[1] | 中国气象局风能太阳能资源评估中心.中国风能资源评估2009[M]. 北京:气象出版社,2010:37. Center for Wind and Solar Energy Resources Assessment.Wind energy resource assessment of China(2009)[M]. Beijing: China Meteorological, 2010:37.
|
[2] | 国家发展和改革委员会能源研究所.中国风电发展路线图2050[R]. 昆明,云南:现代物业杂志社,2011. Energy Research Institute of National Development and Reform Committee. Road map of China wind power development 2050[R]. Kunming, Yunnan:Modern Property Management,2011.
|
[3] | 王天施,苑 舜. 风力发电对电网的影响及对策[J]. 高压电器,2010,46(8):89-92. WANG Tianshi,YUAN Shun. Effects of wind power generation on power grid with countermeasures[J]. High Voltage Apparatus,2010,46(8):89-92.
|
[4] | 吴家梁,李成峰. 海上风力发电机组设计[M]. 北京:化学工业出版社,2012:68. WU Jialiang,LI Chengfeng. Design of offshore wind turbine generator[M]. Beijing:Chemical Industry Press,2012:68.
|
[5] | 陈洪武,陈红生,张亦黄,等. 海洋大气中的风力发电机绝缘系统耐候性试验研究[J]. 绝缘材料,2012,45(2):23-25. CHEN Hongwu,CHEN Hongsheng,ZHANG Yihuang,et al. Weathering test of wind turbine insulation system in marine atmosphere[J]. Insulating Materials,2012,45(2):23-25.
|
[6] | 陈 健,王洪波,马贤好,等. 风力发电机绝缘系统耐盐雾性能研究[J]. 绝缘材料,2011,44(5):43-45. CHEN Jian,WANG Hongbo,MA Xianhao,et al. Salt spray resistance of wind turbine generator insulation system[J]. Insulating Materials,2011,44(5):43-45.
|
[7] | 潘庆辉,张小俊. 双馈风力发电机线圈绝缘冷热循环试验研究[J]. 东方电机,2010(1):72-75. PAN Qinghui,ZHANG Xiaojun. Experimental study on thermal cycling of doubly-fed wind generator coil[J]. Dongfang Electrical Machine,2010(1):72-75.
|
[8] | 李强军,姜其斌,陈红生,等. 1.5 MW直驱式风力发电机绝缘系统的研究[J]. 绝缘材料,2009,42(3):10-13. LI Qiangjun,JIANG Jibin,CHEN Hongsheng,et al. Research of insulation system for direct-drive wind turbine[J]. Insulating Materials,2009,42(3):10-13.
|
[9] | DING Xiaoxia,LIU Xuezhong,ZHANG Jianjun,et al. Study on multi-factor aging characteristics of stator insulation for wind turbine generator[C]//10th International Conference on Properties and Applications of Dielectric Materials Bangalore.India:[s.n.],2012:1-4.
|
[10] | LIU Xuezhong,ZHANG Tianlong,BAI Yonggang,et al. Experimental research on stator insulation system of 5 MW offshore Wind turbine generator under simulated Marine environments[C]//2013 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP).Shenzhen,China:IEEE,2013:52-55.
|
[11] | 乐 波,张晓红,卢伟胜,等. 电机定子线圈绝缘多因子老化特征的研究[J]. 高电压技术,2000,26(2):3-7. YUE Bo,ZHANG Xiaohong,LU Weisheng,et al. Study on multi-factor aging characteristics of motor stator windings[J]. High Voltage Engineering,2000,26(2):3-7.
|
[12] | 何景彦,吴广宁,高 波,等. 基于介质损耗分析研究变频电机绝缘老化特性[J]. 高压电器,2008,44(3):243-245. HE Jingyan,WU Guangning,GAO Bo,et al. Study on aging characteristics of insulation in inverter-fed traction motor based on dielectric loss[J]. High Voltage Apparatus,2008,44(3):243-245.
|
[13] | LIU Xuezhong,ZHAO Xiang,WANG Ying,et al. Long-term aged performances of stator insulation for wind turbine generator under repeat pulse voltage[C]//Proceedings of 2011 International Conference on Electrical Insulating Materials (ISEIM).Kyoto,Japan:[s.n.],2011:105-108.
|
[14] | 国家海洋基础信息网络服务系统[DB/OL].http://wdc-d.coi.gov.cn/index.html National Marine Basic Information Network Service System,2014-11-14.
|
[15] | 中国气象科学数据共享服务网. 全球海平面气温资料数据集[DB/OL]. www.escience.gov.cn/metdata/page/index.html,2014-11-14.
|
[16] | GB/T 2423.22―2002 电工电子产品环境试验 第2部分:试验方法 试验N:温度变化[S].2002. GB/T 2423.22―2002 Environmental testing for electric and electronic products―Part 2: Test methods―Test N: Change of temperature[S].2002.
|
[17] | GB/T 2423.3―2006电工电子产品环境试验 第2部分:试验方法 试验Cab:恒定湿热试验[S].2006. GB/T 2423.3―2006 Environmental testing for electric and electronic products―Part 2: Testing method―Test Cab: Damp heat, steady state [S].2006.
|
[18] | GB/T 2423.17―2008 电工电子产品环境试验 第2部分:试验方法 试验Ka:盐雾[S].2008. GB/T 2423.17―2008 Environmental testing for electric and electronic products―Part 2: Test methods―Test Ka: Salt mist [S].2008.
|
[19] | LIU Xuezhong,BAI Yonggang,WANG Xiaomei,et al.Evaluation method of insulation system for wind turbine generator based on accelerated multi-factor ageing test[C]//IEEE Conference on Electrical Insulation and Dielectric Phenomena.Shenzhen,China:IEEE,2013: 56-59.
|