Otero J;Saiz A;Brufau J,Reduced dimensions autonomous AFM system for working in microbiorobotics,2006.
[2]
Burcher M R,A system for simultaneously measuring contact force,ultrasound,and position information for use in forcebased correction of freehaud scanning,IEEE Trans Ultr Ferr Freq Cont,2005(8).
[3]
M.R. Rosenberger ；E. Forlerer ；C.E. Schvezov,Modeling the micro-indentation of metal matrix composites,Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing？,2007, A463(1-2).
[4]
GB/T 1172-1999黑色金属硬度及强度换算值
[5]
费业泰,动态测量误差修正原理与技术,北京:中国计量出版社,2001.
[6]
,ISO/TR 10108 Steel-conversion of hardness values to tensile strength values,ISO,1989.
[7]
Locci N,A numerical approach to the evaluation of uncertainty in nonconventional measurements on power systems,Hungary Budapest:IEEE Press,2001.
[8]
Ghiani E,Evaluation of uncertainty in measurements based on digitized data,Meas,2002(4).
[9]
Sonmez Fazil O;Demir Ahmet,Analytical relations between hardness and strain for cold formed parts,Journal of Materials Processing Technology,2007(1 - 3).
[10]
Wang Zhongyu,Estimation of non-statistical uncertainty in precision measurement using grey system theory,International Journal of Advanced Manufacturing Technology,2003(3).
[11]
Roberts S M;Kusiak J;Withers D J,Numerical prediction of the development of particle stress in the forging of aluminum metal matrix composites,Journal of Materials Processing Technology,1996(1 - 4).
[12]
Konrad Herrmann;Thomas Polzin,New guidelines to the determination of the uncertainty of hardness measurements.tm-Technisches Messen,Oldenbourg Wissenschaftsverlag,2005(5).
[13]
Wang Zhongyu,Novel uncertainty-evaluation method of virtual instrument small sample size,Journal of Testing and Evaluation,2008(3).
[14]
Janosec M;Schindler I;Vodarek V,Microstructure and mechanical properties of cold rolled,annealed HSLA strip steels,Archives of Civil and Mechanical Engineering,2007(2).
[15]
Albrecht,Interface reactions in microelectronic solder joints and associated intermetallic compounds:an investigation of their mechanical properties using nanoindentation,2003.
[16]
,BIPM-IEC-IFCC-ISO-IUPAC-IUPAP-OIML.Guide to expression of uncertainty in measurement,ISO,1995.
[17]
刘智敏,测量不确定度的应用,宇航计测技术,1997(5).
[18]
王中宇;张海滨;刘智敏.测量不确定度最大残差系数的一种新算法[J].计量学报,2006(3)
[19]
Hu T;Desai J P,Soft-tissue material properties under large deformation:strain rate effect,2004.
[20]
Wang Zhongyu ；Ge Leyi,Novel Method of Evaluating Dynamic Repeated Measurement Uncertainty,Journal of Testing and Evaluation？,2008, 36(5).
