Huang Mei，He Renmu，Yang Shaobing．Application of fuzzy clustering in measurement-based load modeling[J]．Power System Technology，2006，30(14)：49-52(in Chinese)．
He Renmu，Wang Weiguo，Jiang Debin，et al. Measurement-based dynamic load modeling and model validation on Guangdong Grid[J]．Proceedings of the CSEE，2002，22(3)：78-82(in Chinese)．
[9]
Pereira L，Kosterev D，Makin P，et al．An interim dynamic induction motor model for stability studies in the WSCC[J]．IEEE Trans on Power Systems，2002，17(4)：1108-1115．
[10]
Kosterev D N，Taylor C W，Mittelstadt W A．Model validation for the August 10，1996 WSCC system outage[J]．IEEE Trans on Power Systems，1999，14(3)：967-979．
[11]
IEEE Task Force on Load Representation for Dynamic Performance．Load representation for dynamic performance analysis[J]．IEEE Trans on Power Systems，1993，8(2)：472-482．
[12]
IEEE Task Force on Load Representation for Dynamic Performance．Standard load models for power flow and dynamic performance simulation[J]．IEEE Trans on Power Systems，1995，10(3)：1302-1313．
Zhang Dongxia，Tang Yong，Zhu Fang，et al．Equivalent model for induction-motor load connected to high voltage bus[J]．Proceedings of the CSEE，2006，26(6)：14-18(in Chinese)．
[15]
Milanovic J，Jenkins N．Power system load modeling for stability studies[R]．London：Department of Electrical Engineering & Electronics，E A Technology Ltd.，2002．
Sun Huadong，Zhou Xiaoxin，Li Ruomei．Influence of induction motor load parameters on power system transient voltage stability[J]．Power System Technology，2005，29(23)：1-6(in Chinese)．
[18]
General Electric Company．Load modeling for power flow and transient stability computer studies[R]．EPRI，1987．
[19]
IEEE Task Force on Load Representation for Dynamic Performance．Bibliography on models for power flow and dynamic performance simulation[J]．IEEE Trans on Power Systems，1995，10(1)：523-538．
