Jin H P, Li J R, Liu S Z. In: Chandra T, Wanderka N, Reimers W, Ionescu M, eds.,6th Int Conf on Processing and Manufacturing of Advanced Materials,Berlin, Germany: Trans Tech Publications Ltd., 2010: 2251
[3]
Pan D, Xu Q Y, Yu J, Liu B C, Li J R, Yuan H L, Jin H P.Int J Cast Metal Res, 2008; 21: 308
[4]
Liu S Z, Li J R, Tang D Z, Zhong Z G. J Mater Eng, 1999; (7): 40
[5]
(刘世忠, 李嘉荣, 唐定忠, 钟振纲. 材料工程, 1999; (7): 40)
[6]
Reed R C. The Superalloys Fundamentals and Applications. UK: Cambridge University Press, 2006: 121
[7]
Shi C X, Zhong Z Y.Acta Metall Sin, 2010; 46: 1281
[8]
(师昌绪, 仲增墉. 金属学报, 2010; 46: 1281)
[9]
Fu H Z, Guo J J, Liu L, Li J S. Directional Solidification and Processing of Advanced Materials. Beijing: Science Press, 2008: 525
Gandin C A, Rappaz M.Acta Metall Mater, 1994; 42: 2233
[14]
Rappaz M, Gandin C A.Acta Metall Mater, 1993; 41: 345
[15]
Yang X L, Lee P D, D'Souza N.JOM, 2005; 57(5): 40
[16]
Gandin C A, Rappaz M.Acta Mater, 1997; 45: 2187
[17]
Jin H, Li J, Pan D.Acta Metall Sin (Engl Lett), 2009; 22: 429
[18]
Pan D, Xu Q Y, Liu B C.Sci China (Engl Lett), 2011; 54G: 851
[19]
Zhang H, Xu Q Y, Tang N, Pan D, Liu B C.Sci China (Engl Lett), 2011; 54E: 3191
[20]
Liu W W. Rare Met, 2011; 30: 396
[21]
Yang X L, Ness D, Lee P D, D'Souza N.Mater Sci Eng, 2005; A413: 571
[22]
D'Souza N, Ardakani M G, McLean M, Shollock B A. Metall Mater Trans, 2000; 31A: 2877
[23]
Carter P, Cox D C, Gandin C A, Reed R C. Mater Sci Eng, 2000; A280: 233
[24]
Epishin A I, Nolze G. Cryst Rep, 2006; 51: 710
[25]
Pan D, Xu Q Y, Liu B C, Li J R, Yuan H L, Jin H P. JOM, 2010; 62(5): 30
[26]
Pan D. PhD Dissertation, Tsinghua University, Beijing, 2010
[27]
(潘冬. 清华大学博士学位论文, 北京, 2010)
[28]
Seo S M, Kim I S, Lee J H, Jo C Y, Miyahara H, Ogi K. Met Mater Int, 2009; 15: 391
[29]
Zhou Y Z, Volek A, Green N R. Acta Mater, 2008; 56: 2631
[30]
Zhou Y Z, Jin T, Sun X F. Acta Metall Sin, 2010; 11: 1327
[31]
(周亦胄, 金涛, 孙晓峰. 金属学报, 2010; 46: 1327)
[32]
Walton D, Chalmers B. Trans Am Inst Min Metall Eng, 1959; 215: 447
[33]
Jiang L, Li S, Han Y. Proc Eng, 2012; 27: 1135
[34]
Meng X, Lu Q, Li J, Jin T, Sun X, Zhang J, Chen Z, Wang Y, Hu Z.J Mater Sci Technol, 2012; 28: 214
[35]
Liu Z Y, Lin M, Yu D, Zhou X W, Gu Y X, Fu H Z. Metall Mater Trans A, DOI:10.1007/S11661—013—1840—6
[36]
Yu J. PhD Dissertation, Tsinghua University, Beijing, 2007
[37]
(于靖. 清华大学博士学位论文, 北京, 2007)
[38]
Liang Z J. PhD Dissertation, Tsinghua University, Beijing, 2003
[39]
(梁作俭. 清华大学博士学位论文, 北京, 2003)
[40]
Li J R, Zhong Z G, Tang D Z, Liu S Z, Wei P, Wei P Y, Wu Z T, Huang D.In: Pollock T M, Kissinger R D, Bowman R R, Green K A, McLean M, Oison S, Schirra J J,eds., Superalloys 2000, Warrendale, PA: TMS, 2000: 777
[41]
Editorial Committee. Practical Handbook of Engineering Materials.
[42]
2n d Ed., Beijing: China Standards Press, 2002: 771
