.Yan Y J, Cheng L, Wu Z Y, et al. Develoment in Vibration based Structural Damage Detection Technique[J]. Mechanical Systems and Signal Processing, 2007, 21: 2198-2211.
[2]
.Sophia H, Karolos H. Damage Detection Using Impulse Response[J]. Nonlinear Analysis, Theory, Methods & Applications, 1997, 30(8): 4 757-4 764.
[3]
.Pandey A K, Biswas M, Samman M M. Damage Detection from Changes in Curvature Model Shapes [J]. Journal of Sound and Vibration, 1991, 145(2): 321-332.
[4]
.Pandey A K, Biswas M. Damage Detection in Structures Using Changes in Flexibility. Journal of Sound and Vibration, 1994, 169(1): 3-17.
[5]
.Bernal D. Load Vectors for Damage Localization [J]. Journal of Engineering Mechanics,ASCE, 2002, 128(1): 7-14.
[6]
.Gao Y, Spencer Jr B F, Bernal D. Experimental Verification of the Flexibility??based Damage Locating Vector Method [J]. Journal of Engineering Mechanics, ASCE, 2007, 133(10): 1043-1049.
[7]
.Hadjileontiadis L J, Douka E, Trochidis A. Fractal Dimension Analysis for Crack Identification in Beam Structures [J]. Mechanical Systems and Signal Processing, 2005, 19(3): 659-674.
[8]
.Zhang Z, Aktan A E. Application of Modal Flexibility and its Derivatives in Structural Identification[J]. Research in Nondestructive Evaluation, 1998, 10(1): 43-61.
[9]
.Wu D, Law S S. Damage localization in Plate Structures from Uniform Load Surface Curvature [J]. Journal of Sound and Vibration, 2004, 276: 227-244.
[10]
.Yang J N, Lei Y, Lin S, et al. Hilbert-Huang Based Approach for Structural Damage Detection[J]. Journal of Engineering Mechanics, ASCE, 2004, 130(1): 85-95.
[11]
.Ma T W, Yang H T, Chang C C. Structural Damage Diagnosis and Assessment under Seismic Excitations [J]. Journal of Engineering Mechanics, ASCE, 2005, 131(10): 1036-1045.
[12]
.Doebling S W, Farrar C R, Prime M B. A Summary Review of Vibration based Damage Identification method [J]. The Shock and Vibration Digest, 1998, 30(2): 91-105.
[13]
.Sohn H, Farrar C R, Hemez F M. A Review of Structural Health Monitoring Literature: 1996-2001 [R]. Los Alamos National Laboratory Report , LA-13976??MS, 2004.
.Rytter A. Vibration Based Inspection of Civil Engineering Structures[D]. [Ph. D. dissertation] :Aalborg University, Denmark, 1993.
[16]
.Farrar C R, Worden K. An Introduction to Structural Health Monitoring[J]. Phil.Trans. R. Soc. , 2007, 365: 303-315.
[17]
.Giraldo D F. A Structural Health Monitoring Frame??work for Civil Structures[D]: [Ph. D. dissertation]. Washington University, Saint Louis, Missouri, USA, 2006.
[18]
.Humar J , Bagchi A, Xu H. Performance of Vibration??based Techniques for the Identification of Structural Damage[J]. Structural Health Monitoring, 2006, 5(3): 215-241.
[19]
.Wang J, Qiao P. Improved Damage Detection for Beam-type Structures Using a Uniform Load Structure [J]. Structural Health monitoring, 2007, 6(2): 99-110.
[20]
.Park S, Bolt on R W, Stubbs N. Blind Test Results for Nondestructive Damage Detection in a Steel Frame [J]. Journal of Structural Engineering, ASCE, 2006, 132(5): 800-809.
[21]
.Jaishi B, Ren W X. Damage Detection by Finite Element Model Updating Using Modal Flexibility Residual [J]. Journal of Sound and Vibration, 2006, 290: 369-387.
[22]
.Yuen K, Beck J L, Kat afygiotis L S. Efficient Model Updating and Health Monitoring Methodology using Incomplete Modal Data Without Mode Matching [J]. Structural Control and Health Monitoring, 2006, 13: 91-107.
[23]
.Messina A, Williams E J, Contursi T. Structural Damage Detection by a Sensitivity and Statistical??basedMethod[J]. Journal of Sound and Vibration, 1998, 216(5): 791-808.
[24]
.SohnH, Czarnecki J A, Farrar C R. Structural Health Monitoring Using Statistical Process Control [J]. Journal of Structural Engineering, ASCE, 2000, 126(11): 1356-1363.
[25]
.Bodeux J B, Golinval J C. Application of ARMAV Models to the Identification and Damage Detection of Mechanical and Civil Engineering Structures[J]. Smart Materials and Structures, 2001, 10: 479-489.
[26]
.Lam H F, Katafygiotis L S, Mickleborough N C. Application of Statistical Model Updat ing Approach on Phase I of the IASC??ASCE Structural Health Monitoring Benchmark Study [J]. Journal of Engineering Mechanics, ASCE, 2004, 130(1): 34-48.
[27]
.Erdogan A, Mahmoud M R T, David S E, et al. Damage Pattern Recognition for Structural Health Monitoring Using Fuzzy Similarity Prescription[J]. Computer??Aided Civil and Infrastructure Engineering, 2006, 21: 549-560.
[28]
.Newland D E. Wavelet Analysis of Vibration. Part 1: theory [J]. Journal of Vibration and Acoustics, 1994, 116: 409-416.
