全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

建立数学模型分析UV-Fenton对金属切削液废水的降解

Keywords: 数学模型,金属切削液,UV/Fenton,COD去除率

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用UV/Fenton技术处理金属切削液废水,并通过正交实验和单因素实验得到了最佳工作条件为:pH=2.5,H2O2(浓度30%)投加量=127.5mL/L,Fe2+投加量=24.8mmol/L,总反应时间=3h,投加次数6次,此条件下金属切削液废水COD去除率达到95%。最后,通过正交实验数据和单因素模型方程利用1stOpt进行多元非线性拟合建立UV/Fenton对金属切削液废水COD降解率的数学模型方程,然后进行分析讨论。

References

[1]  谢银德;陈锋;何健军.Photo-Fenton反应研究进展[J].感光可与与光化学,2000(4)doi:10.3969/j.issn.1674-0475.2000.04.010
[2]  姜兴业;梁路江,正交试验优化设计在确定最佳生产条件中的应用,现代引信,1995(1).
[3]  方开泰;马长兴,正交与均值试验设计,北京:科学出版社,2001.
[4]  Nidal Hilal ;Gerald Busca ;Fernando Rozada ;Nick Hankins,Use of activated carbon to polish effluent from metalworking treatment plant:comparison of different streams,Desalination?,2005, 185(1/3).
[5]  Christina Cheng ;David Phipps ;Rafid M. Alkhaddar,Treatment of spent metalworking fluids,Water Research?,2005, 39(17).
[6]  Portela J. R;Sanchez-Oneto J;Nebot E,Hydro- thermal oxidation of oily wastes:An alternative to conven- tional treatment methods,Chemical Engineering and Tech- nology,2003(2).
[7]  王西峰,胡晓莲.uV-Fenton试剂处理皂素生产废水试验研究[J].中国给水排水,2008(13)
[8]  唐春然;许中坚;唐国丰.H:0:引发的UV/Fenton苯酚光催化降解[J].中国环境科学,2009(7)

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133