Pater Z. A study of cross wedge rolling process[J]. Journal of Materials Processing Technology,1997, 80-81∶370-375.
[2]
Shu Xuedao, Zhang Kangsheng, Hu Zhenghuan, et al. Factors affecting parameters of force and energy in cross wedge rolling[J]. Journal of Heavy Machinery, 2002,14:29-33.
[3]
束学道,彭文飞,聂广占,等.楔横轧大型轴类件轧制力规律研究[J].塑性工程学报,2009,16(1):102-105,114. Shu Xuedao, Peng Wenfei, Nie Guangzhan, et al. The study of rolling force on forming large-sized shaft-part by cross wedge rolling[J]. Journal of Plasticity Engineering, 2009,16(1):102-105,114. (in Chinese)
[4]
白志斌,任广升,张承鉴.楔横轧变形载荷的计算[J].吉林工业大学学报,1989(3):108-115. Bai Zhibin, Ren Guangsheng, Zhang Chengjian. The calculation of deformation load on cross wedge rolling[J]. Journal of Jilin University of Technology, 1989(3):108-115. (in Chinese)
[5]
胡正寰,张康生.楔横轧零件成形技术与模拟仿真[M].北京:冶金工业出版社,2004. Hu Zhenghuan, Zhang Kangsheng. Technology and simulation that CWR forming parts[M]. Beijing: Publishing House of Metallurgical Industry, 2004. (in Chinese)
[6]
Peng Wenfei, Zhang Kangsheng. Theoretical research of the axial force about cross wedge rolling[J]. Key Engineering Materials, 2010,443:27-32.
[7]
Peng Wenfei, Zhang Kangsheng, Hu Zhenghuan. Analysis of process parameters influence on axial force of cross wedge rolling //Proceedings of 2010 International Conference on Mechanic Automation and Control Engineering. Wuhan, China: MACE 2010 Group, 2010:3756-3760.
[8]
Peng Wenfei, Zhang Kangsheng, Hu Zhenghuan. Analysis of influence parameters on axial movement displacement about cross wedge rolling asymmetric shaft part[J]. Applied Mechanics and Materials, 2010,37-38:141-145.
[9]
黄德政,周建军.不对称轴类件楔横轧工艺与孔型设计[J].汽车科技,1998,6(4):22-29. Huang Dezheng, Zhou Jianjun. Process and pass design of cross wedge rolling asymmetric shaft[J]. Journal of Muto Mobile Science & Technology, 1998,6(4):22-29. (in Chinese)
[10]
彭文飞,张康生,胡正寰.楔横轧非对称轴类件有限元模型分析[J].塑性工程学报,2010,17(2):79-83. Peng Wenfei, Zhang Kangsheng, Hu Zhenghuan. Analysis of finite element model on cross wedge rolling asymmetric shaft-parts[J]. Journal of Plasticity Engineering, 2010,17(2):79-83. (in Chinese)
