[1] | 王世山,晏坚军,牛 ?,等. 160 kN棒形悬式瓷绝缘子应力分析[J]. 电瓷避雷器,2002(3):3-7. WANG Shishan,YAN Jianjun,NIU Yun,et al. Stress analysis on 160 kN porcelain rod insulator[J]. Insulators and Surge Arresters,2002(3):3-7.
|
[2] | 阎 东,罗 菁,卢 明,等. 支柱绝缘子强度计算方法的探讨[J]. 高电压技术,2006,32(7):123-124. YAN Dong,LUO Jing,LU Ming,et al. Discussion on calculation of strength of post insulator[J]. High Voltage Engineering,2006,32(7):123-124.
|
[3] | 孙 涛,肖汉宁. 棒形支柱瓷绝缘子弯曲应力的有限元仿真分析[J]. 电瓷避雷器,2007(2):19-21. SUN Tao,XIAO Hanning. Simulation analysis of bending str ess of solid core post insulator by finite element method[J]. Insulators and Surge Arresters,2007(2):19-21.
|
[4] | 张 强,常玉娥,蔡成良,等. 支柱瓷瓶静力分析[J]. 湖北电力,2004,28(4):16-17. ZHANG Qiang,CHANG Yu’e,CAI Chengliang,et al. Static’s analysis of support insulator[J]. Hubei Electric Power,2004,28(4):16-17.
|
[5] | 王黎明,汪 创,袁 田,等. 高压直流输电线路耐张串用长棒形悬式瓷绝缘子的机械特性[J]. 高电压技术,2012,38(3):655-662. WANG Liming,WANG Chuang,YUAN Tian,et al. Mechanical characteristics of porcelain long rod suspension insulators for tension strings on HVDC transmission lines[J]. High Voltage Engineering, 2012,38(3):655-662.
|
[6] | 王 敏,李晓红,钟永和. 隔离开关瓷瓶的有限元分析与临界裂纹尺寸计算[J]. 高压电器,2006,42(3):188-189. WANG Min,LI Xiaohong,ZHONG Yonghe. Finite element analysis and critical crack size calculation of porcelain insulator of disconnect switch[J]. High Voltage Apparatus,2006,42(3):188-189.
|
[7] | 邱志斌,姚文军,李慧慧,等. 高压隔离开关支柱瓷绝缘子机械特性研究[J]. 绝缘材料,2013,46(5):37-42. QIU Zhibin,YAO Wenjun,LI Huihui,et al. Mechanical properties study of porcelain post insulator for high voltage disconnector[J]. Insulating Materials,2013,46(5):37-42.
|
[8] | 吴光亚,王昭武,张 锐,等. 1 000 kV交流特高压支柱瓷绝缘子制造技术[J]. 电瓷避雷器,2010(1):1-5. WU Guangya,WANG Zhaowu,ZHANG Rui,et al. The manufacturing technology of post porcelain insulatorfor 1 000 kV AC UHV[J]. Insulators and Surge Arresters,2010(1):1-5.
|
[9] | 闫志业,赵建红. 1 000 kV交流系统用棒形支柱瓷绝缘子研究[J]. 电瓷避雷器,2010(2):12-14. YAN Zhiye,ZHAO Jianhong. Research on rod post porcelain insulators for 1 000 kV AC system[J]. Insulators and Surge Arresters,2010(2):12-14.
|
[10] | 余明宣,王图锹,王长水,等. 车顶用柱式复合绝缘子风载下的试验与分析[J]. 电瓷避雷器,2007(6):9-11. YU Mingxuan,WANG Tuqiao,WANG Changshui,et al. Test and analysis for locomotive polymer post insulator under wind load[J]. Insulators and Surge Arresters,2007(6):9-11.
|
[11] | 彭苏华. 棒形支柱瓷绝缘子应力分布的数值模拟及破坏机理分析[D]. 长沙:湖南大学,2013.
|
[12] | 郑佳艳. 动态风作用下悬垂绝缘子串风偏计算研究[D].重庆:重庆大学,2006.
|
[13] | 张艳玲. 高压输电线绝缘子串风偏计算模型的研究[D].太原:太原理工大学,2012.
|
[14] | 温作铭. 基于流体力学的覆冰地区用复合绝缘子伞裙结构研究[D]. 重庆:重庆大学,2007.
|
[15] | 张志劲,黄海舟,蒋兴良,等. 基于流体力学的不同型式绝缘子覆冰增长过程分析[J]. 电工技术学报,2012,27(10):35-43. ZHANG Zhijin,HUANG Haizhou,JIANG Xingliang,et al. Analysis of ice growth on different type insulators based on fluid dynamics[J]. Transactions of China Electrotechnical Society,2012,27(10):35-43.
|
[16] | 李海波. 基于流体力学原理的悬垂绝缘子串积污特性研究[D]. 重庆:重庆大学,2010.
|
[17] | YANG Xiaolei,LI Yawei,ZHANG Qiaogen,et al. Influences of wind velocities on the contamination behavior of two outer-rib type and under-rib type outdoor insulators[C]//Annual Report Conference on Electrical insulation and Dielectic Phenomena.Shenzhen:IEEE,2013:382-386.
|
[18] | 刘学忠,高 超,邓显波,等. 高速气流对绝缘子表面放电特征的影响[J]. 电工技术学报,2010,25(12):16-21. LIU Xuezhong,GAO Chao,DENG Xianbo,et al. Influence of high-speed airflow on surface discharge characteristics of insulator[J]. Transactions of China Electrotechnical Society,2010,25(12):16-21.
|
[19] | LIU X Z,WU Z W,ZHU Y Z,et al. Numerical simulation of airflow pressure distributions along insulator surface for electric high-speed locomotive[C]//8th International Conference on Properties and Applications of Dielectric Materials. Bali:IEEE,2006:526-529.
|
[20] | 陶文铨. 数值传热学[M]. 西安:西安交通大学出版社,2001.
|
[21] | 郎培英,黄 涛,梁义明. 支柱瓷绝缘子弯扭能力与声速关系的研究[J]. 高压电器,2009,45(3):120-123. LANG Peiying,HUANG Tao,LIANG Yiming. Research on relationships of bending resistance and twisting resistance and sound velocity of post insulators[J]. High Voltage Apparatus,2009,45(3):120-123.
|
[22] | SHABANY Y. 传热学:电力电子器件热管理[M]. 北京:机械工业出版社,2013.
|