Van Kalmthout E,Veynante D,Candel S.Direct numerical simulation analysis of flame surface density equation in non-premixed turbulent combustion[C]//26th Symposium(International) on Combustion,The Combustion Institute,Pittsburge,1996.
[3]
Vervisch L,Hauguel R,Domingo P,et al.Three facets of turbulence combustion modeling:DNS of premixed Vflame,LES of lifted nonpremixed flame and RANS of jet-flame[J].Journal of Turbulence,2004,5 (4):1 ～ 36.
[4]
Meneveau C,Poinsot T.Stretching and quenching of flamelets in premixed turbulent combustion[J].Combustion and Flame,1991,86:311～332.
[5]
Blint R J.The relationship of the laminar flame width to flame speed[J].Combustion Science and Technology,1986,49(1):79～92.
[6]
Colin O,Benkenida A,Angelberger.A 3D modeling of mixing,ignition and combustion phenomena in highly stratified gasoline engines[J].Oil & Gas Science and Technology-rev.IFP,2003,58(1):47～62.
[7]
Magnussen B F,Hjertager B H.On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion[C] // Proceedings of the 16th Symposium (International)on Combustion,The Combustion Institute,1976:719～729.
[8]
Abraham J,Bracco F V,Reitz R D.Comparison of computed and measured premixed charge engine combustion[J].Combustion and Flame,1985,60 (3):309 ～ 322.
[9]
Patterson M A,Kong S C,Hampson G J,et al.Modeling the effects of fuel injection characteristics on diesel engine soot and NOx emissions[C].SAE Paper 940523,1994.
[10]
Metghalchi M,Keck J C.Burning velocities of mixtures of air with methanol,isooctane,and indolene at high pressure and temperature[J].Combustion and Flame,1982,48:191～210.
[11]
Candel S,Poinsot T.Flame stretch and the balance equation for the flame area[J].Combustion Science and Technology,1990,70 (1):1 ～ 15.
[12]
Delhaye B,Cousyn B.Computation of flow and combustion in spark ignition engine and comparison with experiment[C].SAE Paper 961960,1996.
[13]
Pope S B.The evolution of surfaces in turbulence[J].Int.J.Eng.Sci.,1988,26(5):445～469.
[14]
Colin O,Benkenida A.The 3-zones extended coherent flame model (ECFM3Z) for computing premixed/diffusion combustion[J].Oil & Gas Science and Technology-rev.IFP,2004,59 (6):593 ～ 609.
[15]
Weller H G,Uslu S,Gosman A D,et al.Prediction of combustion in homogeneous-charge spark-ignition engines[C]// 3rd Int.Symp.on Diagnostics and Modeling of Combustion in Internal Combustion Engines,Yokohama,Japan,1994.
[16]
Heel B,Maly R,Weller H G,et al.Validation of SI combustion model over range of speed,load,equivalence ratio and spark timing[C]//4th Int.Symp.on Diagnostics and Modeling of Combustion in Internal Combustion Engines,Kyoto,Japan,1998.
[17]
Boudier P,Henriot S,Poinsot T,et al.A model for turbulent flame ignition and propagation in spark ignition engines[C] // Proceedings of the 24th Symposium (International) on Combustion,The Combustion Institute,1992.
[18]
Cheng W K,Diringer J A.Numerical modeling of SI engine combustion with a flame sheet model[C].SAE Paper 910268,1991.
[19]
Veynante D,Vervisch L.Turbulent combustion modeling[J].Progress in Energy and Combustion Science,2002,28(3):193～266.
[20]
Halstead M P,Kirsch L J,Prothero A,et al.A mathematical model for hydrocarbon auto-ignition at high pressures[M].Proc.Royal.Society of London,A246,1975:309～322.
[21]
Theobald M A,Cheng W K.A numerical study of diesel ignition[J].ASME 87-FE-2,1987.
[22]
蒋德明.内燃机燃烧与排放学[M].西安:西安交通大学出版社,2001.
[23]
Methodology STAR -CD version 3.10A[M].Computational Dynamics Limited,1999.
