黄茂松, 曹 杰. 隧道地震响应简化分析与动力离心试验验证[J]. 岩石力学与工程学报, 2010, 29(2): 271-280. HUANG Maosong, CAO Jie. Simplified analysis of tunnel earthquake response and centrifuge modelling calibration[J]. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(2): 271-280.(in Chinese)
[2]
NG C W W, Xu G M. The Hong Kong geotechnical centrifuge[C]// Proc. of 3rd International Conference on Soft Soil Engineering, Hong Kong, China, 2001, 225-230.
[3]
马军辉. 吊篮刚度对离心机振动台控制特性的影响[D]. 哈尔滨: 哈尔滨工业大学, 2011. MA Junhui. The influence of basket’s stiffness on centrifugal shaker’s control characteristic[D]. Harbin: Harbin Institute of Technology, 2011.(in Chinese)
[4]
罗中宝, 杨志东, 丛大成, 等. 大型液压离心振动台的耦合特性分析[J]. 振动与冲击, 2014, 33(11): 17-25. LUO Zhongbao, YANG Zhidong, CONG Dacheng,et al. Coupling characteristic analysis of a large hydraulic centrifugal shaker[J]. Journal of Vibration and Shock, 2014, 33(11): 17-25.(in Chinese)
[5]
王永志,大型动力离心机设计理论与关键技术研究[D]. 哈尔滨: 中国地震局工程力学研究所, 2013. WANG Yongzhi.Study on the design theory and key technology for large dynamic centrifuge[D]. Harbin: Institute of Engineering Mechanics,China Earthquake Administration, 2013.(in Chinese)
[6]
韩俊伟, 于丽明, 赵 慧, 等. 地震模拟振动台三状态控制的研究[J]. 哈尔滨工业大学学报, 1999, 31(3): 21-28. HAN Junwei, YU Liming, ZHAO Hui, et al. Study of three state controller of seismic simulating shaking table[J]. Journal of Harbin of Institute of Technology, 1999, 31(3): 21-28.(in Chinese)
[7]
包承纲.我国离心模拟试验技术的现状与展望[J]. 岩土工程学报, 1991, 13(6): 92-97. BAO Chenggang. The state and prospect of centrifuge model in China[J]. Chinese Journal of Geotechnical Engineering, 1991, 13(6): 92-97.(in Chinese)
[8]
章为民, 赖忠中, 徐光明. 电液式土工离心机振动台的研制[J]. 水利水运工程学报, 2002, (1): 63-66. ZHANG Weimin, LAI Zhongzhong, XU Guangming. Development of an electro-hydraulic shake table for the centrifuge[J]. Hydro-science and Engineering, 2002, (1): 63-66.(in Chinese)
[9]
张建民, 于玉贞, 濮家骝, 等. 电液伺服控制离心机振动台系统研制[J]. 岩土工程学报, 2004, 26(6): 843-845. ZHANG Jianmin, YU Yuzhen, PU Jialiu, et al. Development of a shaking table in electro-hydraulic servo-control centrifuge[J]. Chinese Journal of Geotechnical Engineering, 2004, 26(6): 843-845.(in Chinese)
[10]
侯瑜京. 土工离心机振动台及其试验技术[J]. 中国水利水电科学研究院学报, 2006, 4(1): 15-22. HOU Yujing. Centrifuge shakers and testing technique[J]. Journal of China Institute of Water Resources and Hydropower Research, 2006, 4(1): 15-22.(in Chinese)
[11]
徐光明, 吴宏伟. 大圆筒岸壁码头的量纲分析和离心模拟[J]. 岩土工程学报, 2007, 29(10): 1544-1552. XU Guangming, WU hongwei. Dimensional analysis and centrifuge modeling of quay wall of large-diameter bottomless cylinders[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(10): 1544-1552.(in Chinese)
[12]
刘晶波, 赵冬冬, 张小波, 等. 地基自由场离心机振动台模型试验研究[J]. 岩土工程学报, 2013, 35(11): 980-987. LIU Jingbo, ZHAO Dongdong, ZHANG Xiaobo, et al. Dynamic centrifuge model tests on an unconfined soil foundation[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(11): 980-987.(in Chinese)
[13]
Wilson D W, Boulanger R W, Feng X, et al. The NEES geotechnical centrifuge at UC Davis[C]// Proc. of the 13th World Conference on Earthquake Engineering. Vancouver. Canada: IEEE Press, 2004. Paper No. 2497.
[14]
Kim N R, Park D S, Shin D H, et al. An 800 g-tonne geotechnical centrifuge at K-water Institute, Korea[C]// Physical Modeling in Geotechnics, London, England, 2014, 175-180.
[15]
Kenji Y, Takuya A, Shunichi H, et al. Centrifuge shaking table tests and FEM analysis of RC pile foundation and underground structure[C]// Prof. of the 15th World Conference on Earthquake Engineering. Lisbon. Portugal, 2012. Paper No. 1630.
[16]
Kutter B. L. Recent advances in centrifuge modeling of seismic shaking[C]// Proc. 3th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, Missouri, America, 1995, Paper No. SOA8.
[17]
Ilankatharan M, & Kutter B. Modeling input motion boundary conditions for simulations of geotechnical shaking table tests[J]. Earthquake Spectra, 2010, 26(2): 349-369.
[18]
Mason H B, Bray J D, Kutter B L, et al. Earthquake motion selection and calibration for use in a geotechnical centrifuge[C]// Proc. 7th International Conference on Physical Modelling in Geotechnics, Zurich, Switzerland, 2010, 2: 361-366.(in Chinese)
