陈铮,董新洲,罗承沐. 单端工频电气量故障测距算法的鲁棒性[J].清华大学学报:自然科学版,2003,43(3):310-313. Chen Zheng,Dong Xinzhou,Luo Chengmu.Robustness of one-terminal fault location algorithms based on power frequency quality[J].Journal of Tsinghua Univ.:Sci &Tech,2003,43(3):310-313(in Chinese).
[2]
曾祥君,尹项根,林福昌,等. 基于行波传感器的输电线路故障定位方法研究[J].中国电机工程学报,2002,22(6):42-48. Zeng Xiangjun,Yin Xianggen,Lin Fuchang,et al.Study on fault location for transmission lines based on the sensor of traveling wave[J].Proceedings of the CSEE,2002,22(6): 42-48(in Chinese).
[3]
康小宁,索南加乐. 基于参数识别的单端电气量频域法故障测距原理[J].中国电机工程学报,2005,25(2):22-27. Kang Xiaoning,Suonan Jiale.Frequency domain method of fault location based on parameter identification using one-terminal data[J].Proceedings of the CSEE,2005,25(2):22-27(in Chinese).
[4]
索南加乐,张怿宁,齐军,等.基于参数识别的时域法双端故障测距原理[J].电网技术,2006,30(8):65-70. Suonan Jiale,Zhang Yining,Qi Jun.Time domain fault location method based on transmission line parameter identification using two terminals data[J].Power System Technology,2006,30(8):65-70(in Chinese).
[5]
施世鸿,何奔腾. 基于分布参数模型的双端非同步故障测距算法[J].电网技术,2008,32(9):32-37. Shi Shihong,He Benteng.A two-terminal fault location algorithm using asynchronous phasors based on distributed parameter mode [J].Power System Technology,2008,32(9):32-37(in Chinese).
[6]
郑秀玉,李晓明,丁坚勇,等.行波故障定位系统中数据采集卡的设计与实现[J].电网技术,2008,32(5):47-53. Zheng Xiuyu,Li Xiaoming,Ding Jianyong,et al.Design and implementation of data sampling card for traveling wave fault location system[J].Power System Technology,2008,32(5):47-53(in Chinese).
[7]
余贻鑫.智能电网的技术组成和实现顺序[J].南方电网技术,2009,3(2): 1-5. Yu Yixin.Technical composition of smart grid and its implementation sequence[J].Sothern Power System Technology,2009,3(2):1-5(in Chinese).
[8]
肖世杰.构建中国智能电网技术思考[J].电力系统自动化,2009, 33(9):1-4. Xiao Shijie.Consideration of technology for constructing Chinese smart grid[J].Automation of Electric Power Systems,2009,33(9):1-4(in Chinese).
[9]
施世鸿,何奔腾,张武军.T型高压输电线路故障测距[J].中国电机工程学报,2008,28(25):28-32. Shi Shihong,He Benteng,Zhang Wujun.Fault location for HV three-terminal transmission lines[J].Proceedings of the CSEE,2008, 28(25):28-32(in Chinese).
[10]
田羽,范春菊,龚震东.带同杆双回线的T型线路故障分支判定算法[J].电力系统自动化,2006,30(21):71-76.Tian Yu,Fan Chunju,Gong Zhendong.Faulted line selecting method of T circuit of parallel transmission Lines[J].Automation of Electric Power Systems,2006,30(21):71-76(in Chinese).
[11]
Girgis A A,Hart D G,Peterson W L.A new fault location technique for two- and three-terminal lines[J].IEEE Trans on Power Delivery,1992,7(1): 98-107.
[12]
Abe M,Otsuzuki N,Emura T,et al.Development of a new fault location system for multi-terminal single transmission lines[J].IEEE Trans on Power Delivery,1995,10(1):1516-1532.
[13]
Lien Kai-ping,Liu Chih-wen,Jiang Joe-air.A novel fault location algorithm for multi-terminal lines using phasor measurement units[J].IEEE Trans on Power Delivery,2005,21(10):576-581.
[14]
王波.基于WAMS的高压输电网络故障定位研究[D].杭州:浙江大学,2010.
[15]
Jiang Quanyuan,Wang Bo.PMU based fault location using voltage measurements in large transmission network[J].IEEE Trans on Power Delivery,2012,21(10):1176-1182.
[16]
邬林勇,何正友,钱清泉.一种提取行波自然频率的单端故障测距方法[J].中国电机工程学报,2008,28(10):17-23. Wu Linyong,He Zhengyou,Qian Qingquan.A single ended fault location method using traveling wave natural frequency [J].Proceedings of the CSEE,2008,28(10):17-23(in Chinese).
