陈庆国,秦艳军,尚南强,等. 温度对高压直流电缆中间接头内电场分布的影响分析[J]. 高电压技术,2014,40(9)：2619-2626. CHEN Qingguo, QIN Yanjun, SHANG Nanqiang, et al . Influence analysis of temperature on electric-field distribution in HVDC cable joint[J]. High Voltage Engineering, 2014, 40 (9): 2619-2626.
陈铮铮,赵健康,欧阳本红,等. 直流与交流交联聚乙烯电缆料绝缘特性的差异及其机理分析[J]. 高电压技术,2014,40(9)：2644-2652. CHEN Zhengzheng, ZHAO Jiankang, OUYANG Benhong, et al . Difference in insulation characteristics and mechanism between AC and DC XLPE cable’s material[J]. High Voltage Engineering, 2014, 40(9): 2644-2652.
[4]
Mazzanti G, Marzinotto M. Extruded cables for high-voltage direct-current transmission: advances in research and development, chapter 5: improved design of HVDC extruded cable systems[M]. 1st ed. NewJersey, USA: John Wiley &Sons Incorporated, 2013: 209-256.
[5]
周远翔,赵健康,刘 睿,等. 高压/超高压电力电缆关键技术分析及展望[J]. 高电压技术,2014,40(9)：2593-2612. ZHOU Yuanxiang, ZHAO Jiankang, LIU Rui, et al . Key technical analysis and prospect of high voltage and extra-high voltage power cable[J]. High Voltage Engineering, 2014, 40(9): 2593-2612.
[6]
Ross R. Dealing with interface problems in polymer cable terminations[J]. IEEE Electrical Insulation Magazine, 1999, 14(4): 5-9.
[7]
夏云杰,钟海杰,王锦明,等. 交联聚乙烯绝缘电缆主体终端模注应力控制模块：中国,ZL. 2013. 2 0549923.3[P]. 2014-03-05. XIA Yunjie, ZHONG Haijie, WANG Jinming, et al . The injection molding stress controller for XLPE cable termination: China, ZL. 2013. 2 0549923.3[P]. 2014-03-05.
[8]
Rogti F, Mekhaldi A, Laurent C. Space charge behavior at physical interfaces in cross-linked polyethylene under DC field[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2008, 15(5): 1478-1485.
[9]
Delpino S, Fabiani D, Montanari G C, et al. Polymeric HVDC cable design and space charge accumulation, part 2: insulation interfaces[J]. IEEE Electrical Insulation Magazine, 2008, 24(1): 14-22.
[10]
顾 金,王俏华,伊 毅,等. 高压直流XLPE电力电缆预制式接头的设计[J]. 高电压技术,2009,35(12)：3159-3163. GU Jin, WANG Qiaohua, YIN Yi, et al . Design of prefabricated joints for HVDC power cables[J]. High Voltage Engineering, 2009, 35(12): 3159-3163.
[11]
钟琼霞,兰 莉,吴建东,等. 不同表面处理剂对纳米MgO/LDPE空间电荷行为的影响[J]. 高电压技术,2014,40(9)：2668-2677. ZHONG Qiongxia, LAN Li, WU Jiandong, et al . Effect of different surface treatments on space charge behavior in nano-MgO/LDPE[J]. High Voltage Engineering, 2014, 40(9): 2668-2677.
[12]
吕 亮,王 霞,何华琴,等. 硅橡胶/三元乙丙橡胶界面上空间电荷的形成[J]. 中国电机工程学报,2007,27(15)：106-109. LÜLiang, WANG Xia, HE Huaqin, et al. Formation of space charges at interface between ethylene propylene diene terpolymer and silicone rubber[J]. Proceedings of the CSEE, 2007, 27(15): 106-109.
[13]
Marc J. HVDC, the next generation of transmission highlights with focus on extruded cable systems[C]∥Proceedings of 2008 International Symposium on Electrical Insulating Materials. Yokkaichi, Japan: [s.n.], 2008: 10-15.
[14]
CIGRE WG21-01 Recommendations for testing DC extruded cable systems for power transmission at a rated voltage up to 500 kV[S], 2012.
[15]
应启良,王佩龙. 城网地下输电系统用高压电缆附件的发展[J]. 电线电缆,1997,50(4)：8-12. YING Qiliang, WANG Peilong. Development of HV cable accessories for underground transmission system in urban area[J]. Electric Wire 𦲫le, 1997, 50(4): 8-12.
[16]
王佩龙,李凤兰. 电缆附件的稳态热性计算[J]. 电线电缆,1980,33(6)：23-26. WANG Peilong, LI Fenglan. Steady-state thermal calculations of cable accessories[J]. Electric Wire 𦲫le, 1980, 33(6): 23-26.
