Sato E, Kuribayashi K. ISIJ Int, 1993; 33: 825 [2] Langdon T G. Met Sci, 1982; 16: 175
[2]
Lian J, Suery M. Mater Sci Technol, 1986; 2: 1093
[3]
Lin Z R. The Principle and Application of Metal Superplastic Formation.Beijing: The Aviation Industury Press, 1990: 24
[4]
(林兆荣. 金属超塑性成形原理及应用. 北京: 航空工业出版社, 1990: 24)
[5]
Ghandi C, Ghosh A K. In: Lee E W, Chia E H, Kim N J eds.,Light Weight Alloys of Aerospace Applications. Warrendale:The Minerals and Materials Society, 1989: 419
[6]
Lombard C M, Ghosh A K, Semiatin S L. Metall Mater Trans, 2001; 32A: 2769
[7]
Zaki M, Suery M. Proc Current Advances in Mechanical Design and Production: 5th MDP Conference, Cairo: University Egypt, 1991: 467
[8]
Kaibyshev R, Sakai T. Scr Mater, 2001; 45: 1373
[9]
Chokshi A H, Langdon T G. Acta Metall, 1989; 37: 715
[10]
Jiang X G, Earthman J C. J Mater Sci, 1994; 29: 5499
[11]
Gouthama, Padmanabhan K A. Scr Mater, 2003; 49: 761
[12]
Raj R, Ashby M F. Metall Trans, 1971; 2: 1113
[13]
Shei S A, Longdon T G. J Mater Sci, 1978; 13: 1084
[14]
Ghosh A K. In: Hamilton C H, Paton N E eds., Superplastic Forming of Structure Alloys. Warrendale: Metall Soc of AIME, 1982: 85
[15]
Ma Y, Langdon T G. In: Hamilton C H, Paton N E eds.,Superplasticity and Superplastic Forming.Warrendale: The Minerals and Materials Society, 1988: 173
[16]
Chokshi A H, Langdon T G. Acta Metall, 1987; 35: 1089
[17]
Furushiro N, Langdon T G. In: Hamilton C H, Paton N E eds., Superplasticity and Superplastic Forming. Warrendale: The Minerals and Materials Society, 1988: 197
[18]
Stowell M J. In: Hamilton C H, Paton N E eds., Superplastic Forming of Structure Alloys. Warrendale:Metall Soc of AIME, 1982: 321
[19]
Stowell M J. Met Sci, 1983; 17: 92
[20]
Stowell M J, Livesey D W. Acta Metall, 1984; 32: 35
[21]
Needleman A, Rice J R. Acta Metall, 1980; 28: 1315
[22]
Cocks A C, Ashby M F. Met Sci, 1980; 14: 395
[23]
Mandelbrot B B. The Fractal Geometry of Nature. New York: Freeman, 1983: 1
[24]
Mandelbrot B B, Passoja D E, Paullay A L. Nature, 1984; 308: 721
[25]
Jiang X G, Chu W Y, Hsiao C M. Acta Metall Mater, 1994; 42: 105
[26]
Jiang X G, Cui J Z, Ma L X. Acta Metall Mater, 1992; 40: 1267
[27]
Kaibyshev A, Pshenichnyuk A I. Acta Mater, 1998; 46: 4911
[28]
Kaibyshev A, Pshenichnyuk A I. Mater Sci Eng, 2005; A410--411: 105
[29]
Consid$\grave{\rm e$re A. Annales Ponts Chauss$\acute{e$es, 1885; 9: 574
[30]
Backofen W A, Turner I R, Avery D H. Trans ASM Quart, 1964; 57: 980
[31]
Avery D H, Stuart J M. In: Burke J J, Weiss V eds., Surface and Interfaces II. New York: Syracuse University Press, 1968: 371
[32]
Morrison W B. Trans Metall Soc AIME, 1968; 242: 2221
[33]
Holt D L. In: Burke J J, Weiss V eds.,Ultrafine Grain Metals. New York: Syracuse University Press, 1970: 355
[34]
Matsuo M, translated by Kang D C. Superplasticity and Technology of Metal Forming. Beijing: China Machine Press, 1985: 36
Liu C. Superplasticity of Metal. Shanghai: Shanghai Jiao Tong University Press, 1989: 102
[42]
(刘勤, 金属的超塑性. 上海: 上海交通大学出版社, 1989: 102)
[43]
Liu C. Metall Trans, 1986; 17A: 674
[44]
Song Y Q, Gao B E, Wang X W. Sci China, 1998; 28E: 193
[45]
(宋玉泉, 高柏恩, 王习文. 中国科学, 1998; 28E: 193)
[46]
Hart E W. Acta Metall, 1967; 15: 351
[47]
Campbell D. J Mech Phys Solids, 1967; 15: 359
[48]
Jonas J J, Christodoulou N. Scr Metall, 1978; 12: 393
[49]
Jonas J J, Christodoulou N. Scr Metall, 1978; 12: 565
[50]
Song Y Q, Liu S M, Hou L. Chin Sci Bull, 2002; 47: 717
[51]
(宋玉泉, 刘术梅, 侯磊. 科学通报, 2002; 47: 717)
[52]
