况雨春, 伍开松, 杨迎新, 等. 三牙轮钻头破岩过程计算机仿真模型 [J]. 岩土力学, 2009, 30(增1): 235-238. Kuang Yuchun, Wu Kaisong, Yang Yingxin, et al. Simulation model of drilling process of three-cone bit[J]. Rock and Soil Mechanics, 2009, 30 (Suppl 1): 235-238.
[2]
邓嵘, 唐东, 安美, 等. 单牙轮钻头钻进过程的计算机仿真[J]. 石油机 械, 2014, 42(8): 45-48. Deng Rong, Tang Dong, An Mei, et al. Simulation of single-cone bit drilling process[J]. China Petroleum Machinery, 2014, 42(8): 45-48.
[3]
李玮, 郑浩然, 开月, 等. 基于单齿侵入理论的牙轮钻头钻速方程[J]. 东北石油大学学报, 2013, 37(1): 85-89. Li Wei, Zheng Haoran, Kai Yue, et al. Drilling rate equation of cone bit basied on single tooth intrusive theory[J]. Journal of Northeast Petroleum University, 2013, 37(1): 85-89.
[4]
李玮, 许兴华, 闫铁, 等. 欠平衡下牙轮钻头牙齿侵人系数及钻速研 究[J]. 西南石油大李学报: 自然科学版, 2013, 35(3): 168-172. Li Wei, Xu Xinghua, Yan Tie, et al. Study on the tooth invasion coefficient of cone bit and penetration rate in under-balance drilling [J]. Journal of Southwest Petroleum University: Science & Technology Edition, 2013, 35(3): 168-172.
[5]
Bourgoyne A T, Young F S. A multiple regression approach to optimal drilling and abnormal pressure detection[J]. SPE Journal, 1974, 14(4): 371-384.
[6]
Warren T M, Smith M B. Bottom hole stress factors affecting drilling rate at depth[J]. Journal of Petroleum Technology, 1985, 37(8): 1523- 1533.
[7]
石祥超, 万尚贤, 孟英峰, 等. 气体钻井钻速方程的建立与验证[J]. 天 然气工业, 2010, 30(11): 56-58. Shi Xiangchao, Wan Shangxian, Meng Yingfeng, et al. Establishment and verification of the gas drilling ROP equation[J]. Natural Gas Industry, 2010, 30(11): 56-58.
[8]
李昌盛. 基于多元回归分析的钻速预测方法研究[J]. 科学技术与工 程, 2013, 13(7): 1740-1743. Li Changsheng. Study of method for predict rate of penetration based of multiple regression analysis[J]. Science Technology and Engineering, 2013, 13(7): 1740-1743.
[9]
杨谋, 孟英峰, 李皋, 等. 地层渗透性对岩石强度及机械钻速影响因素 分析[J]. 地质科技情报, 2011, 30(3): 127-131. Yang Mou, Meng Yingfeng, Li Gao, et al. Analysis of formation permeability to the influence factors of rock strength and rate of penetration[J]. Geological Science and Technology Information, 2011, 30 (3): 127-131.
[10]
景宁, 樊洪海, 纪荣艺, 等. 基于数据挖掘技术的深井钻速预测方法研 究[J]. 石油机械, 2012, 40(7): 17-20. Jing Ning, Fan Honghai, Ji Rongyi, et al. Data mining technologybased research on the prediction method of deep well ROP[J]. China Petroleum Machinery, 2012, 40(7): 17-20.
[11]
林元华, 施太和, 梁政, 等. 冲旋钻井机械钻速仿真研究[J]. 石油学 报, 2004, 25(5): 88-92. Lin Yuanhua, Shi Taihe, Liang Zheng, et al. Simulation of penetration rate of air percussion drilling bit[J]. Acta Petrolei Sinica, 2004, 25(5): 88-92.
[12]
李玮, 李亚楠, 陈世春, 等. 井底牙轮钻头的钻速方程及现场应用[J]. 中国石油大学学报: 自然科学版, 2013, 37(3): 74-77. Li Wei, Li Yanan, Chen Shichun, et al. Drilling rate model of cone bit in bottom hole and field application[J]. Journal of China University of Petroleum: Nature Science Edition, 2013, 37(3): 74-77.
[13]
郑德帅, 高德利, 冯江鹏. 实钻条件下井底岩石可钻性预测模型研究 [J]. 岩土力学, 2012, 33(3): 859-863. Zheng Deshuai, Gao De1i, Feng Jiangpeng. A model for downhole rock drillability prediction under real drilling condition[J]. Rock and Soil Mechanics, 2012, 33(3): 859-863.
