|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
预疲劳变形对粗晶纯Al单向拉伸行为的影响
DOI: 10.3724/SP.J.1037.2012.00684, PP. 658-666
Keywords: 粗晶纯Al,预疲劳变形,单向拉伸,断口,位错结构
Abstract:
在恒应力幅下对粗晶纯Al进行不同疲劳寿命分数D(D=2%-75%)的预疲劳变形,研究预疲劳变形对其单向拉伸行为、断口表面变形特征和位错组态的影响.结果表明,随着D的提高,粗晶纯Al的表面挤出和侵入现象加重,晶内的不均匀变形程度增大,导致沿滑移带和晶界萌生微裂纹和微孔洞以及随后的连接,当D高达75%时,三叉晶界节点处产生较长的沿晶裂纹.疲劳位错组态由退火时松散的胞状结构演变成规整的胞状结构和亚晶,但亚晶尺寸并未发生明显变化.预疲劳的粗晶纯Al单向拉伸后,其屈服强度明显提高,但随D的提高,屈服强度变化不大,抗拉强度呈现先降低再升高和最终急剧下降的趋势,但其加工硬化能力较弱.单向拉伸断口由纤维区和剪切唇区组成,纤维区韧窝的数量随D的提高而增多,尺寸减小,当D=50%时,韧窝数量下降,尺寸增大,断口呈现撕裂特征.单向拉伸后的亚结构主要为亚晶和亚内的位错胞状结构,随着D的提高,亚晶先减小后增大,亚晶的细化和亚晶内位错胞状结构的形成使预疲劳后的粗晶纯Al具有较高的最大均匀延伸率.
| [1] | Torres M A S, Voorwald H J C. Int J Fatigue, 2002; 24: 877
|
| [2] | Williams J J, Deng X, Chawla N. Int J Fatigue, 2007; 29: 1978
|
| [3] | Al-Rubaie K S, Del Grande M A, Travessa D N, Cardoso K R. Mater Sci Eng, 2007; A464: 141
|
| [4] | Niendorf T, Lotze C, Canadinc D, Frehn A, Maier H J. Mater Sci Eng, 2009; A499: 518
|
| [5] | Mocilnik V, Gubeljak N, Predan J, Flasker J. Eng Fract Mech, 2010; 77: 3132
|
| [6] | Valiev R Z, Langdon T G. Prog Mater Sci, 2006; 51: 881
|
| [7] | Estrin Y, Vinogradov A. Int J Fatigue, 2010; 32: 898
|
| [8] | Galan Lopez J, Verleysen P, De Baere I, Degrieck J. Procedia Eng,2011; 10: 1961
|
| [9] | Froustey C, Lataillade J L. Mater Sci Eng, 2009; A500: 155
|
| [10] | Sanchez-Santana U, Rubio-Gonzalez C, Mesmacque G, Amrouche A. Int J Fatigue, 2009; 31: 1928
|
| [11] | Sanchez-Santana U, Rubio-Gonz alez C, Mesmacque G, Amrouche A,Decoopman X. Int J Fatigue, 2008; 30: 1708
|
| [12] | Sanchez-Santana U, Rubio-Gonzalez C, Mesmacque G, Amrouche A,Decoopman X. Mater Sci Eng, 2008; A497: 51
|
| [13] | Ye D Y, Xu Y D, Xiao L, Cha H B. Mater Sci Eng, 2010; A527: 4092
|
| [14] | Verleysen P, Vanduyslager P, Van Slycken J, Vermeulen M, Degrieck J. J Phy IV,2006; 134: 1307
|
| [15] | Li X W, Wang X M, Guo W W, Qi C J, Yan Y. Metall Mater Trans, 2013; 44A: 1631
|
| [16] | Xia Y B, Wang Z G. Acta Metall Sin, 1992; 28: A51
|
| [17] | (夏月波, 王中光. 金属学报, 1992; 28: A51)
|
| [18] | Liu G D, Zhu Z G, Wang J. Acta Metall Sin, 1996; 5: 510
|
| [19] | (刘国东, 朱振刚, 王静. 金属学报, 1996; 5: 510)
|
| [20] | Videm M, Ryum N. Mater Sci Eng, 1996; A219: 1
|
| [21] | Giese A, Estrin Y. Scr Metall, 1993; 28: 803
|
| [22] | Fujii T, Sawatari N, Onaka S, Kato M. Mater Sci Eng, 2004; A387--389: 486
|
| [23] | Vorren O, Ryum N. Acta Metall, 1987; 35: 855
|
| [24] | Videm M, Ryum N. Mater Sci Eng, 1996; A219: 11
|
| [25] | Xia Y B, Wang Z G, Ai S H. Acta Metall Sin, 1982; 18: 606
|
| [26] | (夏月波, 王中光, 艾素华. 金属学报, 1982: 18: 606)
|
| [27] | Wang H, Xu Y L, Sun Q Y, Xiao L, Sun J. Acta Metall Sin, 2009; 45: 434
|
| [28] | (王航, 徐燕灵, 孙巧艳, 肖林, 孙军. 金属学报, 2009; 45: 434)
|
| [29] | Li C. Metallography Theory. Harbin: Harbin Industry University Press, 1996: 274
|
| [30] | (李超. 金属学原理. 哈尔滨: 哈尔滨工业大学出版社, 1996: 274)
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
