katada Y. J Jpn Inst Met, 2009; 73: 283 [13] Milititsky M, Matlock D K, Regully A. Mater Sci Eng, 2008; A496: 189 [14] Saller G, Hahn K S, Scheu C, Clemens H. Mater Sci Eng, 2006; A427: 246 [15] Liu S X, Liu X M, Liu R, Wang C X, Xing F. J Iron Steel Res, 2005; 17: 40 [16] (刘树勋, 刘宪民, 刘蕤, 王春旭, 邢峰. 钢铁研究学报, 2005; 17: 40) [17] Simmons J W. Acta Mater, 1997; 45: 2467 [18] Breedis J, Robertson W. Acta Metall, 1962; 10: 1077 [19] Lee T H, Oh C S, Kim S J. Scr Mater, 2008; 58: 110 [20] Liu S Y, Liu D Y, Liu S C. J Mater Sci, 2007; 42: 7514 [21] Cheng X N, Dai Q X. The Design and Control of Austenitic Stainless Steel. Beijing: National Defense Industry Press, 2005: 28 [22] (程晓农, 戴起勋. 奥氏体钢设计与控制. 北京: 国防工业出版社, 2005: 28) [23] Gavriljuk V G, Berns H. High Nitrogen Steels. Berlin: Springer, 1999: 192 [24] Wang W, Yan W, Yang K, Shan Y Y. J Mater Eng Perform,2010; 19: 1214 [25] Kibey S, Liu J B, Curtis M J, Johnson D D, Sehitoglu H. Acta Mater, 2006; 54: 2991 [26] Hu B F, Jia C C. Acta Metall Sin, 2001; 37: 703 [27] (胡本芙, 贾成厂. 金属学报, 2001; 37: 703) [28] Hübner W, Pyzalla A, Assmus K, Wild E, Wroblewski T. Wear, 2003; 255: 476 [29] Gulyaev A P, Lebedev D V, Gadzhibalaev G A. Met Sci Heat Treat, 1973; 15: 1051 [30] Wang S T. PhD Thesis, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, 2008 [31] (王松涛. 中国科学院金属研究所博士学位论文, 沈阳, 2008) [32] Byun T S, Hashimoto N, Farrell K. Acta Mater, 2004; 52:3889
Full-Text
Contact Us
service@oalib.com
QQ:3279437679
WhatsApp +8615387084133
