Duan J,Gregory J,Coagulation by hydrolyzingmetal salts,Advances in Colloid and Interface Science,2003.
[2]
Korbahtia B.K,Rauf M.A,Determination of optimum operating conditions of carmine decoloration by UV/H2O2 using response surface methodology,Journal of Hazardous Materials,2009(1).
[3]
Korbahti B.K,Aktas N,Tanyolac A,Optimization of electrochemical treatment of industrial paint wastewater with response surface methodology,Journal of Hazardous Materials,2007(1-2).
[4]
Wang D.S,Tang H.X,Modified inorganic polymer floc-culant-PFSi; Its preparation,characterization and coagulation behavior,Water Research,2001(14).
[5]
Rizzo L,Gennaro A.D,Gallo M,Coagulation/ chlorination of surface water:A comparison between chi-tosan and metal salts,Separation and Purification Technology,2008(1).
[6]
Baskan MB,Pala A,Determination of arsenic removal efficiency by ferric ions using response surface methodology,Journal of Hazardous Materials,2009(2-3).
[7]
吴彦瑜,陈文纳,含锌多核聚铝絮凝剂的制备及形态特征,环境工程学报,2008(6).
[8]
Xiao F,Yi P,Pan X.R,Comparative study of the effects of experimental variables on growth rates of aluminum and iron hydroxide floes during coagulation and their structural characteristics,Desalination,2010(3).
[9]
Hempoonsert J,Tansel B,Laha S,Effect of temperature and pH on droplet aggregation and phase separation characteristics of flocs formed in oil-water emulsions after coagulation,Colloids and Surfaces A:Physicochemical and Engineering Aspects,2010(1).
[10]
Lin J.L,Huang C,Pan J.R,Effect of Al(Ⅲ) speciation on coagulation of highly turbid water,Chemo-sphere,2008(2).
Olmez T,The optimization of Cr (Ⅵ) reduction and removal by electrocoagulation using response surface methodology,Journal of Hazardous Materials,2009(2-3).
[15]
Catalkaya E.C,Kargi F,Advanced oxidation and mineralization of simazine using Fenton\' s reagent,Journal of Hazardous Materials,2009(2 -3).
[16]
Mason R.L,Gunst R.F,Hess J.L,Statistical Design and Analysis of Experiments,New york:Wiley,2003.
[17]
Box G,Hunter W.G,Statistics for Experiments:An Introduction to Design.Data Analysis and Model Building,New York; Wiley Interscience,1987.
[18]
Khun A.I,Cornell J.A,Response Surfaces,Design and Analyses,New York,USA:Marcel Dekker,Inc,1996.
[19]
Ghafari S,Aziz H.A,Hasnain Isa,Application of response surface methodology (RSM) to optimize coag-ulation-flocculation treatment of leachate using poly-alumi-num chloride (PAC) and alum,Journal of Hazardous Materials,2009(2-3).
[20]
Wang J.P,Chen Y.Z,Ge X.W,Optimization of coagulation-flocculation process for a paper-recycling wastewater treatment using response surface methodology,Colloids and Surfaces A:Physicochemical and Engineering Aspects,2007(1 -3).
[21]
Moghaddam S.S,Moghaddam M.R.A,Arami M,Co-agulation/flocculation process for dye removal using sludge from water treatment plant; Optimization through response surface methodology,Journal of Hazardous Materials,2010(1 -3).
[22]
Colin X,Farinet J.L,Rojas O,Anaerobic treatment of cassava starch extraction wastewater using a horizontal flow filter with bamboo as support,Bioresource Technology,2007(8).
[23]
Rojas O,Torres P,Alazard D,Cassava starch extraction:A typical rural agroindustry with a high contamination potential,CIAT Publication,1996.
[24]
Tung T.Q,Miyata N,Iwahori K,Growth of Aspergillus oryzae during treatment of cassava starch processing wastewater with high content of suspended solids,Journal of Bioscience and Bioengineering,2004(5).
