Carrato P J,Litehiser J J.Characterization of design ground motion for Central And Eastern United States //Transactions of the 18th International Conference on Structural Mechanics in Reactor Technology (SMiRT 18), K02-4, 2005.
[2]
US Nuclear Regulatory Commission Regulatory Guide 1.60, revision 1. Design response spectra for seismic design of nuclear power plants[S]. 1973.
[3]
Ostadan F. Soil-structure interaction analysis including ground motion incoherency effects//Transactions of the 18th International Conference on Structural Mechanics in Reactor Technology (SMiRT 18), K04-7, 2005.
[4]
Malushte S R,Whittaker A S.Survey of past isolation applications in nuclear power plants and challenges to industry/regulatory acceptance//Transactions of the 18th International Conference on Structural Mechanics in Reactor Technology (SMiRT 18), K10-7,2005.
[5]
Forni M. Seismic isolation of nuclear power plants//Proceedings of the "Italy in Japan 2011" Initiative Science, Technology and Innovation, 2011.
[6]
Forni M,Poggianti A,Bianchi F,et al. Seismic isolation of the Iris nuclear plant//Proceedings of the 2009 ASME Pressure Vessel and Piping Conference, PVP 2009, Prague, July 26-30, 2009.
[7]
Aiken I D, Kelly J M,Tajirian F F.Mechanics of low shape factor elastomeric seismic isolation bearings.Report No. UCB/EERC-89/13, University of California at Berkeley,1989.
[8]
ASCE Standard 4. Seismic analysis of safety-related nuclear structures and commentary[S].Published by the American Society of Civil Engineers,1998.
[9]
ASCE Standard 7. Minimum design loads for buildings and other structures [S].Published by the American Society of Civil Engineers, 2002.
[10]
FEMA 368 and 369. NEHRP 2000 Recommended provisions and commentary for seismic regulations for new buildings and other structures[S].Published by the US Federal Emergency Management Agency (Now Part of the Department of Homeland Securities),2001.
[11]
FEMA 450 and 451.NEHRP 2003 Recommended provisions and commentary for seismic regulations for new buildings and other structures[S].Published by the US Federal Emergency Management Agency (Now Part of the Department of Homeland Securities),2004.
[12]
Shenton H W. Guidelines for pre-qualification, prototype and quality control testing of seismic isolation systems.Report NISTIR 5800, Structures Division, Building and Fire Research Laboratory, National Institute of Standards and Technology, Gaithersburg, MD, USA 1996.
