唐世春, 张志宏, 张江江. 塔河油田点蚀测试及评价技术应用[J]. 科技 导报, 2013, 31(32): 42-48. Tang Shichun, Zhang Zhihong, Zhang Jiangjiang. Application of test and evaluation technology of pitting corrosion in Tahe Oilfield[J]. Science & Technology Review, 2013, 31(32): 42-48.
[2]
张江江, 张志宏, 羊东明, 等. 油气田地面集输碳钢管线内腐蚀检测技 术应用[J]. 材料导报, 2012, 26(S2): 118-122. Zhang Jiangjiang, Zhang Zhihong, Yang Dongming, et al. Corrosion detection technology for surface gathering carbon steel pipeline in oil and gas field[J]. Materials Review, 2012, 26 (S2): 118-122.
[3]
翁永基. 材料腐蚀通论——腐蚀科学与工程基础[M]. 北京: 石油工业 出版社, 2004: 30-50. Weng Yongji. Material corrosion general theory: Corrosion science and engineering foundation[M]. Beijing: Petroleum Industry Press, 2004: 30- 50.
[4]
万里平, 孟英峰, 梁生书. 油气田开发中的二氧化碳腐蚀及影响因素[J]. 全面腐蚀控制, 2003, 17(2): 15-17. Wan Liping, Meng Yingfeng, Liang Shengshu. Carbon dioxide corrosion and its influence factors in oil/gas field exploitation[J]. Total Corrosion, 2003, 17(2): 15-17.
[5]
闫伟, 邓金根, 董新亮, 等. 油管钢在CO2/H2S环境中的腐蚀产物及腐 蚀行为[J]. 腐蚀与防护, 2011, 32(3): 193-195. Yan Wei, Deng Jingen, Dong Xinliang, et al. Corrosion products and corrosion behavior of tubing steel in CO2/H2S environment[J]. Corrosion & Protection, 2011, 32(3): 193-195.
[6]
石鑫, 张志宏, 刘强,等. 塔河某单井管道频繁穿孔原因[J]. 油气储 运, 2011, 30(11): 848-850. Shi Xin, Zhang Zhihong, Liu Qiang, et al. Reason analysis on the corrosion to leak pipeline of well[J]. Oil & Gas Storage and Transportation, 2011, 30(11): 848-850.
[7]
王树涛, 郑新艳, 李明志, 等. 抗硫套管钢P110SS在高含H2S/CO2条 件下的硫化物应力腐蚀破裂敏感性[J]. 腐蚀与防护, 2013, 34(3): 189- 192. Wang Shutao, Zhen Xinyan, Li Minzhi, et al. Stress corrosion cracking sensitivity of sulfide-resistant csaing steel P110SS in hyperbaric H2S/ CO2 environments[J]. Corrosion & Protection, 2013, 34(3): 189-192.
[8]
张春颜, 钱文辉, 郑玉萍, 等. 深井油管CO2腐蚀规律及其应用研究[J]. 科技导报, 2012, 30(36): 47-51. Zhang Chunyan, Qian Wenhui, Zhen Yuping, et al. CO2 corrosion law and its applation to analysis of tubing in deep and super deep wells[J]. Science & Technology Review, 2012, 30 (36): 47-51.
[9]
郑华安, 闫化云, 佟琳, 等. 气举作业中连续油管腐蚀断裂原因[J]. 腐 蚀与防护, 2011, 32(9): 758-759. Zheng Huaan, Yan Huayun, Dong Lin, et al. Corrosion cracking csuse of coiled tubing in gas lift operation[J]. Corrosion & Protection, 2011, 32 (9): 758-759.
[10]
羊东明, 李亚光, 张江江, 等. 大涝坝气田油管腐蚀原因分析及治理 对策[J]. 石油钻探技术, 2011, 39(5): 81-84. Yang Dongming, Li Yaguang, Zhang Jiangjiang, et al. The corrosion evaluation of inter-station accompanying gas pipeline in Tahe Oilfield[J]. Petroleum Drilling Techniques, 2011, 39 (5): 81-84.
[11]
孙海礁, 叶帆. 塔河油田油套管内壁的腐蚀与防护[J]. 腐蚀与防护, 2010, 31(5): 383-386. Sun Haijiao, Ye Fan. Corrosion and protection of oil tubes inwall in Tahe Oilfield[J]. Corrosion & Protection, 2010, 31(5): 383-386.
[12]
API Spec 5CT. Specification for casing and tubing[S]. Michigan: National Association of Corrosion Engineers, 2011: 2-11.
[13]
中华人民共和国国家质量监督检验检疫总局. GB/T 6394—2003: 金 属平均晶粒度测定方法[S]. 北京: 中华人民共和国国家质量监督检 验检疫总局, 2003: 4-9. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. GB/T 6394—2003: Metal-methods for estimating the average grain size[S]. Beijing: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, 2003: 4-9.
[14]
赵文娜, 王宇宾, 张烨. 高温地面交联酸体系研究及其现场应用[J]. 科学技术与工程, 2013, 13(8): 2191-2193. Zhao Wenna, Wang Yubin, Zhang Ye. Study and application of the ground cross-linked acid with high-temperature resistance [J]. Science Technology and Engineering, 2011, 32(3): 193-195.
[15]
曹楚南. 腐蚀电化学原理[M]. 北京: 化学工业出版社, 2004, 55-77. Cao Chunan. The corrosion electrochemistry principle[M]. Beijing: Chemical Industry Press, 2004, 55-77.
[16]
吴剑. 不锈钢的腐蚀破坏与防蚀技术——(二)缝隙腐蚀[J]. 腐蚀与防 护, 1997, 18(2): 41-48. Wu Jian. Corrosion damage and corrosion of stainless steel: (b) The crevice corrosion[J]. Corrosion & Protection, 1997, 18(2): 41-48.