Hasegawa T, Okazaki K. Mater Sci Eng, 2001; A297: 266
[53]
Kim W J, Lee B H. Mater Sci Eng, 2010; A527: 5984
[54]
Samantaray D, Mandal S, Bhaduri A K. Mater Des, 2011; 32: 716
[55]
Song Y Q, Suo Z L, Guan Z P, Liu Y. Acta Metall Sin, 2006; 42: 337
[56]
(宋玉泉, 索忠林, 管志平, 刘颖. 金属学报, 2006; 42: 337)
[57]
Song Y Q. Chin J Mech Eng, 2003; 39: 64
[58]
(宋玉泉. 机械工程学报, 2003; 39: 64)
[59]
Ghosh A K. Acta Metall, 1977; 25: 1413
[60]
Kocks U F, Jonas J J, Mecking H. Acta Metall, 1979; 27: 419
[61]
Lin I H, Hirth J P, Hart E W. Acta Metall, 1981; 29: 819
[62]
Lian J S. Chin J Mech Eng, 1982; 18: 21
[63]
(连建设. 机械工程学报, 1982; 18: 21)
[64]
Semiatin S L, Jonas J J. Formability and Workability of Metals: Plastic Instability and Flow Localization. Metals Park, Ohio: ASM, 1984: 155
[65]
Ghosh A K, Ayres R. Metall Mater Trans, 1976; 7A: 1589
[66]
Hutchinson W, Neale K W. Acta Metall, 1977; 25: 839
[67]
Lian J S, Baudelet B. Met Sci Technol, 1990; 9: 83
[68]
(连建设, Baudelet B. 金属科学与工艺, 1990; 9: 83)
[69]
Miles M P, Daehn G S, Wagoner R H. Metall Mater Trans, 2003; 34A: 2559
[70]
Manonukul, Dunne F P. Key Eng Mater, 1996; 118--119: 123
[71]
Dunne F P. Int J Plasticity, 1998; 14: 413
[72]
Dunne F P, Kim T. Proc R Soc Lond, 1999; 455A: 719
[73]
Wu Y Q, Zhang K S. Acta Mech Solida Sin, 2003; 24: 313
[74]
Rice J R. Acta Metall, 1981; 29: 675
[75]
Wilkinson D S, Caceres C H. Mater Sci Technol, 1986; 2: 1086
[76]
Cocks A C, Ashby M F. Prog Mater Sci, 1982; 27: 189
[77]
Hamilton C H, Bampton C C, Paton N E. In: Hamilton C H,Paton N E eds., Superplastic Forming of Structure Alloys.Warrendale: Metall Soc of AIME, 1982: 173
[78]
Ragab A R. Mater Sci Eng, 2007; A454--455: 614
[79]
Thomason P F. Ductile Fracture of Metals. Oxford: Pergamon Press, 1990: 1
[80]
Ragab A R. Acta Mater, 2004; 52: 3997
[81]
Chen I W, Xue L A. J Am Ceram Soc, 1990; 73: 2585
[82]
Kim W J, Wolfenstine J, Sherby O D. Acta Metall Mater, 1991; 39: 199
[83]
Rybacki E, Wirth R, Dresen G. J Geophys Res--Solid Earth, 2010; 115: B08209
[84]
Giroux P F, Dalle F, Sauzay M, Malaplate J, Fournier B, Gourgues--Lorenzon A F. Mater Sci Eng, 2010; A527: 3984
[85]
Duncombe E. Int J Solids Struct, 1974; 10: 1445
[86]
Marciniak Z, Kuczynski K. Int J Mech Sci, 1967; 9: 609
[87]
Lian J S, Zhang J R. Acta Metall Sin, 1985; 21: 88
[88]
(连建设, 张吉人. 金属学报, 1985; 21: 88)
[89]
Lian J, Baudelet B. Mater Sci Eng, 1986; 84: 157
[90]
Song Y Q, Guan Z P, Wang M H, Song J W. Sci China, 2007; 37E: 80
[91]
(宋玉泉, 管志平, 王明辉, 宋家旺. 中国科学, 2007; 37E: 80)
[92]
Zhang J R, Lian J S. Met Sci Technol, 1984; 3: 17
[93]
(张吉人, 连建设. 金属科学与工艺, 1984; 3: 17)
[94]
Hamilton C H. Metall Trans, 1989; 20A: 2783
[95]
Kannan K, Hamilton C H. Scr Mater, 1997; 37: 455
[96]
Kannan K, Hamilton C H. Acta Mater, 1998; 46: 5533
[97]
Burke M A, Nix W D. Acta Metall, 1975: 23: 793
[98]
Semiatin S L, Ghosh A K, Jonas J J. Metall Trans, 1985; 16A: 2291
[99]
Schuh C, Dunand D C. J Mater Res, 2001; 16: 865
[100]
(吴艳青, 张克实. 固体力学学报, 2003; 24: 313)
[101]
Takuji O, Tomei H. Trans Iron Steel Inst Jpn, 1986; 72: S1624
[102]
(岡部卓治,畑山東明.日本鐡鋼協會々誌,1986;72:S1624)
[103]
Lian J, Baudelet B. Scr Metall, 1987; 21: 331
[104]
Song Y Q, Cheng Y C, Liu Y. Sci China, 2000; 30E: 200
[105]
(宋玉泉, 程永春, 刘颖. 中国科学, 2000; 30E: 200)
[106]
Song Y Q, Hai J T, Guan Z P. Sci China, 2001; 31E: 103
[107]
(宋玉泉, 海锦涛, 管志平. 中国科学, 2001; 31E: 103)
[108]
Song Y Q, Cheng Y C, Wang X W. Chin J Mech Eng, 2000; 36: 33
[109]
(宋玉泉, 程永春, 王习文. 机械工程学报, 2000; 36: 33)
[110]
Song Y Q, Cheng Y C, Liu S M. Chin J Mech Eng, 2001; 37: 5
