Ames R G, Brennan B P. Measurements of the effects of target skin thickness on the impact-initiated energy release from PTFE-Al projectiles[C]//Proceedings of Warheads and Ballistics Classified Symposium. Boston: Naval Surface Warfare Center, 2003.
[2]
Ames R G. Energy release characteristics of impact initiated energetic materials[C]//Proceeding of Materials Research Society Symposium. Boston: Naval Surface Warfare Center, 2006:78-83.
[3]
Cai J, Walley S M, Hunt R J A, et al. High-strain, high-strain-rate flow and failure in PTFE/Al/W granular composites[J]. Materials Science and Engineering A,2008,472:308-315.
[4]
Alexander Y D,Michael N M. Detonation in metal-teflon mechanoactivated composites[C]//Proceedings of The 3th International Detonation Symposium. Norfolk, Virginia:[s.n.], 2006:167-175.
[5]
Osborne D T. The effects of fuel particle size on the reaction of Al/TEFLON mixtures[D]. Texas: Health Sciences Center, Texas Tech University, 2006.
[6]
王海福,刘宗伟,俞为民,等.活性破片能量输出特性实验研究[J].北京理工大学学报,2009,29(8):663-666. Wang Haifu, Liu Zongwei, Yu Weimin, et al. Experimental investigation of energy release characteristics of reactive fragments[J]. Transactions of Beijing Institute of Technology, 2009,29(8):663-666. (in Chinese)
[7]
刘宗伟.活性破片撞击起爆特性及其应用研究[D].北京:北京理工大学机电学院,2009. Liu Zongwei. Research on impact-initiated characteristics of reactive fragments and its application[D]. Beijing: School of Mechatronical Engineering, Beijing Institute of Technology, 2009. (in Chinese)
[8]
阳世清,徐松林,张彤.PTFE/Al反应材料制备工艺及性能[J]. 国防科技大学学报,2008,30(6):39-42. Yang Shiqing, Xu Songlin, Zhang Tong. Preparation and performance of PTFE/Al reactive materials[J]. Journal of National University of Defense Technology, 2008,30(6):39-42. (in Chinese)
[9]
李旭锋.含能破片对模拟战斗部的引爆机理研究[D].南京:南京理工大学机械工程学院,2006. Li Xufeng. Resarch on intiation mechanism of energetic fragments to warheads[D]. Nanjing: School of Mechanical Engineering, Nanjing University of Science and Technology, 2006. (in Chinese)
[10]
Raftenberg M N, Mock W Jr, Kirby G C. Modeling the impact deformation of rods of a pressed PTFE/Al composite mixture[J]. International Journal of Impact Engineering, 2008,35:1735-1744.
[11]
Tham C Y, Tan V B C, Lee H P. Ballistic impact of a KEVLARs helmet: experiment and simulations[J]. International Journal of Impact Engineering, 2008,35:304-318.
