符 杨,吴 靖,魏书荣. 大型海上风电场集电系统拓扑结构优化与规划[J]. 电网技术,2013,37(9)：2554-2558. FU Yang, WU Jing, WEI Shurong. Topology optimization and planning of power collection system for large-scale offshore wind farm[J]. Power System Technology, 2013, 37(9): 2554-2558.
[2]
Worzky T. Submarine power cables: design, installation, repair, environmental aspects[M]. Beijing, China: China Machine Press, 2011: 3-4.
[3]
Stolan R. Losses and inductive parameters in subsea power cables[D]. Trondheim, Norway: Norwegian University of Science and Technology, 2009: 3-4.
[4]
杜伯学,李忠磊,张 锴,等. 220 kV交联聚乙烯电力电缆接地电流的计算与应用[J]. 高电压技术,2013,39(5)：1034-1039. DU Boxue, LI Zhonglei, ZHANG Kai, et al . Calculation and application of 220 kV cross linked polyethylene power cable grounding current[J]. High Voltage Engineering, 2013, 39(5): 1034-1039.
[5]
高俊国,于平澜,李紫云,等. 基于有限元法的电缆金属护套感应电压仿真分析[J]. 高电压技术,2014,40(3)：714-720. GAO Junguo, YU Pinglan, LI Ziyun, et al . Simulation analysis of induced voltage on metal sheath of power cable based on finite element method[J]. High Voltage Engineering, 2014, 40(3): 714-720.
[6]
GB 50217—2007 电力工程电缆设计规范[S],2007：18. GB 50217—2007 Code for design of cables of electric engineering[S], 2007: 18.
[7]
张全胜,王和亮,周作春. 110 kV XLPE电缆金属护套交叉互联接地探讨[J]. 高电压技术,2005,31(11)：71-73. ZHANG Quansheng, WANG Heliang, ZHOU Zuochun. Study on cross connection grounding of metallic sheath of 110 kV XLPE power cable[J]. High Voltage Engineering, 2005, 31(11): 71-73.
[8]
Gouda O E, Farag A A. Factors affecting the sheath losses in single-core underground power cables with two-points bonding method[J]. International Journal of Electrical and Computer Engineering(IJECE), 2012, 2(1): 12-15.
[9]
刘 刚,雷 鸣,阮班义,等. 考虑轴向传热的单芯电缆线芯温度实时计算模型研究[J]. 高电压技术,2012,38(8)：1877-1883. LIU Gang, LEI Ming, RUAN Banyi, et al . Model research of real-time calculation for single-core cable temperature considering axial heat transfer[J]. High Voltage Engineering, 2012, 38(8): 1877-1883.
[10]
雷成华,刘 刚,阮班义,等. 根据导体温升特性实现高压单芯电缆动态增容的实验研究[J]. 高电压技术,2012,38(6)：1397-1402. LEI Chenghua, LIU Gang, RUAN Banyi, et al . Experimental research of dynamic capacity based on conductor temperature-rise characteristic of HV single-core cable[J]. High Voltage Engineering, 2012, 38(6): 1397-1402.
[11]
梁永春,李彦明,李延沐,等. 地下电缆群暂态温度场和短时载流量数值计算方法[J]. 电工技术学报,2009,24(8)：39-40. LIANG Yongchun, LI Yanming, LI Yanmu, et al . Numerical method to calculate the transient temperature field and short-term ampacity of underground cable system[J]. Transactions of China Electrotechnical Society, 2009, 24(8): 39-40.
[12]
梁永春,王巧玲,闫彩红,等. 三维有限元法在局部穿管直埋电缆温度场和载流量计算中的应用[J]. 高电压技术,2011,37(12)：2911-2917. LIANG Yongchun, WANG Qiaoling, YAN Caihong, et al . Temperature field and ampacity calculation of cable buried in local conduit using 3D finite element method[J]. High Voltage Engineering, 2011, 37(12): 2911-2917.
[13]
邓长胜,周汉亮. 磁性不锈钢编织铠装损耗的实验研究[J]. 电线电缆,2005(2)：22. DENG Changsheng, ZHOU Hanliang. Experimental study on the loss of the armor consisting of magnetic stainless stell braid[J]. Electric Wire & Cable, 2005(2): 22.
[14]
Thue W A. Electric power cable engineering[M]. New York, USA: Marcel Dekker, 2005: 327-328.
[15]
Wang X H, Song Y H, Jung C K. Tackling sheath problems: Latest research developments in solving operational sheath problems in underground power transmission cables[J]. Electric Power Systems Research, 2007(77): 1449-1457.
[16]
孙廷玺,崔江静,郑柒拾,等. 高压电缆金属套接地电流抑制技术的研究[C]∥全国第九次电力电缆运行经验交流会议论文集. 上海: [出版者不详],2012：665-667. SUN Tingxi, CUI Jiangjing, ZHENG Qishi, et al . Research of suppression technique of metal sheath’s ground current of high-voltage cable[C]//Proceedings of National Ninth Exchange Conference of Power Cables Operating Experience. Shanghai, China: [s.n.], 2012: 665-667.
[17]
IEC 60287-1-1:1994 Calculation of the current rating of electric cables, part 1: current rating equations (100% load factor) and calculation of losses, section 1: general[S], 1994.
[18]
IEC 60287-1-2:1994 Calculation of the current rating of electric cables, part 1: current rating equations (100% load factor) and calculation of losses, section 2: sheath eddy current loss factor for two circuits in flat formation[S], 1994.
[19]
IEC 60287-2-1:1994 Calculation of the current rating of electric cables, part 2: thermal resistance, section 1: calculation of thermal resistance[S], 1994.
[20]
刘子玉,王惠明. 电力电缆结构设计原理[M]. 西安：西安交通大学出版社,1995：99-101. LIU Ziyu, WANG Huiming. Structural design principle of power cable[M]. Xi’an, China: Xi’an Jiaotong University Press, 1995: 99-101.
[21]
冯德旺,任锦彪. 矿用铠装电缆金属护套的屏蔽作用分析[J]. 中国安全科学学报,2010,20(8)：107-108. FENG Dewang, REN Jinbiao. Analysis on the screening effect of armored cable’s metal sheath[J]. China Safety Science Journal, 2010, 20(8): 107-108.
[22]
纳萨尔S.A. 电机与机电学[M]. 北京：科学出版社,2002：4-5. Nassar S A. Electric machines and electromechanlcs[M]. Beijing, China: Science Press, 2002: 4-5.
[23]
聂永峰,王建辉,孟 毓. 输电电缆支架涡流损耗的计算与分析[J]. 电网技术,2008,32(增刊1)：142-143. NIE Yongfeng, WANG Jianhui, MENG Yu. Calculation and analysis of eddy current losses in girder frame for transmission cable[J]. Power System Technology, 2008, 32(Supplement 1): 142-143.
[24]
梁永春,赵 静,闫彩红. 沟槽电缆温度场和载流量的数值计算[J]. 高电压技术,2012,38(11)：3048-3049. LIANG Yongchun, ZHAO Jing, YAN Caihong. Numerical calculation of temperature field and ampacity of power cables in channel[J]. High Voltage Engineering, 2012, 38(11): 3048-3049.
