| [1] | 王 莹，肖 峰.电炮原理[M]. 北京:国防工业出版社，1995. WANG Ying， XIAO Feng. The physics of electric launch[M]. Beijing: National Defense Industry Press，1995.
|
| [2] | RUTBERG P G， KUMKOVA I I， SHVETSOV G A， et al. New steps in EML research in Russia[C]//The 14th International Symposium on EML Technology.Victoria， BC:IEEE， 2008:10-13.
|
| [3] | LYU Qing’ao， LI Zhiyuan， LEI Bin， et al. Review on the technology characteristics and the military applicaion of railgun[C]//The 14th International Symposium on EML Technology.Victoria， BC:IEEE， 2008:14-18.
|
| [4] | HAN Yongxia， LIN Fuchang， DAI Ling， et al. Analysis of electric parameters of a PPS system and their influence on muzzle velocity in EMG[C]//The 14th International Symposium on EML Technology.Victoria， BC:IEEE， 2008:31-35.
|
| [5] | SHI Zhengjun， YU Xinjie. Two-objective optimization design for pulsed power supply[C]//The 14th International Symposium on EML Technology. Victoria， BC:IEEE， 2008:36-40.
|
| [6] | JULIAN A L， BLACK J H， MAIER W B. Power supply design for high voltage capacitor discharge railgun supply using thyristors[C]//The 14th Iinternational Symposium on EML Technology. Victoria， BC:IEEE， 2008:41-45.
|
| [7] | 周 媛， 严 萍. 脉冲成形网络参数对轨道型电磁驱动系统效率的影响[J]. 强激光与粒子束，2010，22(3):13-19. ZHOU Yuan， YAN Ping. Effect of pulse forming network parameters on efficiency of electromagnetic launch system[J]. High Power Laser and Particle Beams， 2010， 22(3): 13-19.
|
| [8] | DONG Jiannian， ZHANG Jun， LI Jun，et al. The 100 kJ modular pulsed power units for railgun[J]. IEEE Transactions on Plasma Science， 2011，39(1):275-278.
|
| [9] | LI Jun，WANG Yongfeng.Experimental results from pseudoliquid armatures launched by two-turn railgun[J]. IEEE Transactions on Plasma Science， 2011，39(1):80-82.
|
| [10] | 杨玉东，王建新.电容式电磁炮电源电路的设计与仿真[J]. 高压电器，2008，44(5):435-437. YANG Yudong， WANG Jianxin. Design and simulation of power source for capacitive EM gun[J]. High Voltage Apparatus， 2008，44(5):435-437.
|
| [11] | 陈庆国，张海燕.电容器储能型轨道电磁炮的理论分析与动态仿真[J]. 电机与控制学报，2006，10(1):23-26. CHEN Qingguo， ZHANG Haiyan. The circuit theory analysis and dynamic simulation for the capacitor drived railgun[J]. Electrical Machines and Control， 2006 ，10(1):23-26.
|
| [12] | 彭 波， 林福昌. 储能电容器组保护电感结构与保护方法的研究[J]. 高压电器，2012，48(6):48-52. PENG Bo， LIN Fuchang. Protection inductor structure and protection methods for pulsed capacitor banks[J]. High Voltage Apparatus， 2012，48(6):48-52.
|
| [13] | 孟绍良， 贾保明. 用于电热化学发射试验的脉冲电源系统[J]. 弹道学报. 2004， 16(1): 86-90. MENG Shaoliang， JIA Baoming. Setup of pulsed power system for electrothermal-chemical launcher reserch[J]. Journal of Ballistics，2004， 16(1): 86-90.
|
| [14] | SITZMANA A， SURLS D， MALLICK J. Design， construction and testing of an inductive pulsed-power supply for a small railgun[J]. IEEE Trans. on Magnetics， 2007，43(1): 270-272.
|
| [15] | DEDIE P， BROMMER V， SCHARNHOLZ S. Twenty-stage toroidal XRAM generator switched by countercurrent thyristors[J]. IEEE Transactions on Plasma Science， 2011， 39(1): 263-267.
|
| [16] | DEDIE P， SCHARNHOLZ S， BROMMER V. ICCOS counter-current thyristor high-power opening switch for currents up to 28 kA[J]. IEEE Transactions on Plasma Science， 2005， 33(4): 1235-1239.
|
| [17] | 陈志强.导轨炮负载特性的仿真和试验研究[D]. 西安：西安交通大学， 2011. CHEN Zhiqiang. Simulation and experimental study of railgun’s load characteristic[D]. Xi’an: Xi’an Jiaotong University，2011.
|
| [18] | 于 群， 曹 娜. MATLAB/Simulink电力系统建模与仿真[M]. 北京:机械工业出版社，2011. YU Qun， CAO Na. Power system modeling and simulation based on MATLAB/Simulink[M]. Beijing:Mechanical Industry Press， 2011.
|
| [19] | 章 程， 方 志. 基于Simulink的介质阻挡放电的仿真[J]. 高压电器，2007，43(3):218-221. ZHANG Cheng， FANG Zhi. Simulation of dielectric barrier discharge using Simulink[J]. High Voltage Apparatus， 2007，43(3):218-221.
|
| [20] | 马朝华， 杨育霞. 基于MATLAB/Simulink的CVT铁磁谐振过程的仿真研究[J]. 高压电器，2007，43(3):209-211. MA Zhaohua， YANG Yuxia. Simulation of CVT’S ferroresonance process based on MATLAB/Simulink[J]. High Voltage Apparatus， 2007，43(3):209-211.
|
