Lin S H，Yen S I，Weng C C. Simplified Design Approach for Cold-Formed Stainless Steel Compression Members Subjected to Flexural Buckling[J]. Thin-Walled Structures，2005，43 (12): 1831-1851.
[2]
Rasmussen K J R，Rondal J. Explicit Approach to Design of Stainless Steel Columns [J]. J Struct Eng，ASCE，1997，123 (7): 857-863.
[3]
Rasmussen K J R，Rondal J. Strength Curves for Metal Columns [J]. J Struct Eng，ASCE，1997，123(6):721-728.
Quach W M，Teng J G.,Chung K F. The-Stage Full-Range Stress-Stain Model for Stainless Steel[J]. Journal of Structural Engineering，2008，134(9):1518-1527.
[6]
GB 50017—2003 钢结构设计规范[S].
[7]
EC3. Eurocode 3: Design of Steel Structures-Part 1. 3: General Rules-Supplementary Rules for Cold-Formed Members and Sheeting[S]. European Committee for Standardization，ENV 1993-1-3，CEN，Brussels; 2006.
[8]
Liu Y，Young B. Buckling of Stainless Steel Square Hollow Section Compression Members[J]. J. Constr. Steel Res.,2003，59(2):165-177.
[9]
Young B，Liu Y. Experimental Investigation of Cold-Formed Stainless Steel Columns [J]. J. Struct. Eng.,2003，129 (2): 169-176.
[10]
Young B，Hartono W. Compression Test of Stainless Steel Tubular Members[J]. J. Struct. Eng.,2002，128(6):754-761.
[11]
Young B，Lui W M. Behavior of Cold-Formed High Strength Stainless Steel Sections[J]. J. Struct. Eng.,2005，131(11): 1738-1745.
[12]
Rasmussen K J R，Hancock G J. Design of Cold-Formed Stainless Steel Tubular Members. I: Columns [J]. J. Struct Eng，ASCE，1993，119(8):2349-2367.
[13]
Gardner L，Nethercot D A. Experiments on Stainless Steel Hollow Sections-Part 1: Material and Cross-Sectional Behaviour [J]. J. Constr. Steel Res.,2004，60(9):1291-1318.
[14]
Gardner L，Nethercot D A. Experiments on Stainless Steel Hollow Sections-Part 2:Members Behavior of Columns and Beams[J]. J. Constr. Steel Res.,2004，60(9):1319-1332.
[15]
EC3. Eurocode 3: Design of Steel Structures-Part 1. 4: General Rules-Supplementary Rules for Stainless Steels[S]. European Committee for Standardization，ENV 1993-1-4，CEN，Brussels:2006.
[16]
ASCE. Specification for the Design of Cold-Formed Stainless Steel Structural Members[S]. 2002.
