齿轮传动系统轮齿啮合过程动载荷谱研究
DOI: 10.6041/j.issn.1000-1298.2012.08.040, PP. 221-225
Keywords: 齿轮传动系统,动力学,啮合过程,载荷谱
Abstract:
建立了齿轮系统轮齿啮合过程动力学分析模型，推导了综合考虑时变啮合刚度、齿面磨损、齿形误差和安装误差的齿轮动态微分方程，提出了齿轮传动系统动载荷谱的分析方法，研究了齿轮系统载荷谱的时域特性、频域特性和时频特性，并将数值仿真结果与实验结果进行比较，结果表明：该数值仿真模型和实验结果相吻合。
| [1] | Roland Mathis;Yves Remond Kinematic and dynamic simulation of epicyclic gear trains 2009(2)
|
| [2] | Vedmar L;Andersson A A method to determine dynamic loads on spur gear teeth and on bearings 2003(5)
|
| [3] | 樊智敏;张光辉 双渐开线齿轮振动特性的试验研究 2002(5)
|
| [4] | 娄依志;王小群;李威 非对称渐开线圆柱齿轮的动力学特性 2005(3)
|
| [5] | 邓效忠;徐恺;潘十成 直廓内齿与渐开线齿轮啮合传动计算与噪声试验 2009(11)
|
| [6] | Khabou M T;Bouchaala N;Chaari F Study of a spur gear dynamic behavior in transient regime 2011(8)
|
| [7] | Yuksel C;Kahraman A Dynamic tooth loads of planetary gear sets having tooth profile wear 2004(7)
|
| [8] | Jean-Luc Dion;Sylvie Le Moyne Gear impacts and idle gear noise:experimental study and non-linear dynamic model 2009(8)
|
| [9] | Marcello Faggioni;Farhad S Samani Dynamic optimization of spur gears 2011(4)
|
| [10] | Andersson A;Vedmar L A dynamic model to determine vibrations in involute helical gears 2003(2)
|
| [11] | 段福海;胡青春;谢存禧 钢塑齿轮组合行星传动的振动特性 2010(1)
|
| [12] | 王立华;李润方;林腾蛟 齿轮系统时变刚度和间隙非线性振动特性研究 2003(13)
|
| [13] | 陈奇;赵韩;黄康 齿轮结合面切向接触刚度分形计算模型研究 2011(2)
|
Full-Text
