Reinhom A M, Li C Constantinou M C. Experimental and analytical investigation of seismic retrofit of structures with supplemental damping part1-fluid viscous damping devices[R].NCEER-95-0001, New York:State University of New York at Buffalo,1995.
[2]
Taylor D P, Constantinou M C. Test Methodology and procedures for fluid viscous dampers used in structures to dissipate seismic energy[R].North Tonawanda:Taylor Devices,Inc,1994.
[3]
ToongT, Dargush G F.Passive energy dissipation system in structural engineering[R]. New York: State University of New York at Buffalo, 1997.
[4]
Constantinou M C,Symans M D. Experimental and analytical investigation of seismic response of structures with supp;emental fluid viscous dampers[R]. NCEER-92-0032, New York: State University of New York at Buffalo, 1992.
[5]
周 云.黏滞阻尼减震结构设计 [M].武汉:武汉理工大学出版社,2006:15-17. ZHOU Yun.Design method of structures with viscous damper[M].Wuhan: Wuhan University of technology press, 2006:15-17.(in Chinese)
[6]
袁祖强,刘建华. 非牛顿流体幂指式流变模型的试验验证[J].南京化工大学学报.2001, 3(23), 60-62. YUAN Zuqiang,LIU Jianhua.Verification of power-law model for non-newtonian fluid with experiments[J].Journal of Nanjing University of chemical technology. 2001,3(23), 60-62.(in Chinese)
[7]
姜 潮,李 超,陶友瑞.冲压成型板材特性参数的反演方法[J].汽车工程.2012, 4(34), 373-378. JIANG Chao,LI Chao,TAO Yourui.An inverse technique for determining the material property parameters of sheet metal after stamping[J].Automotive Engineering, 2012,4(34), 373-378.(in Chinese)
[8]
Montgomery D C. Design and analysis of experiments 5th edition[M]. USA: Jhno Wile & Sonc Inc, 2005:35-105.
[9]
尹汉锋. 着陆缓冲系统中吸能结构的耐撞性优化[D]. 长沙:湖南大学机械与运载工程学院,2012. YIN Hanfeng.Crashworthiness optimization of energy absorbing structures for landing system[D].Changsha:Hunan University,2012.(in Chinese)
[10]
文 登.某无人机撞网回收系统动力学仿真分析与优化[D]. 长沙:湖南大学机械与运载工程学院,2012. WEN Deng. Dynamical simulation and optimization of net-recovery system for unmanned aerial vehicle (UAV)[D]. Changsha:Hunan University,2012.(in Chinese)
