全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

大长径比固体火箭发动机旋转发射过程装药结构完整性分析

Keywords: 大长径比发动机,旋转发动机,结构完整性,载荷分析,有限元法

Full-Text   Cite this paper   Add to My Lib

Abstract:

以某防空导弹大长径比双推力固体火箭发动机装药为研究对象,为全面分析导弹旋转发射出筒过程中承受的各类载荷,采用基于三维黏弹性有限元法,对发动机点火出筒过程应力-应变场进行了数值计算.结果表明,内压载荷、轴向过载及角加速度过载是影响装药结构安全的主要载荷因素,装药的凸台后端面是危险部位,悬臂段的轴向过度伸长可能造成通道阻塞现象,可引发内压剧升甚至壳体破坏的危险.提出改进装药工装,防止微裂纹的出现;设置有效的装药悬臂段固定支撑机构;优化发动机燃气通道燃通比等方法优化发动机结构.

References

[1]  Martinm L. Acceleration effects in solid propellant rocket motors, AIAA 1577[R].[S.l.]: AIAA,1998.
[2]  张为华,曹泰岳,万章吉.固体火箭发动机旋转对燃速的影响[J].航空动力学报,1994,9(1):67-71. Zhang Weihua, Cao Taiyue, Wan Zhangji. A study on swirling solid rocket motor[J]. Journal of Aerospace Power, 1994,9(1):67-71. (in Chinese)
[3]  高波,叶定友,侯晓.旋转固体发动机燃烧室燃气湍流流动数值模拟[J].推进技术,1999,20(6):23-27. Gao Bo, Ye Dingyou, Hou Xiao. Numerical simulation of turbulent flow in the combustion chamber of a spinning solid rocket motor[J]. Journal of Propulsion Technology, 1999,20(6):23-27. (in Chinese)
[4]  William A O. Integrated 3-D simulation of propellant rocket, AIAA 2001-3949[R].[S.l.]: AIAA, 2001.
[5]  钟涛,张为华,王中伟.大长径比固体火箭发动机点火瞬态过程数值分析[J].国防科技大学学报,2004,26(6):5-8. Zhong Tao, Zhang Weihua, Wang Zhongwei. Numerical study of ignition transient in large aspect ratio solid rocket motor[J]. Journal of National University of Defense Technology, 2004,26(6):5-8.(in Chinese)
[6]  武晓松,王栋,余陵,等.高速旋转固体火箭发动机的动态燃速特性研究[J].弹道学报,2005,17(2):1-7. Wu Xiaosong, Wang Dong, Yu Ling. The dynamic combustion rate characteristic of solid propellant rocket motor with high speed rotating[J]. Journal of Ballistics, 2005,17(2):1-7.(in Chinese)
[7]  沈伟,黄卫东,杨欣毅.超期贮存固体火箭发动机使用性能评估[J].航空动力学报,2010,25(10):2340-2345. Shen Wei, Huang Weidong, Yang Xinyi. Ecaluation of performance of an over-storage solid rocket motor[J]. Journal of Aerospace Power, 2010,25(10):2340-2345. (in Chinese)
[8]  蔡国飚,田辉.旋转对固体火箭发动机的影响[J].推进技术,1999,20(1):11-15. Cai Guobiao, Tian Hui. Spinning effect on solid rocket motor[J]. Journal of Propulsion Technology, 1999,20(1):11-15. (in Chinese)
[9]  于洋,王宁飞,张平.温度载荷下装药内外径比和长径比对结构完整性影响的规律研究[J].航空动力学报,2007,22(9):1565-1568. Yu Yang,Wang Ningfei,Zhang Ping. Research on influence of diameter ratio and length-diameter ratio on structural integrity of solid propellant under temperature loading[J]. Journal of Aerospace Power,2007,22(9):1565-1568. (in Chinese)

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133