全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
高压电器  2015 

多回路土壤直埋高压电缆温度场建模与载流量计算

DOI: 10.13296/j.1001-1609.hva.2015.10.010, PP. 63-69

Keywords: 土壤直埋电缆,导体温度,叠加原理,载流量计算,有限元法

Full-Text   Cite this paper   Add to My Lib

Abstract:

笔者研究了一种简单快捷的多回路土壤直埋电缆温度场及载流量的计算方法,导体温度作为判断电缆运行电流是否达到载流量的依据,是笔者的重点论述内容。对于多回路敷设的土壤直埋电缆,文中采用叠加原理建立导体温度计算模型,将每根电缆导体温度分为外部环境决定的初始温度、自身损耗产生的温升和其他电缆热源引起的导体温升3部分。综合运用解析法和有限元法对这3部分进行理论分析与建模,推导出导体温度计算公式。在此基础上进行了多回路土壤直埋电缆载流量计算与优化,并通过计算实例验证了文中所建电缆导体温度计算模型的准确性和实用性。

References

[1]  刘 刚,雷成华. 提高单芯电缆短时负荷载流量的试验分析[J]. 高电压技术,2011,37(5):1288-1293. LIU Gang,LEI Chenghua. Experimental analysis on increasing temporary ampacity of single-core cable[J]. High Voltage Engineering,2011,37(5):1288-1293.
[2]  ANDERS G J. Rating of electric power cables: Ampacity computations for transmission, distributions and industrial applications[M]. New York, USA: McGraw Hill IEEE Press,1997.
[3]  雷 鸣,刘 刚,赖育庭,等. 采用Laplace方法的单芯电缆线芯温度动态计算[J]. 高电压技术,2010,36(5):1150-1154. LEI Ming,LIU Gang,LAI Yuting,et al. Dynamic calculation of core temperature of single core cables using Laplace method[J]. High Voltage Engineering,2010,36(5): 1150-1154.
[4]  杨延明. 基于有限元法的电力电缆载流量计算[D]. 哈尔滨:哈尔滨理工大学,2012. YANG Yanming. Power cable ampacity calculation based on the finite element method[D]. Harbin: Harbin University of Science and Technology,2012.
[5]  雷成华,刘 刚,李欣豪. BP神经网路模型用于单芯电缆导体温度的动态计算[J]. 高电压技术,2011,37(1):184-189. LEI Chenghua,LIU Gang,LI Xinhao. Dynamic calculation of conductor temperature of single-core cable using BP neural network[J]. High Voltage Engineering,2011,37(1): 184-189.
[6]  IEC 60287-3-1―1995 Calculation of the current rating of electric cables Part 3: Section on operating conditions Section 1: Reference operation conditions and section of cable type[S].1995.
[7]  FRANCISCO G J. Effects of backfilling on cable ampacity analyzed with the finite element method[J]. IEEE Transactions on Power Delivery,2008,23(2):537-543.
[8]  郑雁翎,王 宁,李洪杰,等. 电力电缆载流量计算的研究与发展[J]. 电线电缆,2010(2):4-9. ZHENG Yanling,WANG Ning,LI Hongjie,et al. Study and progress of the ampacity of power cables[J]. Electric & Wire Cable,2010(2):4-9.
[9]  IEC 602872121―2012 Calculation of the current rating of electric cables Part 1: Current rating equations (100% load factor) and calculation of losses Section 1: General[S]. 2012.
[10]  段佳冰,尹成群,吕安强,等. 基于IEC60287和有限元法的高压海底电缆温度场分析方法[J]. 高压电器,2014,50(1):1-6. DUAN Jiabing,YIN Chengqun,LYU Anqiang,et al. Analysis method for high voltage submarine cable based on IEC 60287 and finite method[J]. High Voltage Apparatus,2014,50(1):1-6.
[11]  刘 刚,雷成华,刘毅刚. 根据电缆表面温度推算导体温度的热路简化模型暂态误差分析[J]. 电网技术,2011,35(4):212-217. LIU Gang,LEI Chenghua,LIU Yigang. Analysis on transient error of simplified thermal circuit model for calculating conductor temperature by cable surface temperature[J]. Power System Technology,2011,35(4):212-217.
[12]  雷 鸣. 依据电缆表皮温度准确计算单芯高压电缆线芯温度的理论及实验研究[D]. 广州:华南理工大学,2011. LEI Ming. Theoretical and experimental study on accurate calculation of single-core high-voltage cable core temperature based on skin temperature[D]. Guangzhou: South China University of Technology,2011.
[13]  邢 雅,侯 ?,杨宇琦,等. 基于分布式光纤测温系统的单芯电缆瞬态温度场数值计算[J]. 电线电缆,2013(6):7-11. XIN Ya,HOU Zhe,YANG Yuqi,et al. Numerical calculation of the transient temperature field of single-core power cable based on distributed temperature sensing[J]. Electric & Wire Cable,2013(6):7-11.
