惠记庄,焦生杰,邹亚科,等.钣金型液力变矩器内部流场的分析[J].长安大学学报:自然科学版,2009,29(2):107-110.HUI Ji-zhuang, JIAO Sheng-jie, ZOU Ya-ke, et al. Analysis on flow field of fabrication hydraulic torque converter[J].Journal of Chang’an University: Natural Science Edition, 2009, 29(2): 107-110.(in Chinese)
[2]
FLACK R, BRUN K.Fundamental analysis of the secondary flows and jet-wake ina torque conveter pump, Part II: flow in curved stationary passage and combined flows[J]. Journal of Fluids Engineering, 2005, 127(1): 75-82.
[3]
DONG Ying-fei, LAKSHMINARAYANA B. Rotating probe measurements of the pump passage flow field in an automotive torque converter[J]. Journal of Fluids Engineering, 2001, 123(1): 81-91.
[4]
KRAUS O, FLACK R, HABSIEGER A, et al. Periodic velocity measurements in a wide and lagre radius ratio automotive torque converter at the pump/turbine interface[J]. Journal of Fluids Engineering, 2005, 127(2): 308-316.
[5]
王 欢,吴光强,冀海燕.超扁平化液力变矩器泵轮流场主流特征分析[J].江苏大学学报:自然科学版,2009,30(5):463-466.WANG Huan, WU Guang-qiang, JI Hai-yan. Main flow features analysis on impeller of super flat automotive torque converter[J]. Journal of Jiangsu University: Natural Science Edition, 2009, 30(5): 463-466.(in Chinese)
[6]
魏良武,魏 杰,汪建华.液力变矩器总成点固焊焊接变形有限元分析[J].电焊机,2004,34(9):42-44.WEI Liang-wu, WEI Jie, WANG Jian-hua. Finite element analysis of welding distortion in tack welding of hydraulic torque convertor assembly[J]. Electric Welding Machine, 2004, 34(9): 42-44.(in Chinese)
[7]
王宏卫.钣金冲焊型双涡轮液力变矩器的研制[J].工程机械,2002,33(5):45-47.WANG Hong-wei. Development of fabricated twin turbine hydraulic torque converters[J]. Construction Machinery and Equipment, 2002, 33(5): 45-47.(in Chinese)
[8]
赵 罡,马文星,周 平.反求工程技术在液力传动中的应用研究[J].液压气动与密封,2006,30(1):26-28.ZHAO Gang, MA Wen-xing, ZHOU Ping. The application research on converse engineering technique in hydrodynamic transmission[J]. Hydraulics Pneumatics and Seals, 2006, 30(1): 26-28.(in Chinese)
[9]
EJIRI E, KUBO M. Performance analysis of automotive torque converter elements[J]. Journal of Fluids Engineering, 1999, 121(2): 266-275.
[10]
刘春宝,马文星,朱喜林.液力变矩器三维瞬态流场计算[J].机械工程学报,2010,46(14):161-166.LIU Chun-bao, MA Wen-xing, ZHU Xi-lin. 3D-transient calculation of internal flow field for hydrodynamic torque converter[J]. Journal of Mechanical Engineering, 2010, 46(14): 161-166.(in Chinese)
[11]
DONG Yu, VAMSHI K, PRADEEP A, et al. Torque converter CFD engineering, Part I: torque ratio and k factor improvement through stator modifications[J]. Society of Automotive Engineer, 2002, 123(1): 83-90.
[12]
严 鹏,吴光强.液力变矩器性能分析[J].同济大学学报:自然科学版,2004,32(11):1504-1507.YAN Peng, WU Guang-qiang. Performance investigation of torque converter[J]. Journal of Tongji University: Natural Science, 2004, 32(11): 1504-1507.(in Chinese)
[13]
刘 悦,刘春宝,何大志,等.液力变矩器轴向载荷三维流场的数值计算[J].机械设计与研究,2011,27(1):42-44.LIU Yue, LIU Chun-bao, HE Da-zhi, et al. Three-dimensional flow filed numerical calculation of axial load in a torque converter[J]. Machine Design and Research, 2011, 27(1): 42-44.(in Chinese)
[14]
袁生杰,刘艳芳,石传龙,等.液力变矩器内部流场的三维数值模拟[J].工程机械,2011,42(7):35-42.YUAN Sheng-jie, LIU Yan-fang, SHI Chuan-long, et al. 3-D numerical simulation of inner flow field for hydraulic torque convertor[J]. Construction Machinery and Equipment, 2011, 42(7): 35-42.(in Chinese)
[15]
惠记庄,邹亚科.液力变矩器性能实验台的研究[J].起重运输机械,2007(12):53-55.HUI Ji-zhuang, ZOU Ya-ke. Research of test bench for hydraulic torque converter performance[J].Hoisting and Conveying Machinery, 2007(12): 53-55.(in Chinese)
[16]
鲁统利,葛安林,张宏坤,等.液力变矩器性能试验台油温自动控制系统研制[J].农业机械学报,2000,31(4):95-102.LU Tong-li, GE An-lin, ZHANG Hong-kun, et al. Research on a temperature auto control system of motorcar torque converter test-bed[J]. Transactions of the Chinese Society for Agricultural Machinery, 2000, 31(4): 95-102.(in Chinese)
[17]
GB/T 7680―2005,液力变矩器性能试验方法[S].GB/T 7680―2005, torque converters-methods of performance tests[S].(in Chinese)
[18]
刘振军,秦大同,胡建军,等.轿车用液力变矩器性能试验分析[J].重庆大学学报:自然科学版,2002,25(2):103-105,119.LIU Zhen-jun, QIN Da-tong, HU Jian-jun, et al. Testing study on hydraulic torque converter for car[J]. Journal of Chongqing University: Natural Science Edition, 2002, 25(2): 103-105, 119.(in Chinese)
[19]
刘 悦,马文星,刘春宝,等.综合式液力变矩器内特性的计算与分析[J].吉林大学学报:工学版,2008,38(1):70-74.LIU Yue, MA Wen-xing, LIU Chun-bao, et al. Calculation and analysis of internal characteristics of torque converter-coupling[J]. Journal of Jilin University: Engineering and Technology Edition, 2008, 38(1): 70-74.(in Chinese)
[20]
刘宗其,李志远,夏光.基于反求技术的液力变矩器涡轮叶片设计[J].交通运输工程学报,2014,14(3):65-72.LIU Zong-qi, LI Zhi-yuan, XIA Guang. Design of turbine blades of torque converter based on reverse technology[J]. Journal of Traffic and Transportation Engineering, 2014, 14(3): 65-72.(in Chinese)
[21]
徐信芯,焦生杰,顾海荣,等.旋挖钻机钻杆耦合振动与减振研究[J].中国公路学报,2014,27(9):119-126.XU Xin-xin, JIAO Sheng-jie, GU Hai-rong,et al. Research on coupled vibration and reducing vibration of drillstring for rotary drilling rig[J]. China Journal of Highway and Transport, 2014, 27(9): 119-126.(in Chinese)