[29]
.Staszewski W J. Structural and Mechanical Damage Detection Using Wavelets[J]. The Shock and Vibration Digest, 1998, 30 (6): 457-472.
[30]
.Wang Q, Deng X. Damage Detection with Spatial Wavelets [J]. Insternational Journal of Solids and Structures, 1999, 36: 3443-3468.
.Sun Z, Chang C C. Structural Damage Assessment Based on Wavelet Packet Transform[J]. Journal of Structural Engineering, ASCE, 2002, 128(10): 1354-1361.
[33]
.Barai S V, Pandey P C. Time delay Neural Networks in Damage Detection of Railway Bridges [J]. Advances in Engineering Software, 1997, 28: 1-10.
[34]
[ .Masri S F, Smyth A W, Chassiakos A G, et al. Application of Nueural Networks for Detection of Changes in Nonlinear Systems[J]. Journal of Engineering Mechani cs,ASCE, 2000, 126(7): 666-676.
[35]
.Fang X, Luo H, Tang J. Structural Damage Detection Using Neural Network with Learning Rate Improvement [J]. Computers and Structures, 2005, 83: 2150-2161.
[36]
. Adeli H, Jiang X. Dynamic Fuzzy Wavelet Neural NetworkModel for Structural System Identification[J]. Journal of Structural Engineering, ASCE, 2006, 132(1): 102-111.
[37]
.Perera R, Torres R. Structural Damage Detection Via Modal Data with Genetic Algorithms[J]. Journal of Structural Engineering, ASCE, 2006, 132(9): 1491-1501.
[38]
.Sanayei M, Onipede O. Damage Assessment of Structure Using Static Test Data[J]. AIAA Journal, 1991, 29(7): 1174-1179.
[39]
.banan Mo R, Banan Ma R, Hjelmstad K D. Parameter Estimation of Structures from Static Response. Ⅰ: Computational aspects [J]. Journal of Structural Engineering, 1994, 120(11): 3243-3258.
[40]
.Hjelmstad K D, Shin S. Damage Detection and Assessment of Structures from Static Response [J]. Journalf of Engineering Mechanics, 1997, 123(6): 568-576.
[41]
.Sanayei M, Saletnik M J. Parameter Estimation of Structures from Static Strain Measurements. I: Formulation[J]. Journal of Structural Engineering, 1996, 122(5), 555-562.
[42]
.Sanayei M, Saletnik M J. Parameter Estimation of Structures from Static Strain Measurements. Ⅱ: Error Sensitivity Analysis[J]. Journal of Structural Engineering, 1996, 122(5): 563-572.
[43]
.Liu P L, Chian C C. Parameteric Identification of Truss Structures Using Static Strains[J]. Journal of Engineering Mechanics, 1997, 123(7): 927-933.
[44]
.Chou J H, Ghaboussi J. Genetic Algorithm in Structural Damage Detection[J]. Computers& Structures, 2001, 79(14): 1335-1353.
[45]
.ShentonH W, Hu X. Damage Identification Based on Dead Load Redistribution: Methodology [J]. Journal of Structural Engineering, ASCE, 2006, 132(8): 1254-1263.
[46]
.Park H S, Lee H M, Adeli H. A New Approach for Health Monitoring of Structures: Terrestrial Laser Scanning [J]. Computer Aided Civil and Infrastructure Engineering, 2007, 22: 19-30.
[47]
.Shah S P, Popovics J S, Subramaniam K V, et al. New Directions in Concrete Health Monitoring Technology [J]. Journal of Engineering Mechanics, ASCE, 2000, 126(7): 754-760.
[48]
.Victor G, Adrian C. Embedded Nondestructive Evaluation for Structural Health Monitoring, Damage Detection, and Failure Prevention[J]. The Shock and Vibration Digest, 2005, 37 (2): 83-105.
[49]
.Raghavan A, Cesnik C E S. Review of Guided??wave Structural Health Monitoring[J]. The Shock and Vibration Digest, 2007, 39 (2): 91-114.
[50]
.Gao Y, Spencer Jr B F, Ruiz Sandoval M E. Distributed COmputing Strategy for Structural Health Monitoring[J]. Structural COntrol and Health Monitoring, 2006, 13: 488- 507.
[51]
.Ruiz??sandoval M, nagyama T, Spencer Jr B F. Sensor Development Using Berkeley Mote Platform [J]. Journal of Earthquake Engineering, 2006, 10(2): 289-309.
[52]
.Spencer Jr B F, Ruiz Sandoval M E, Kurata N. Smart Sensing Technology: Opportunit ies and Challenges[J]. Structural Control and Health Monitoring, 2004, 11: 349-368.
[53]
.Lynch J P, Loh K J. A Summary Review of Wireless Sensors and Sensor Networks for St ructural Health Monit oring[J]. The Shock and Vibration Digest, 2006, 38(2): 91-128.
[54]
.Gu H, Zhao Y, Wang M L. A Wireless Smart PVDF Sensor for Structural Health Monitoring [J]. Structural Control and Health Monitoring, 2005, 12: 329-343.
[55]
.Sodano H A, Inman D J, Part G. A Review of Power Harvesting from Vibration Using Piezoelectric Materials[J]. The Shock and Vibration Digest, 2004, 36(3): 197-205.
[56]
.Farrar C R, Lieven N A J. Damage Prognosis: the Future of Structural Health Monitoring[J]. Phil.Trans. R. Soc., 2007, 365: 623-632.
