王琦, 刘倩, 贺博, 等. 流化床生物质快速热解制取生物油试验研究 [J]. 工程热物理学报, 2008, 29(5): 885-888. Wang Qi, Liu Qian, He Bo, et al. Experimrntal research on biomass flash pyrolysis for bio-oil in a fluidized bed reactor[J]. Journal of Engineering Thermophysics, 2008, 29(5): 885-888.
[2]
曾涛, 漆小波, 黄卫星, 等. 方形气固密相床中局部颗粒浓度分布的实 验研究[J]. 高校化学工程学报, 2010, 24(5): 783-788. Zeng Tao, Qi Xiaobo, Huang Weixing, et al. Experimental study of local solid concentration distribution in a square gas-solid fluidized bed [J]. Journal of Chemical Engineering of Chinese Universities, 2010, 24 (5): 783-788.
[3]
田昊一, 康明雄, 吴元欣, 等. 布风板对磷矿混合颗粒流化特性与还原 反应的影响[J]. 化学工程, 2012, 40(12): 48-52. Tian Haoyi, Kang Mingxiong, Wu Yuanxin, et al. Effect of gas distributor on fluidization characteristics and reduction reaction of mixed phosphate ore particles[J]. Chemical Engineering, 2012, 40(12): 48-52.
[4]
聂向锋, 卢春喜, 蓝兴英. 高密度液固循环流化床流动特性研究及数 值模拟[J]. 化工学报, 2008, 59(6): 1366-1376. Nie Xiangfeng, Lu Chunxi, Lan Xingying. Experimental and computational investigation on hydrodynamics in high-density liquidsolid circulating fluidized bed[J]. Journal of Chemical Industry and Engineering, 2008, 59(6): 1366-1376.
[5]
Chen X Z, Shi D P, Xi G, et al. A fundamental CFD study of the gassolid flow field in fluidized bed polymerization reactors[J]. Powder Technology, 2011, 205(1-3): 276-288.
[6]
魏新利, 马新辉. 应用Fluent软件研究流化床中布风板结构[J]. 能源 工程, 2006(2): 15-19. Wei Xinli, Ma Xinhui, The structral choice and optimum of distributor in fluidized bed by Fluent software[J]. Energy Engineering, 2006(2): 15-19.
[7]
王文仲. 循环流化床锅炉风帽及布风板的实验与数值模拟研究[D]. 北京: 中国科学院研究生院, 2009. Wang Wenzhong. Experimental and numerical study of air distributors and air caps in CFB boilers[D]. Beijing: Graduate School of the Chinese Academy of Sciences, 2009.
[8]
杨士春, 刘荣厚. 流化床流态化质量影响因素[J]. 农业工程学报, 2009, 25(3): 205-208. Yang Shichun, Liu Ronghou. Effect of influencing factors on fluidization quality of fluidized bed[J]. Transactions of the CSAE, 2009, 25(3): 205-208.
[9]
董淑芹, 司崇殿, 曹长青, 等. 分布板开孔率对气固流化床流动特性的 影响[J]. 化学反应工程与工艺, 2008, 24(5): 433-439. Dong Shuqin, Si Chongdian, Cao Changqing, et al. Effect of perforated ratio of distributor on the fluidization characteristics in a gas-solid fluidized bed[J]. Chemieal Reaction Engineering and Technology, 2008, 24(5): 433-439.
[10]
Samruamphianskun T, Piumsomboon P, Chalermsinsuwan B. Effect of ring baffle configurations in a circulating fluidized bed riser using CFD simulation and experimental design analysis[J]. Chemical Engineering Journal, 2012, 210: 237-251.
[11]
王霄, 司慧, 程琦. 环形流化床生物质热裂解反应器的传热分析[J]. 科技导报, 2013, 31(14): 30-35. Wang Xiao, Si Hui, Cheng Qi. Heat transfer analysis of annular fluidized bed biomass pyrolysis reactor[J]. Science & Technology Review, 2013, 31(14): 30-35.
[12]
Gao X, Wu C, Cheng Y W, et al. Experimental and numerical investigation of solid behavior in a gas-solid turbulent fluidized bed[J]. Powder Technology, 2012, 228: 1-13.
[13]
金涌, 祝京旭, 汪展文, 等. 流态化工程原理[M]. 北京: 清华大学出版 社, 2001: 17-21. Jin Yong, Zhu Jingxu, Wang Zhanwen et al. Fluidization engineering principles[M]. Beijing: Tsinghua University Press, 2001: 17-21.
[14]
王储, 周肇秋, 阴秀丽, 等. 木屑在循环流化床中的流动特性研究[J]. 太阳能学报, 2010, 31(4): 501-506. Wang Chu, Zhou Zhaoqiu, Yin Xiuli, et al. Study of hydrodynamic characteristics of sawdust in a circulating fluidized bed[J]. Acta Energiae Solaris Sinica, 2010, 31(4): 501-506.
