丁向奎. 低周往复荷载下290厚砌块整浇墙剪切破坏模式试验研究[D]. 哈尔滨:哈尔滨工业大学, 2011:49-50. DING Xiangkui. Experimental study on shear failure mode of 290 concrete-block casting wall under low-cyclic loading[D]. Harbin: Harbin Institute of Technology , 2011:49-50.(in Chinese)
[2]
李利刚.低周往复荷载下290厚砌块整浇墙弯曲破坏模式试验研究[D].哈尔滨:哈尔滨工业大学,2011:51-52. LI ligang. Experimental study on bending failure mode of 290 concrete-block casting wall under low-cyclic loading[D]. Harbin: Harbin Institute of Technology, 2011:51-52. (in Chinese)
[3]
Paulay T, and Priestley M J N. Seismic design of reinforced concrete and masonry buildings[M]. New York: Wiley-Interscience,1992.
[4]
Drysdale R, Hamid A. Masonry structures-behavior and design. First Canadian Ed. Mississauga (ON, Canada): Canada Masonry Design Centre, 2005.
[5]
Tomazevic M, Marjana Lutman, and Ljubo Petkovic. Seismic behavior of masonry walls: experimental simulation[J]. the Journal of Structural Engineering, 1996, 122(9):1040-1047.
[6]
Hose Y, Seible F. Performance evaluation database for concrete bridge components and systems under simulated seismic loads. PEER report 1999/11. Berkley (USA): Pacific Earthquake Engineering Research Center, College of Engineering, University of California; 1999.
[7]
Chopra A. Dynamics of structures: Theory and application to earthquake engineering. 2nd ed. Englewood Cliffs (NJ, USA): Prentice Hall, Inc.: 2000.
[8]
Shedid, M T, Wael W. El-Dakhakhni,Robert G. Drysdale. Behavior of fully grouted reinforced concrete masonry shear walls failing in flexure: analysis[J]. Engineering Structures, 2009, 134(11): 2032-2044.
[9]
Miha Tomazevic, Marjana Lutman and Ljubo Petkovie. Seismic behavior of masonry wall: experimental simulation[J]. Journal of Structural Engineering, 1996,122(9):1040-1047.
[10]
陈君军.低周往复荷载下290配筋砌块砌体剪切破坏模式试验研究[D]. 哈尔滨:哈尔滨工业大学,2013:45-49. CHEN Junjun. Experimental study on shear behavior of 290 reinforced masonry shear walls under quas-static cyclic test[D]. Harbin: Harbin Institute of Technology, 2013:44-49.(in Chinese)
[11]
Gosain N K,Brown R H,Jirsa J O.Shear requirements for load and reversals on RC members[J].Journal of the Structural Division,ASCE,1977,103(7):1461-1476.
