LIU Wei,RUI Xiao？ting,WANG Guo？ping.Terminal trajectory correction capability analysis and optimization design for control projectile[J].Journal of Nanjing University of Science and Technology,2006,30(4):449-453.(in Chinese)
[5]
徐劲祥.弹道修正弹追踪制导律研究[J].弹箭与制导学报,2004,24(4):163-165.
[6]
XU Jin？xiang.A study on pursuit guidance law of trajectory correction projectiles[J].Journal of Projectiles,Rockets,Missiles and Guidance,2004,24(4):163-165.(in Chinese)
YAO Wen？jin,WANG Xiao？ming,LI Wen？bin,et al.Control strategy of pulse engine in terminal correction mortar[J].Journal of Detection ＆ Control,2008,30:8-14.(in Chinese)
LIN De？fu,MOU Yu,CHANG Chao,et al.A study of target acquisition probability for laser semi？active terminal guided projectile[J].Transaction of Beijing Institute of Technology,2010,30(6):698-701.(in Chinese)
[11]
曹小兵.脉冲末修迫弹弹道特性分析与控制方案设计[D].南京:南京理工大学,2012.
[12]
CAO Xiao？bing.Analysis of ballistic characteristics and design of control scheme for terminal trajectory correction mortar projectile equipped with lateral impulses[D].Nanjing:Nanjing University of Science ＆ Technology,2012.(in Chinese)
[13]
韩子鹏.弹箭外弹道学[M].北京:北京理工大学出版社,2008.
[14]
HAN Zi？peng.Exterior ballistics of projectile and rocket[M].Beijing:Beijing Institute of Technology Press,2008.(in Chinese)
XU Jin？xiang.Models of laser detector and target azimuth for terminal correction mortar projectile[J].Acta Armamentarii,2007,27(7):793-795.(in Chinese)
[17]
一平.中国120毫米末修迫击炮弹武器系统[J].兵器知识,2007,10:24-25.
[18]
YI Ping.Chinese 120 mm terminal correction mortar projectile weapon system[J].Ordnance Knowledge,2007,10:24-25.(in Chinese)
[19]
王浩磊.基于脉冲控制的迫弹弹道末段修正研究[D].南京:南京理工大学,2012.
[20]
WANG Hao？lei.Study on terminal correction trajectory based on impulse control[D].Nanjing:Nanjing University of Science & Technology,2012.(in Chinese)
[21]
LI Xing？long,WANG Xiao？ming,YAO Wen？jin,et al.Optimization of launching angle based on the acquisition probability for laser semi？active terminal correction projectile[C]//2nd International Conference on Opto？Electronics Engineering and Materials Research.Zhengzhou:Trans Tech Publication Ltd,2013:209-212.