[14]  梁永春,王忠杰,刘建业,等. 排管敷设电缆群温度场和载流量数值计算[J]. 高电压技术,2010,36(3):763-768. LIANG Yongchun,WANG Zhongjie,LIU Jianye,et al. Numerical calculation of temperature field and ampacity of cables in ducts[J]. High Voltage Engineering,2010,36(3): 763-768.
[15]  梁永春,闫彩红,赵 静,等. 排管敷设电缆群暂态温度场和短时载流量数值计算[J]. 高电压技术,2011,37(4):1002-1007. LIANG Yongchun,YAN Caihong,ZHAO Jing,et al. Numerical calculation of transient temperature field and sort-term ampacity of group of cables in ducts[J]. High Voltage Engineering,2011,37(4):763-768.
[16]  文 红. 提高110 kV单芯高压电缆载流量的可行性分析和计算[D]. 杭州:浙江大学,2007. WEN Hong.Analysis and calculation the possibility of improving the current ampacity of the 110 kV single-core high voltage cables[D]. Hangzhou: Zhejiang University,2012.
[17]  王有元,陈仁刚,陈伟根,等. 基于有限元的XLPE电缆载流量计算及其影响因素分析[J]. 重庆大学学报,2010,33(5):72-77. WANG Youyuan,CHEN Rengang,CHEN Weigen,et al. Calculation of the ampacity of XLPE power cable based on FEM and analysis of the influential factors[J]. Journal of Chongqing University,2010,33(5): 72-77.
[18]  庄小亮,余兆荣,牛海清,等. 日负载系数与10 kV XLPE电缆周期负荷载流量关系的试验研究[J]. 电力自动化设备,2014,34(4):168-172. ZHUANG Xiaoliang,YU Zhaorong,NIU Haiqing,et al. Experimental research of relationship between daily load factor and cyclic ampacity of 10 kV XLPE cable[J]. Electric Power Automation Equipment,2014,34(5):168-172.
[19]  马国栋. 电线电缆载流量[M]. 北京:中国电力出版社,2013. MA Guodong. Electric wire and cable capacity[M]. Beijing:China Electric Power Press,2013.
[20]  梁永春. 高压电力电缆载流量数值计算[M]. 北京:国防工业出版社,2012. LIANG Yongchun. Numerical calculation of ampacity of high voltage cables[M]. Beijing:National Defense Industry Press,2012.
[21]  郑雁翎,仪 涛,张冠军,等. 分散式排管敷设电缆群温度场的流固耦合计算[J]. 高电压技术,2010,36(6):1566-1571. ZHENG Yanling,YI Tao,ZHANG Guanjun,et al. Fluid-solid coupling on temperature field of decentralized pipe cable system[J]. High Voltage Engineering,2010,36(5): 1566-1571.
[22]  陈建生,董海州,吴庆林,等. 虚拟热源法研究坝基裂隙岩体渗漏通道[J]. 岩石力学与工程学报,2005,24(22):4019-4024. CHEN Jiansheng,DONG Haizhou,WU Qinglin,et al. Detection of leakage passage in fissure rock with assumptive heat source method[J]. Chinese Journal of Rock Mechanics and Engineering, 2005,24(22):4019-4024.
[23]  邱关源. 电路[M]. 北京:高等教育出版社,2006. QIU Guanyuan. Electric circuit[M]. Beijing: Higher Education Press,2006.
[24]  梁永春,李延沐,李彦明,等. 利用模拟热荷法计算地下电缆稳态温度场[J]. 中国电机工程学报,2008,28(16):129-134. LIANG Yongchun,LI Yanmu,LI Yanming,et al. Calculation of the static temperature field of underground cables using heat charge simulation method[J]. Proceeding of the CSEE,2008,28(16):129-134.
[25]  赵镇南. 传热学[M]. 北京:高等教育出版社,2002. ZHAO Zhennan. Heat transfer[M]. Beijing:Higher Education Press,2002.
[26]  胡亚才,姜周曙,沈杏云,等. 平壁导热传递函数研究[J]. 浙江大学学报,1998,32(6):761-768. HU Yacai,JIANG Zhoushu,SHEN Xingyun,et al. The study of the transfer function of heat conduction in flat plate[J]. Journal of Zhejiang University,1998,32(6):761-768.
[27]  张 尧,周 鑫,牛海清,等. 单芯电缆热时间常数的理论计算与试验研究[J]. 高电压技术,2009,35(11):2801-2806. ZHANG Yao,ZHOU Xin,NIU Haiqing,et al. Theoretical calculation and experimental research on thermal time constant of single-core cables[J]. High Voltage Engineering,2009,35(11):2801-2806.
[28]  库 克. 有限元分析的概念与应用[M]. 关正西,强洪夫,译.西安:西安交通大学出版社,2007. COOK R D. Concepts and application of finite element analysis[M]. GUAN Zhengxi,QIANG Hongfu,Translated.Xi’an: Xi’an Jiaotong University Press,2007.
[29]  胡仁喜,龙 凯,党沙沙,等. ANSYS 13.0 从入门到精通[M]. 北京:机械工业出版社,2011. HU Renxi,LONG Kai,DANG Shasha,et al. ANSYS13.0 from entry to master[M]. Beijing:China Machine Press,2011.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133