陈宇东,裴春艳,潘淑华,等.整车环境下商用车驾驶室模态刚度灵敏度[J].吉林大学学报:工学版,2011,41(4):1025-1028. Chen Yudong, Pei Chunyan, Pan Shuhua, et al. Modal stiffness sensitivity of commercial vehicle cab under full vehicle environment[J]. Journal of Jilin University: Engineering and Technology ed, 2011,41(4):1025-1028. (in Chinese)
[2]
范文杰,范子杰,桂良进,等.多工况下客车车架结构多刚度拓扑优化设计研究[J] .汽车工程,2008,30(6):531-533. Fan Wenjie, Fan Zijie, Gui Liangjin, et al. Multi-stiffness topology optimization of bus frame with multiple loading conditions[J]. Automotive Engineering, 2008,30(6):531-533. (in Chinese)
[3]
杨志军,吴晓明,陈塑寰,等.多工况约束下客车顶棚拓扑优化[J].吉林大学学报:工学版,2006,36(1):12-15. Yang Zhijun, Wu Xiaoming, Chen Suhuan, et al. Static topological optimization of bus roof under multiple loading cases[J] . Journal of Jilin University: Engineering and Technology ed, 2006,36(1):12-15. (in Chinese)
[4]
徐岩,杨志军,陈宇东,等.载货汽车发动机飞轮壳加强筋布置的优化设计[J].吉林大学学报:工学版,2005,35(4):451-456. Xu Yan, Yang Zhijun, Chen Yudong, et al. Layout optimization of stiffeners for engine\'s flywheel housing of trucks[J]. Journal of Jilin University of Technology: Engineering and Technology ed, 2005,35(4):451-456. (in Chinese)
[5]
上官文斌,蒋翠翠,潘孝勇.汽车悬架控制臂的拓扑优化与性能计算[J].汽车工程,2008,30(8):709-712. Shangguan Wenbin, Jiang Cuicui, Pan Xiaoyong. Topology optimization and performance calculation for control arm of vehicle suspension[J]. Automotive Engineering, 2008,30(8):709-712. (in Chinese)
[6]
白中浩,陈天志,曹立波,等.基于正交设计的汽车前纵梁吸能结构的优化[J].汽车工程,2010,32(11):935-939. Bai Zhonghao, Chen Tianzhi, Cao Libo, et al. Optimization of energy-absorbing structure of vehicle front side rail based on orthogonal design[J]. Automotive Engineering, 2010,32(11):935-939. (in Chinese)
[7]
王登峰,张斌,陈静,等.商用车驾驶室白车身焊点缩减拓扑优化研究[J] .汽车工程,2009,31(4):326-330. Wang Dengfeng, Zhang Bin, Chen Jing, et al. A study on topology optimization for the cab BIW of a commercial vehicle aiming at welding spot reduction[J]. Automotive Engineering, 2009,31(4):326-330. (in Chinese)
[8]
贺李平,王国丽,刘建勇,等.汽车减震器弹簧下座的疲劳仿真分析及结构优化[J].北京理工大学学报,2011,31(1):33-37. He Liping, Wang Guoli, Liu Jianyong, et al. Fatige analysis and structural optimization for spring-seat lower automobile strut assembly[J]. Transactions of Beijing Institute of Technolgy, 2011,31(1):33-37. (in Chinese)
[9]
张军,林程,张国明.基于遗传算法的客车车身骨架优化设计[J].北京理工大学学报,2008,28(1):45-49. Zhang Jun,Lin Cheng,Zhang Guoming. An optimizing design method of bus body frame based on genetic algorithm[J]. Transactions of Beijing Institute of Technology,2008,28(1):45-49. (in Chinese)
[10]
吕兆平,闫剑滔,李宏庚,等.基于有限元技术的动力总成悬置支架拓扑优化的研究[J].汽车工程,2009,31(4):321-325. Lü Zhaoping, Yan Jiantao, Li Honggeng, et al. A study on topology optimization of powetrain mount bracket based on finite element technique[J]. Automotive Engineering, 2009,31(4):321-325. (in Chinese)
[11]
潘孝勇,柴国钟,刘飞,等.悬置支架的优化设计与疲劳寿命分析[J].汽车工程,2007,29(4):341-345. Pan Xiaoyong, Chai Guozhong, Liu Fei, et al. Design optimization and fatigue live analysis for transmission mount bracket[J]. Automotive Engineering, 2007,29(4):341-345. (in Chinese)
