全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

加压条件下气力轮式精密排种器性能分

, PP. 72-77

Keywords: 排种器,性能,加压条件,均匀设计,数学模型

Full-Text   Cite this paper   Add to My Lib

Abstract:

针对研制的气力轮式精密排种器,采用均匀设计法设计试验,运用均匀设计软件UST1.0建立了大豆排种性能指标数学模型,分析气力条件下排种器设计参数对排种性能的影响规律。分析表明:气力条件下,排种性能指标主要受气压和作业速度影响,气压范围为1.4~1.8kPa时粒距合格率达到85%以上,满足8?km/h速度以上大豆精密播种;充种角和清种角变化对排种性能影响不显著,充种角和清种角优化区域与常压条件下排种试验优化结果一致:充种角为46.35°、清种角为55°;气流方向对排种性能没有显著影响。

References

[1]  孙裕晶.马成林.张勇智 基于均匀设计的精密排种器结构优化方法 [J].-吉林大学学报(工学版)2004(4)
[2]  孙裕晶.马成林.王海 气力轮式精密排种器大豆充种过程试验研究 [J].-农机化研究2006(10)
[3]  杨松华.孙裕晶.马成林.赵慧玲 气力轮式精密排种器参数优化 [J].-农业工程学报2008(2)
[4]  Kachman S D,Smith J A,Alternative measures of accuracy in plant spacing for planters using single seed metering,Transactions of the ASAE,1995(2).
[5]  方开泰,均匀设计与均匀设计表,北京:科学出版社,1994.
[6]  Karayel D,Barut Z B,Ozmerzi A,Mathematical modeling of vacuum pressure on a precision seeder,Biosystems Engineering,2004(4).
[7]  Singh R C,Singh G,Saraswat D C,Optimisation of design and operating parameters of a pneumatic seed metering device for planting cottonseeds,Biosystems Engineering,2005(4).
[8]  Barut,Zeliha Bereket,Ozmerzi,Effect of different operating parameters on seed holding in the single seed metering unit of a pneumatic planter,Turkish Journal of Agriculture Forestry,2004(6).
[9]  Fallack S S,person S P E,Vacuum nozzle design for seed metering,Transactions of the ASAE,1984(1).
[10]  Robert J Orth,Scott R Marion,Steven Granger,Evaluation of a mechanical seed planter for transplanting Zostera marina (eelgrass) seeds,Aquatic Botany,2009.
[11]  高玉林 人参播种排种器的试验研究 [J].-农业与技术2001(6)
[12]  沈卫强.杨军.洪英.兰秀英 一种新型苜蓿排种器的研制与实验 [J].-新疆农机化2003(4)
[13]  于建群.马成林.杨海宽.马旭 组合内窝孔玉米精密排种器型孔的研究 [J].-吉林工业大学自然科学学报2000(1)
[14]  马连元,刘俊锋,崔和瑞,内侧充种垂直圆盘排种器的结构、原理和应用,农业机械学报,1996(Sup).
[15]  马成林,气吹排种器充填原理的研究,农业机械学报,1981(4).

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133