Shieh T,Perng C,Chu D,Torque converter analytical program for blade design process[SAE Paper 2000-01-1145],2000.
[2]
Yasunori Kunisaki,Toshio Kobayashi,Tetsuo Saga,PIV measurement on the flow field around a stator cascade of automotive torque converter[SAE Paper 2001-01-0868],2001.
Dong Y,Lakshminarayana B,Experimental investigation of the flow field in an automotive torque converter stator,Journal of Fluids Engineering,Transactions of the ASME,1999(4).
[5]
Dong Y,Lakshminarayana B,Rotating probe measurements of the pump passage flow field in an automotive torque converter,Journal of Fluids Engineering,Transactions of the ASME,2001(1).
[6]
Yasunori Kunisaki,Toshio Kobayashi,Tetsuo Saga,A study on internal flow field of automotive torque converter three-dimensional flow analysis around a stator cascade of automotive torque converter by using PIV and CT techniques,JSAE Review,2001(4).
[7]
Shin Sehyun,Chang Hyukjae,Athavale Mahesh,Numerical investigation of the pump flow in an automotive torque converter[SAE Paper 1999-01-1056],1999.
[8]
Huitenga H,Mitra N K,Improving start-up behavior of fluid couplings through modification of runner geometry:part Ⅰ--fluid flow analysis and proposed improvement,Journal of Fluids Engineering,Transactions of the ASME,2000(4).
[9]
Huitenga H,Mitra N K,Improving start-up behavior of fluid couplings through modification of runner geometry:part Ⅱ--modification of runner geometry and its effects on the operation characteristics,Journal of Fluids Engineering,Transactions of the ASME,2000(4).
[10]
Dong Yu,Korivi Vamshi,Attibele Pradeep,Torque converter CFD engineering part Ⅰ:torque ratio and K factor improvement through stator modifications.[SAE Paper 2002-01-0883],2002.
[11]
Dong Yu,Korivi Vamshi,Attibele Pradeep,Torque converter CFD engineering part Ⅱ:performance improvement through core leakage flow and cavitation control[SAE Paper 2002-01-0884],2002.
[12]
Flaek R,Brun K,Fundamental analysis of the secondary flows and jet-wake in a torque converter pump--part Ⅰ:model and flow in a rotating passage,Journal of Fluids Engineering,Transactions of the ASME,2005(1).
[13]
Flack R,Brun K,Fundamental analysis of the secondary flows and jet-wake in a torque converter pump--part Ⅱ:flow in a curved stationary passage and combined flows,Journal of Fluids Engineering,Transactions of the ASME,2005(1).
[14]
Lee Chinwon,Jang Wookjin,Lee Jang Moo,Three dimensional flow field simulation to estimate performance of a torque converter[SAE Paper 2000-01-1146],2000.
[15]
Kowalski Darin,Anderson Carl,Blough Jason,Cavitation prediction in automotive torque converters[SAE Paper 2005-01-2557],2005.
[16]
Norihiko Watanabe,Shinya Miyamoto,Masayuki Kuba,The CFD application for efficient designing in the automotive engineering[SAE Paper 2003-01-1335],2003.
[17]
Yang Seunghan,Shin Sehyun,Bae Incheol,A computer-integrated design strategy for torque converters using virtual modeling and computational flow analysis[SAE Paper 1999-01-1046],1999.
[18]
Kraus S O,Flack R,Habsieger A,Periodic velocity measurements in a wide and large radius ratio automotive torque converter at the pump / turbine interface,Journal of Fluids Engineering,Transactions of the ASME,2005(2).
Pohl Brad,Transient torque converter performance,testing,simulation and reverse engineering[SAE Paper 2003-01-0249],2003.
[29]
Tetsuya Kubota,Toshio Kobayashi,Tetsuo Saga,Application study of PIV measurement of flow flied around lock-up clutch of automotive torque converter,JSAE Review,2003(4).
[30]
Shin Sehyun,Chang Hyukjae,Joo In-Sik,Effect of scroll angle on performance of automotive torque converter[SAE Paper 2000 -01-1158,],2000.
[31]
Shin Sehyun,Lee Byung-Cheol,Hong Jong-Hae,Performance improvement using a slotted stator of an automotive torque converter[SAE Paper 2003-01-0247],2003.
