Bush J W;Beagle W P,Derivation of a general relation governing the conjugacy of scroll profiles,Herrick Laboratories Press,1992.
[4]
Zhao Yuanyang ；Li Liansheng ；Shen Jiang ；Zhang Wei ；Shu Pengcheng,Research on oil-free air scroll compressor with high speed in 30kW fuel cell,Applied Thermal Engineering？,2003, 23(5).
[5]
王君;刘振全.采用圆渐开线修正涡旋压缩机涡齿型线[J].机械工程学报,2006(6)
[6]
高秀峰;冯诗愚;顾兆林.圆弧类修正齿型涡旋机械气体力研究[J].西安交通大学学报,2004(11)
[7]
Liu Zhenquan;Du Guirong;Yu Shicai,The graphic method of modified wrap of scroll compressor,HerrickLaboratories Press,1992.
[8]
王立存;陈进;李世六.基于泛函的涡旋型线共轭啮合理论[J].机械工程学报,2007(3)
[9]
Wang Baolong;Li Xianting;Shi Wenxing,A general geometrical model of scroll compressors based on discretional initial angles of involute,International Journal of Refrigeration-Revue Internationale du Froid,2005(6).
[10]
Gravesen J. ；Henriksen C.,The geometry of the scroll compressor,SIAM Review？,2001, 43(1).
[11]
Lemon V;Quoilin S;Cuevas C,Testing and modeling a scroll expander integrated into an organic Rankine cycle,Applied Thermal Engineering,2009(14-15).
[12]
Sawada T;Ohbayashi T,Theoretical prediction of the pumping performance of dry pumps(taking the scroll pump and the screw pump by way of example),Journal ofthe Vacuum Society of Japan,2006(8).
