徐 建. 建筑振动工程手册[M]. 北京:中国建筑工业出版社, 2002. XU Jian. Building vibration engineering manual[M]. Beijing:China Building Industry Press, 2002.(in Chinese)
[2]
徐 建. 隔振设计规范理解与应用[M]. 北京:中国建筑工业出版社, 2009. XU Jian. Understanding and application of vibration isolation design specifications[M]. Beijing:China Building Industry Press, 2002.(in Chinese)
[3]
潘复兰. 古建筑防工业振动的研究[J]. 文物保护与考古科学, 2008, 120(S):104-108. PAN Fulan. Research on anti industrial vibration of ancient architecture[J]. Conservation and Archaeology, 2008, 120(S):104-108.(in Chinese)
[4]
万叶青, 张志胜, 杨先健, 等. 块状基础动态参数分析[J]. 工程抗震与加固改造, 2009, 131(4):19-23. WAN Yeqing, ZHANG Zhisheng, YANG Xianjian, et al. Block-base dynamic parameter analysis[J]. Earthquake Resistant Engineering and Retrofitting, 2009, 131(4):19-23.(in Chinese)
[5]
万海波, 楼京俊, 朱石坚, 等. 柔性基础混合隔振系统建模与控制[J]. 噪声与振动控制, 2012, 120(S):18-22. WAN Haibo, LOU Jingjun, ZHU Shijian, et al. Study on modeling and control design of hybrid vibration isolation system with flexible base[J]. Noise and Vibration Control, 2012, 120(S):18-22.(in Chinese)
[6]
高广运, 张 博, 李 宁. 电子工业厂房微振动测试及数值分析[J]. 勘察科学技术, 2011, (3):51-55. GAO Guangyun, ZHANG Bo, LI Ning. Electronic industrial plant micro-vibration measurement and numerical analysis[J]. Investigation Science and Technology, 2011, (3):51-55.(in Chinese)
[7]
冯军和, 张敏政, 闫维明. 多层选煤厂房的受振层楼板振动分析[J]. 地震工程与工程振动, 2007, 27(2):99-103. FENG Junhe, ZHANG Minzheng, YAN Weiming. Dynamic analysis of floor without machine in multi-story coal preparation factory building[J]. Earthquake Engineering and Engineering Dynamics, 2007, 27(2):99-103.(in Chinese)
[8]
刘晶波, 谷 音, 杜义欣. 一致粘弹性人工边界及粘弹性边界单元[J]. 岩土工程学报, 2006, 28(9):1070-1075. LIU Jingbo, GU Yin, DU Yixin. Consistent viscous-spring artificial boundaries and viscous-spring boundary elements[J]. Chinese Journal of Geotechnical Engineering, 2006, 28(9):1070-1075.(in Chinese)
[9]
HU Mingyi, ZHANG Lingxin. Application of optimization analysis on structure damage identification based on ACO algorithm[J]. Source:Key Engineering Materials, 2011, 506-509, 450:Advanced Design and Manufacture III, ADM2010.
[10]
HU Mingyi, ZHANG Lingxin, LIU Jieping. Structural frequency topology optimization in seismic design based on FEM method[C]//The 14th WCEE, Oct, Beijing, 2008:12-17.
[11]
HU Mingyi, LI Wei, HOU Yuxin. Numerical study on seismic response analysis of reinforced concrete aqueduct strucure[C]//International Symposium on Innovation & Sustainability of Structures in Civil Engineering, November 28-30, 2007, Shanghai, China(No.336).
