Shang C J, Hu L J, Yang S W, Wang X M, Zhao Y T, He X L.Acta Metall Sin, 2005; 41: 471(尚成嘉, 胡良均, 杨善武, 王学敏, 赵运堂, 贺信莱. 金属学报, 2005; 41: 471)
[3]
Liu D S, Cheng B G, Chen Y Y.Acta Metall Sin, 2012; 48: 334(刘东升, 程丙贵, 陈圆圆. 金属学报, 2012; 48: 334)
[4]
Qi J J, Yang W Y, Sun Z Q.Acta Metall Sin, 2002; 38: 629(齐俊杰, 杨王玥, 孙祖庆. 金属学报, 2002; 38: 629)
[5]
Matlock D K, Speer J G. In: Lee H C ed.,The 3rd Int Conf on Advanced Structural Steels,Korea: The Korean Institute of Metals and Materials, 2006: 774
[6]
Mileiko S T, Speer J G.J Mater Sci, 1969; 4: 974
[7]
Speer J G, Matlock D K, Cooman B C, Schroth J G.Acta Mater, 2003; 51: 2661
[8]
Sakuma Y. In: Baker M A ed.,Proc Int Conf on Advanced High Strength Sheet Steels for AutomotiveApplications, Warrendale: Association for Iron－Steel Technology, 2004: 11
[9]
Sugimoto K, Kobayshi M, Hashimoto S Y.Metall Trans, 1992; 23: 2085
[10]
Speer J G, Assuncao F C R, Matlock D K, Edmonds D V.Mater Res, 2005; 8: 417
[11]
Hsu T Y.Mater Sci Forum, 2007; 561: 2283
[12]
Wang X D, Zhong N, Rong Y H, Xu Z Y.J Mater Res, 2009; 24: 261
[13]
Zhang K, Xu W Z, Guo Z H, Rong Y H, Wang M Q, Dong H.Acta Metall Sin, 2011; 47: 489(张柯, 许为宗, 郭正洪, 戎咏华, 王毛球, 董瀚. 金属学报, 2011; 47: 489)
[14]
Zhong N, Wang X D, Wang L, Rong Y H.Mater Sci Eng, 2009; A506: 111
[15]
Chen N L, Rong Y H.Chin Pat, 10562008.9, 2010(陈乃录, 戎咏华. 中国专利, 10562008.9, 2010)
[16]
Zhou S, Zhang L, Chen N L, Gu J F, Rong Y H.ISIJ Int, 2011; 51: 1688
[17]
Liu H P, Lu X W, Jin X J.Mater Des, 2011; 32: 2269
[18]
Wang C L.Metal Fracture Analysis. Harbin: Harbin University Press, 1998: 4(王长利. 金属断口分析. 哈尔滨: 哈尔滨工业大学出版社, 1998: 4)
[19]
Xu Z Y. In: Xue Q J ed.,The Perspective of Chemical Industry, Metallurgy and Materials,Beijing: Chemical Industry Publishing House, 2007: 403(徐祖耀. 见: 薛群基主编, 中国工程院化工、冶金与材料工程学部第六届学术会议特邀报告会议论文集,北京: 化学与工业出版社, 2007: 403)
[20]
Peng Y, Wang A H, Xiao H J, Tian Z L.Acta Metall Sin, 2012; 48: 1281(彭云, 王爱华, 肖红军, 田志凌. 金属学报, 2012; 48: 1281)
[21]
Zhao L, Zhang X D, Chen W Z.Acta Metall Sin, 2005; 41: 392(赵琳, 张旭东, 陈武柱. 金属学报, 2005; 41: 392)
