|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
基于固有耗散的FV520B钢高周疲劳性能研究
DOI: 10.11900/0412.1961.2014.00546, PP. 400-406
Keywords: FV520B钢,固有耗散,高周疲劳,微结构运动
Abstract:
基于固有耗散理论和计算模型,对FV520B钢的高周疲劳性能进行了较为系统的实验研究.结果表明,随着施加的交变应力幅的增大,FV520B钢的固有耗散也不断增大.其变化规律的拐点对应于固有耗散产生机制的转变,从单纯地由材料微结构的可逆运动(位错线在强钉扎点之间的摆动)引起,到由材料微结构的可逆运动和不可逆运动(永久滑移的产生、强钉扎点的脱钉以及位错的增殖)共同引起.并且,固有耗散拐点的应力幅值就是导致材料疲劳损伤累积的临界应力幅值,即疲劳极限.另外,实验还表明,FV520B钢在等幅交变应力下具有相对稳定的损伤演化速率,且损伤演化速率由应力幅值决定,与加载次序无关;每一周加载造成的疲劳损伤也不受加载频率的影响.当FV520B钢在疲劳过程中累积的与微结构不可逆演化相关的固有耗散部分达到一个临界值时,材料即发生疲劳断裂,且这个临界值是一个与加载历史无关的材料常数.
| [1] | Zhou Q Q, Zhai Y C. Acta Metall Sin, 2009; 45: 1249 (周倩青, 翟玉春. 金属学报, 2009; 45: 1249)
|
| [2] | Niu J, Dong J M, Xue J. Chin J Mech Eng, 2007; 43(12): 78 (牛 靖, 董俊明, 薛 锦. 机械工程学报, 2007; 43(12): 78)
|
| [3] | Niu J, Dong J M, Xue J, Zhang M. Trans China Weld Inst, 2006; 27: 101 (牛 靖, 董俊明, 薛 锦, 张 敏. 焊接学报, 2006; 27: 101)
|
| [4] | Fan J L, Guo X L, Wu C W, Deng D W. Chin J Mater Res, 2012; 33: 76 (樊俊铃, 郭杏林, 吴承伟, 邓德伟. 材料研究学报, 2012; 33: 76)
|
| [5] | Fan J L, Guo X L, Wu C W. Int J Fatigue, 2012; 44: 1
|
| [6] | Fan J L, Guo X L, Zhao Y G, Wu C W. Mater Eng, 2011; (12): 29 (樊俊铃, 郭杏林, 赵延广, 吴承伟. 材料工程, 2011; (12): 29)
|
| [7] | Lemaitre J, Chaboche J L. Mechanics of Solid Materials. Cambridge: University Press, 1990: 37
|
| [8] | Wang H G. An Introduction to Thermoelasticity. Beijing: Tsinghua University Press, 1989: 38 (王洪纲. 热弹性力学概论. 北京: 清华大学出版社, 1989: 38)
|
| [9] | Fan J L, Guo X L, Wu C W, Zhao Y G. Mater Sci Eng, 2011; A528: 8417
|
| [10] | Fan J L, Guo X L, Wu C W. Mater Eng, 2013; (7): 1 (樊俊铃, 郭杏林, 吴承伟. 材料工程, 2013; (7): 1)
|
| [11] | Risitano A, Risitano G. Int J Fatigue, 2013; 48: 214
|
| [12] | Fargione G, Geraci A, La Rosa G, Risitano A. Int J Fatigue, 2002; 24: 11
|
| [13] | Boulanger T, Chrysochoos A, Mabru C, Galtier A. Int J Fatigue, 2004; 26: 221
|
| [14] | Berthel B, Chrysochoos A, Wattrisse B, Galtier A. Exp Mech, 2007; 48: 79
|
| [15] | Giancane S, Chrysochoos A, Dattoma V, Wattrisse B. Theor Appl Fract Mec, 2009; 52: 117
|
| [16] | Connesson N, Maquin F, Pierron F. Acta Mater, 2011; 59: 4100
|
| [17] | Connesson N, Maquin F, Pierron F. Exp Mech, 2010; 51: 23
|
| [18] | Meneghetti G, Ricotta M. Eng Fract Mech, 2012; 81: 2
|
| [19] | Meneghetti G, Quaresimin M. Composites, 2011; 42B: 217
|
| [20] | Meneghetti G. Int J Fatigue, 2007; 29: 81
|
| [21] | Maquin F, Pierron F. Mech Mater, 2009; 41: 928
|
| [22] | Tong X Y, Wang D J, Xu H. Acta Metall Sin, 1992; 28: 163 (童小燕, 王德俊, 徐 灏. 金属学报, 1992; 28: 163)
|
| [23] | Tong X Y, Wang D J, Xu H. Acta Metall Sin, 1991; 27: 149 (童小燕, 王德俊, 徐 灏. 金属学报, 1991; 27: 149)
|
| [24] | Yao L J, Li B, Tong X Y. J Northwestern Polytechnical Univ, 2008; 26: 225 (姚磊江, 李 斌, 童小燕. 西北工业大学学报, 2008; 26: 225)
|
| [25] | Zeng W, Han X, Ding H, Liu H. J Mech Strength, 2008; 30: 658 (曾 伟, 韩 旭,丁 桦, 刘 浩. 机械强度, 2008; 30: 658)
|
| [26] | Li Y, Han X, Liu J, Jiang C. Acta Mechanica Sin, 2013; 45: 367 (李 源, 韩 旭, 刘 杰, 姜 潮. 力学学报, 2013; 45: 367)
|
| [27] | Zhang H X, Wu G H, Yan Z F, Guo S F, Chen P D, Wang W X. Mater Des, 2014; 55: 785
|
| [28] | Liu X Q, Zhang H Q, Yan Z F, Wang W X, Zhou Y G, Zhang Q M. Theor Appl Fract Mech, 2013; 67: 46
|
| [29] | Guo Q, Guo X L, Fan J L, Hou P J, Wu C W. Acta Mechanica Sin, 2014; 46: 931 (郭 强, 郭杏林, 樊俊铃, 侯培军, 吴承伟. 力学学报, 2014; 46: 931)
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
